In situ formation of bimetallic FeNi nanoparticles on sand through green technology: Application for tetracycline removal

• In situ preparation of FeNi nanoparticles on the sand via green synthesis approach. • Removal of tetracycline using GS-FeNi in batch and column study. • Both reductive degradation and sorption played crucial role the process. • Reusability of GS-FeNi showed about 77.39±4.3% removal on 4th cycle. • TC by-products after interaction showed less toxic as compared with TC. In this study, FeNi nanoparticles were green synthesized using Punica granatum (pomegranate) peel extract, and these nanoparticles were also formed in situ over quartz sand (GS-FeNi) for removal of tetracycline (TC). Under the optimized operating conditions, (GS-FeNi concentration: 1.5% w/v; concentration of TC: 20 mg/L; interaction period: 180 min), 99±0.2% TC removal was achieved in the batch reactor. The removal capacity was 181±1 mg/g. A detailed characterization of the sorbent and the solution before and after the interaction revealed that the removal mechanism(s) involved both the sorption and degradation of TC. The reusability of reactant was assessed for four cycles of operation, and 77±4% of TC removal was obtained in the cycle. To judge the environmental sustainability of the process, residual toxicity assay of the interacted TC solution was performed with indicator bacteria (Bacillus and Pseudomonas) and algae (Chlorella sp.), which confirmed a substantial decrease in the toxicity. The continuous column studies were undertaken in the packed bed reactors using GS-FeNi. Employing the optimized conditions, quite high removal efficiency (978±5 mg/g) was obtained in the columns. The application of GS-FeNi for antibiotic removal was further evaluated in lake water, tap water, and ground water spiked with TC, and the removal capacity achieved was found to be 781±5, 712±5, and 687±3 mg/g, respectively. This work can pave the way for treatment of antibiotics and other pollutants in the reactors using novel green composites prepared from fruit wastes.     

Effect of phytohormones on the growth dynamics and macromolecular contents of two extreme halophilic Cyanobacteria (Phormidium sps)

Two non-heterocystous, filamentous solar saltern extreme halophilic cyanobacteria viz., Phormidium tenue and Phormidium fragile were allowed to grow in different concentrations of phytohormones. Among the phytohormones, Indole-3 acetic acid and Indole-3-butyric acid at 0. l ppm concentration enhanced the growth, pigments and carbohydrate content in P. fragile. The phycobiliprotein production was found higher at 0. l ppm concentration of Indole-3-acetic acid in P. tenue, whereas Indole-3-butyric acid at 50 ppm and 0. 1 ppm concentrations proved to be inhibitory in the protein and carbohydrate contents in P. tenue.     

The pattern of cadmium in the environment of five Minnesota cities

This paper reports on the cadmium results of a soil survey conducted by the State of Minnesota during the summer of 1986. The survey collected soil-dust trom the oldest census tracts of Minneapolis, St. Paul, Duluth, St. Cloud and Rochester. The results reveal fundamental differences in soil cadmium among cities. Soil cadmium exceeds 2 g g^–1 in 8.4% of the samples in Minneapolis, and 7.0, 4.0, 3.3 and 1.5% respectively of the samples collected in St. Paul, Duluth, St. Cloud and Rochester. Minneapolis and St. Paul residential houseside soil samples had cadmium levels that exceeded 2 g g^–1 in 24.5 and 21.2% respectively of the samples collected. By comparison, the Minneapolis and St. Paul residential streetside soil samples had cadmium levels that exceeded 2 g g^–1 in 1.2 and 0.6%, respectively, of the samples collected. Also the Minneapolis and St. Paul residential midyard soil samples had cadmium levels that exceeded 2 g g^–1 in 1.9 and 5.5%, respectively, of the samples collected. Cadmium levels for the combined data for all cities and communities in Minneapolis appears to be directly related to traffic flow. However, cadmium levels around housesides and in midyards do not follow patterns of traffic flow in the same manner as cadmium content of soils along streetsides. St. Paul has an anomalously high cadmium content toward the east of the city compared with the west side of the city. The Pigs Eye sewage sludge incinerator located east of the city is the most likely source of cadmium to cause this pattern. This study provides essential urban background information about both the fundamental environmental patterns of cadmium as well as processes which appear to operate to cause those patterns.     

