Photodegradation of gaseous acetaldehyde and methylene blue in aqueous solution with titanium dioxide-loaded activated carbon fiber polymer materials and aquatic plant ecotoxicity tests

TiO₂-supported activated carbon felts (TiO₂–ACFTs) were prepared by dip coating of felts composed of activated carbon fibers (ACFs) with either polyester fibers (PS-A20) and/or a polyethylene pulp (PE-W15) in a TiO₂ aqueous suspension followed by calcination at 250 °C for 1 h. The as-prepared TiO₂–ACFTs with 29–35 wt.% TiO₂ were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and N₂ adsorption. The TiO₂–ACFT(PS-A20) samples with 0 and 29 wt.% TiO₂ were microporous with specific surface areas (S _BET) of 996 and 738 m²/g, respectively, whereas the TiO₂–ACFT(PE-W15) samples with 0 and 35 wt.% TiO₂ were mesoporous with S _BET of 826 and 586 m²/g, respectively. Adsorption and photocatalytic activity of the as-prepared samples were evaluated by measuring adsorption in the dark and photodegradation of gaseous acetaldehyde (AcH) and methylene blue (MB) in aqueous solution under UV light. The TiO₂ loading caused a considerable decrease in the S _BET and MB adsorption capacity along with an increase in MB photodegradation and AcH mineralization. Lemna minor was chosen as a representative aquatic plant for ecotoxicity tests measuring detoxification of water obtained from the MB photodegradation reaction with the TiO₂–ACFT samples under UV light.     

Brominated flame retardants and polychlorinated biphenyls in human breast milk from several locations in India: potential contaminant sources in a municipal dumping site

This study investigated the status of contamination of organohalogen compounds (OCs) such as polychlorinated biphenyls (PCBs) and brominated flame retardant (BFRs), including polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) in human milk samples from several locations in India. The levels of OCs were significantly higher in the milk of mothers living in and near municipal dumping site than other locations indicating that the open dumping sites for municipal wastes act as potential sources of these contaminants in India. The PCB concentrations observed in this study tended to decrease compared to those in the matched locations reported previously, probably due to the restriction of technical PCB usage in India. PBDE levels in human milk were two to three folds lower than those of PCBs in all the sampling locations investigated. Congener profiles of PCBs and PBDEs were different between samples from the dumping site mothers and general populations in other areas suggesting the presence of region-specific sources and pathways. HBCDs were detected in human milk from only two sites, with much lower concentrations and detection frequencies compared to PCBs and PBDEs. When hazard quotients (HQs) of PCBs and PBDEs were estimated for infant health risk, the HQs in some milk samples from the dumping site exceeded the threshold value (HQ > 1) of PCBs, indicating the potential risk for infants in the specific site.     

Characteristics of azaarenes and dioxins in gases emitted from waste incinerators

In this study, we propose an analytical method to determine the fourteen of azaarenes present in flue gas samples collected according to Japanese Industrial Standard K 0311, which designates the method for the determination of dioxins in flue gas. Azaarenes can be analyzed using the acidic water phase after shaking extraction with dichloromethane, which is unnecessary for dioxin analysis. Flue gas samples were obtained from 24 waste incinerators in Japan, and azaarenes were detected in all the flue gas samples (0.21–3800 μg/m³ _N). The most abundant of the detected compounds were quinoline and isoquinoline. The concentration of azaarenes had a tendency to increase with that of polychlorinated dibenzo-p-dioxins and dibenzofurans. The isomer distribution of heptachloro-dibenzofurans (HpCDFs) was calculated using the computed Gibbs energy of formation (ΔG _f ) obtained by the semiempirical molecular orbital method at various temperatures. The calculated isomer distribution was fitted to the measured value of HpCDFs. It seems that the temperature obtained from the fitting calculations is an indicator of the cooling capacity of the combustion gas in an incinerator. The computed ΔG _f also explained the measured isomer distributions of azaarenes. It is suggested that the isomer distribution of azaarenes in the combustion process is thermodynamically controlled. This work was presented in part at the International Conference on Combustion, Incineration/Pyrolysis, and Emission Control, 2006, Kyoto     

Distribution of Polycyclic Aromatic Hydrocarbons (PAHs) and phenolic endocrine disrupting chemicals in South and Southeast Asian mussels

