Finite element analysis of knee injury risks in car-to-pedestrian impacts

In vehicle-pedestrian collisions, lower extremities of pedestrians are frequently injured by vehicle front structures. In this study, a finite element (FE) model of THUMS (total human model for safety) was modified in order to assess injuries to a pedestrian lower extremity. Dynamic impact responses of the knee joint of the FE model were validated on the basis of data from the literature. Since in real-world accidents, the vehicle bumper can impact the lower extremities in various situations, the relations between lower extremity injury risk and impact conditions, such as between impact location, angle, and impactor stiffness, were analyzed. The FE simulation demonstrated that the motion of the lower extremity may be classified into a contact effect of the impactor and an inertia effect from a thigh or leg. In the contact phase, the stress of the bone is high in the area contacted by the impactor, which can cause fracture. Thus, in this phase the impactor stiffness affects the fracture risk of bone. In the inertia phase, the behavior of the lower extremity depends on the impact locations and angles, and the knee ligament forces become high according to the lower extremity behavior. The force of the collateral ligament is high compared with other knee ligaments, due to knee valgus motions in vehicle-pedestrian collisions.     

Distribution of Polycyclic Aromatic Hydrocarbons (PAHs) and phenolic endocrine disrupting chemicals in South and Southeast Asian mussels

A comprehensive monitoring survey for polycyclic aromatic hydrocarbons (PAHs) and phenolic endocrine disrupting chemicals (EDCs) utilizing mussels as sentinel organisms was conducted in South and Southeast Asia as a part of the Asian Mussel Watch project. Green mussel (Perna viridis) samples collected from a total of 48 locations in India, Indonesia, Singapore, Malaysia, Thailand, Cambodia, Vietnam, and the Philippines during 1994–1999 were analyzed for PAHs, EDCs including nonylphenol (NP), octylphenol (OP) and bisphenol A (BPA), and linear alkylbenzenes (LABs) as molecular markers for sewage. Concentrations of NP ranged from 18 to 643 ng/g-dry tissue. The highest levels of NP in Malaysia, Singapore, the Philippines, and Indonesia were comparable to those observed in Tokyo Bay. Elevated concentrations of EDCs were not observed in Vietnam and Cambodia, probably due to the lower extent of industrialization in these regions. No consistent relationship between concentrations of phenolic EDCs and LABs were found, suggesting that sewage is not a major source of EDCs. Concentrations of PAHs ranged from 11 to 1,133 ng/g-dry, which were categorized as “low to moderate” levels of pollution. The ratio of methylphenanthrenes to phenanthrene (MP/P ratio) was >1.0 in 20 out of 25 locations, indicating extensive input of petrogenic PAHs. This study provides a bench-mark for data on the distribution of anthropogenic contaminants in this region, which is essential in evaluating temporal and spatial variation and effect of future regulatory measures.     

Equity rules for burden sharing in the mitigation process of climate change

Although international negotiation on the mitigation of climate change is a process of determining burden-sharing rules between countries, there has been no clear agreement on equity principles for burden sharing. During the negotiating process up to the Kyoto Protocol, various proposals were made on such burden-sharing rules, but an agreement on emission targets for Annex I countries was achieved without explicitly agree-ing to any rules. In the next phase of the negotiation, debates on emission targets are likely to shift from those between developed countries to those between all parties to the convention. In such a phase, debates on burden-sharing rules will be revisited. The purpose of this paper is: (1) to determine implicitly a formula for the rule for burden sharing between Annex I countries that was considered to be underlying the emission targets of the Kyoto Protocol, and (2) to examine plausible emission targets and timing of commitments for non-Annex I countries in the future by using the result of the analysis on the Kyoto Protocol. A multi-regression method is used for this purpose. It was concluded that the burden sharing between Annex I countries in the Kyoto Protocol can mostly be explained by three variables: the increase in the rate of CO₂ emission during the years 1990 to 2010, the increase in the rate of afforestation between 1990 and 1995, and the GDP per capita at the time of negotiation. The timing of future commitments of developing countries and the levels of targets differ widely, depending on which index or formula is agreed as “equitable”. Some of the developing countries would have to start limiting their emissions within several years if GDP per capita or CO₂ per capita were chosen as the burden-sharing indicator. Developing countries would not have to make commitments until the mid-late 21st century if population growth rate were chosen. If the inferred formula of the Kyoto Protocol were applied to developing countries, they would have had to start mild limitation from 1990.     

RUNOFF VOLUME ESTIMATION USING GIS TECHNIQUES1

ABSTRACT: Rainfall runoff of six watersheds was modeled via the Soil Conservation Service runoff curve number model in two ways: conventionally (manually) and via a geographic information system (GIS). Input data (elevation, soils, and landcover) were digital for the latter method. In contrast to previous studies, the GIS was ised for all phases of the modeling process, including watershed delineation and routing of runoff. A comparison between the two methods was consistent with results reported by others and indicates that the use of a GIS is an acceptable alternative to the conventional method for watersheds lacking relatively flat terrain. Given this limitation, the GIS method may prove advantageous over manual methods when study areas are large or numerous, runoff is modeled repetitively, alternative landcover scenarios are explored, or a digital database already exists for the study area.     

Degradation of a Terephthalate-containing Polyester by Thermophilic Actinomycetes and <Emphasis Type="Italic">Bacillus</Emphasis> Species Derived from Composts

We intended to find thermophilic degraders of terephthalate-containing Biomax^® films. Films in mesh bags were buried in composts (inside temperature: approximately 55–60 °C), resulting in the degradation of them in 2 weeks. Fluorescent microscopy of films recovered from composts showed that microorganisms gradually covered the surface of a film during composting. DGGE analysis of microorganisms on the composted film indicated the presence of Bacillus species as main species (approximately 80% of microbial flora) and actinomycetes (approximately 10–20%) as the second major flora. Isolation of Biomax^®-utilizing bacteria was focused on these two genera: two actinomycetes and one Bacillus species were isolated as pure best degraders from the composted polymer films, which were fragmented into small pieces. All the strains were thermophilic and identified, based on their 16S rDNA analyses. Degradation of polymer films was confirmed by (1) accelerated fragmentation of films in composts, compared with a control (no inoculum) and resultant decrease in molecular weights, (2) growth in a powdered Biomax^® medium, compared with a control without powdered Biomax^®, and (3) production of terephthalate in a powdered Biomax^® medium. In this way, we concluded that these bacteria were useful for degradation of thermostable Biomax^® products.