A comprehensive monitoring survey for polycyclic aromatic hydrocarbons (PAHs) and phenolic endocrine disrupting chemicals (EDCs) utilizing mussels as sentinel organisms was conducted in South and Southeast Asia as a part of the Asian Mussel Watch project. Green mussel (Perna viridis) samples collected from a total of 48 locations in India, Indonesia, Singapore, Malaysia, Thailand, Cambodia, Vietnam, and the Philippines during 1994–1999 were analyzed for PAHs, EDCs including nonylphenol (NP), octylphenol (OP) and bisphenol A (BPA), and linear alkylbenzenes (LABs) as molecular markers for sewage. Concentrations of NP ranged from 18 to 643 ng/g-dry tissue. The highest levels of NP in Malaysia, Singapore, the Philippines, and Indonesia were comparable to those observed in Tokyo Bay. Elevated concentrations of EDCs were not observed in Vietnam and Cambodia, probably due to the lower extent of industrialization in these regions. No consistent relationship between concentrations of phenolic EDCs and LABs were found, suggesting that sewage is not a major source of EDCs. Concentrations of PAHs ranged from 11 to 1,133 ng/g-dry, which were categorized as “low to moderate” levels of pollution. The ratio of methylphenanthrenes to phenanthrene (MP/P ratio) was >1.0 in 20 out of 25 locations, indicating extensive input of petrogenic PAHs. This study provides a bench-mark for data on the distribution of anthropogenic contaminants in this region, which is essential in evaluating temporal and spatial variation and effect of future regulatory measures.     

Spatial distribution and vertical profile of polybrominated diphenyl ethers and hexabromocyclododecanes in sediment core from Tokyo Bay, Japan

Brominated flame retardants (BFRs), hexabromocyclododecanes (HBCDs) and polybrominated diethyl ethers (PBDEs) were detected in three sediment cores and six surface sediments of Tokyo Bay, Japan. HBCDs were detected for the first time in this region with concentrations ranging from 0.056 to 2.3 ng/g dry wt, implying their widespread contamination, even though their concentrations were lower than summation operatorPBDEs (di- to nona-BDEs) and BDE-209. Levels of these compounds were higher near to the highly populated industrial area of the bay implicating industrial and human activities as sources of these compounds. Summation operatorPBDEs increased in the sediment layer up to the mid-1990s and decreased afterwards, whereas BDE-209 showed an increasing trend until now, following the usage of different commercial BDE mixtures. HBCDs first appeared in the mid-1970s and increased until today. The annual surficial flux of HBCDs (0.62-2.4 ng/cm2/yr) is equal to summation operatorPBDEs (0.95-2.6 ng/cm2/yr) but lower than that of BDE-209 (17-58 ng/cm2/yr).     

Characterization of polychlorinated biphenyls and brominated flame retardants in surface soils from Surabaya, Indonesia

In this study, soil contamination by PCBs, PBDEs, HBCDs and two novel BFRs such as 1,2-bis-(2,4,6-tribromopenoxy) ethane (BTBPE) and decabromodiphenyl ethane (DBDPE) in various locations such as industrial, urban, rural, dumping site and agricultural areas of Surabaya, Indonesia has been characterized in order to evaluate their contamination status, profiles, potential sources, fate and behavior. Range and median concentrations of PCBs, PBDEs, HBCDs, BTBPE and DBDPE were ND - 9.6 (1.2), 0.069 - 24 (7.4), ND - 1.8 (0.48), ND - 1.7 (0.14) and ND - 7.6 (2.2) ng g⁻¹ dw, respectively. Industrial, urban and dumping areas were inventoried as the main sources of these pollutants. Decreasing gradient levels were observed for these contaminants from industrial district, urban, dumping site, rural and agricultural areas, in that order. Furthermore, organic carbon contents and proximity to the point sources were found as the major controlling factors. Contaminant profiles were characterized by the predominance of hexa-, hepta- and penta-homologues for PCBs; deca-, nona- and octa- for PBDEs and α-isomer for HBCDs. Product mixtures such as Ar1260/KC600 and Ar1254/KC500 for PCBs, deca- and octa-BDEs for PBDEs were the possible common formulations used in study area. To our knowledge, this is a first comprehensive study on characterization of soil contamination by PCBs, PBDEs and HBCDs together with two novel BFRs in a highly industrialized city located in tropical region. This study provides baseline information for establishing national monitoring programs in Indonesia.     

Anthropogenic and naturally occurring polybrominated phenolic compounds in the blood of cetaceans stranded along Japanese coastal waters

We determined the residue levels and patterns of hydroxylated polybrominated diphenyl ethers (OH-PBDEs), and related compounds, such as PBDEs, methoxylated PBDEs (MeO-PBDEs), and bromophenols (BPhs) in the blood of eleven cetacean species stranded along the Japanese coasts. The dominant OH- and MeO-PBDE isomers found in all cetaceans were 6OH-BDE47 and 6MeO-BDE47. Additionally, 2,4,6-triBPh was dominant isomer in all cetaceans. In contrast, specific differences in the distribution of para- and meta- OH-PBDE isomers and some BPhs (potential PBDEs metabolites) were found among the cetaceans.Residue levels of ΣMeO-PBDEs and 6OH-BDE47 + 2′OH-BDE68, and 2,4,6-triBPh and 6OH-BDE47 + 2′OH-BDE68 showed a significant positive correlation. These results may suggest that the large percentages of OH-PBDEs, MeO-PBDEs and 2,4,6-triBPh might share common source (i.e. biosynthesis by marine organisms), or metabolic pathway in cetacean species. Significant correlations were found between the concentrations of BDE99 and 2,4,5-triBPh. This result suggested that 2,4,5-triBPh in cetaceans could be a metabolite of BDE99.     

Research to develop a predicting system of mammalian subacute toxicity (3) construction of a predictive toxicokinetics model

A new predictive toxicokinetics model was developed to estimate subacute toxicity (target organs, severity, etc.) of non-congeneric industrial chemicals, where the chemical structures and physico-chemical properties are only available. Thus, a physiological pharmacokinetics model, which consists of blood, liver, kidney (these were experimentally found as major toxicological targets), muscle and fat compartments , was established to simulate the chemical concentrations in organs/tissues with pharmacokinetic parameters by means of Runge-Kutta-Gill algorithm. The pliarmacokinetic parameters, i.e. absorption rate, absorption ratio, hepatic extraction ratio of metabolism and renal clearance were calculated by using separately established Quantitative Structure-Pharmacokinetics Relationship equations. The developed predictive model was then applied to simulations of 43 non-congeneric industrial chemicals. The chemical concentrations in organs/tissues after single oral administration were simulated, and their maximum concentrations (Cmax's) and area tinder the concentration-time curves (AUC's) were calculated.Fast Inverse Laplace Transform was newly applied for the purpose of simulation of 28-day repeated dose toxicity.Simulated concentrations of 28 days repeated dose were, however, found to be the same as those of simple repetitions of a single administration per day because of the short half-lives of non-congeneric industrial chemicals.A comparison of subacute toxicity data with Cmax's and AUC's in a single dose scenario suggested that the organs/tissues with relatively high concentrations of tested chemical substances were the most sensitive targets within a chemical.Chemical concentrations in liver, for instance, were correlated with the severity of hepatotoxicity among the chemicals. It was also suggested that to improve and widen the present approach, data of metabolite and reactivity of non-congeneric industrial chemicals to organs/tissues, receptors, etc. should be incorporated into the model.     

低C/N比污水生物脱氮所需外加碳源量的确定

利用中试规模实验装置,探讨了现有活性污泥工艺改造成间歇曝气生物脱氮工艺的实践中,碳氮比(C/N)对废水生物脱氮效率、脱氮反应速度的影响,分析了脱氮容量,确定了所需外加碳源量.      

Emission control for precursors causing acid rain (V): Improvement of acid soil with the bio-briquette combustion ash

The bio-briquette technique which mixes coal, biomass and sulfur fixation agent and bio-briquettes under 3-5 t/cm^2 line pressure has aroused people‘s attention in view of controlling the air pollution and the acid rain. In this paper, the physicochemical properties of bio-briquette and its ash were investigated. And the acid soil was improved by the bio-briquette combustion ash, which contained nutritive substances such as P, N, K and had the acid-neutralizing capacity(ANC). The pH, EC, effective nutrient elements(Ca, Mg, K, P and N), heavy metal elements(AI, Cu, Cd, Cr, Zn and Mn) and acid-neutralizing capacity change of ash-added soils within the range of 0-10%, were also studied. Specially, when 5% bio-briquette combustion ash was added to the tested soil, the content of the effective elements such as Ca, Mg and K rose by 100 times, ? times and twice, respectively. The total nitrogen also increased by about twice. The results showed the oxyanions such as that of AI, Cu, Cd, Cr, Zn and Mn were not potentially dangerous, because they were about the same as the averages of them in Chinese soil. It is shown that the ANC became stronger, though the ANC hardly increases in the ash-added soil. On the basis of the evaluation indices, it is concluded that the best mixture ratio is to add 2.5%--8% of the bio-briquette combustion ash to the tested soil.