Antimicrobial activity of tissue and associated bacteria from benthic sea anemone Stichodactyla haddoni against microbial pathogens

Associated bacteria from Stichodactyla haddoni are found maximum in tentacle tissues than the body tissue. There are eight associated bacterial species viz., Alcaligenes sp, Corynebacterium sp, Aeromonas sp, Sporosarcina sp, Renibacterium sp, Camobacterium sp1, Camobacterium sp2 and Salinococcus sp were recorded. The culture extracts from the associated bacterial species showed sensitivity against human bacterial and fungalpathogens. However, the hexane tissue extract of sea anemone showed maximum sensitivity (24 mm dia.) against the fish bacterial pathogen Aeromonas hydrophila than the other chosen pathogens. Comparatively the tissue extracts showed promising antimicrobial sensitivity than the cell free extracts of associated bacteria, and hence, the tissue samples from the sea anemone Stichodactyla haddoni is recommended for further exploration of novel antimicrobial drugs than the associated bacteria.     

Metabolic dysregulation and inhibition of spermatogenesis by gibberellic acid in rat testicular cells

Enzymatic and histological change in the testicular cells of rats treated orally and intradermally for 45 days with gibberellic acid (GBA) in independent studies is reported. Assay of hexokinase (HK), acid phosphatase (AcP) and alkaline phosphatase (AkP) in rat testicular tissue homogenate preparations yielded results that suggested changes in these enzyme activities relative to their respective controls. Histological studies showed loss of germ cells, derangement of the germinal cells, and reduction in the size of the seminiferous tubules and dystrophy of Leydig cells. More importantly decreased sperm count in the lumen was observed. A dysregulatory role is thus established for GBA in rat testicular cell function. This compound may serve as an inhibitor of testicular cell function.     

Growth of Avicennia marina and Ceriops decandra seedlings inoculated with halophilic azotobacters

Inoculation of azotobacter has significant positive effects on the growth characteristics and pigments in mangrove seedlings of Avicennia marina and Ceriops decandra. The bacterial inoculation significantly increased the root dry biomass at the maximum of 75.8% at 30 gl(-1) salinity in Ceriops decandra. But in Avicennia marina, the shoot dry biomass was increased significantly at the maximum of 56.12% at 30 gl(-1) salinity in general, the Azotobacter beijerinkii improved the growth characteristics better in both species of mangroves preferably at higher salinity levels in A. marina and at a range of salinity in C. decandra. The results recommend this forraising vigorous seedlings under nursery conditions.     

The impact of photovoltaic (PV) installations on downwind particulate matter concentrations: Results from field observations at a 550-MWAC utility-scale PV plant

With utility-scale photovoltaic (PV) projects increasingly developed in dry and dust-prone geographies with high solar insolation, there is a critical need to analyze the impacts of PV installations on the resulting particulate matter (PM) concentrations, which have environmental and health impacts. This study is the first to quantify the impact of a utility-scale PV plant on PM concentrations downwind of the project site. Background, construction, and post-construction PM_2.5 and PM₁₀ (PM with aerodynamic diameters <2.5 and <10 μm, respectively) concentration data were collected from four beta attenuation monitor (BAM) stations over 3 yr. Based on these data, the authors evaluate the hypothesis that PM emissions from land occupied by a utility-scale PV installation are reduced after project construction through a wind-shielding effect. The results show that the (1) confidence intervals of the mean PM concentrations during construction overlap with or are lower than background concentrations for three of the four BAM stations; and (2) post-construction PM_2.5 and PM₁₀ concentrations downwind of the PV installation are significantly lower than the background concentrations at three of the four BAM stations. At the fourth BAM station, downwind post-construction PM_2.5 and PM₁₀ concentrations increased marginally by 5.7% and 2.6% of the 24-hr ambient air quality standards defined by the U.S. Environmental Protection Agency, respectively, when compared with background concentrations, with the PM_2.5 increase being statistically insignificant. This increase may be due to vehicular emissions from an access road near the southwest corner of the site or a drainage berm near the south station. The findings demonstrate the overall environmental benefit of downwind PM emission abatement from a utility-scale PV installation in desert conditions due to wind shielding. With PM emission reductions observed within 10 months of completion of construction, post-construction monitoring of downwind PM levels may be reduced to a 1-yr period for other projects with similar soil and weather conditions.

Implications: This study is the first to analyze impact of a utility photovoltaic (PV) project on downwind particulate matter (PM) concentration in desert conditions. The PM data were collected at four beta attenuation monitor stations over a 3-yr period. The post-construction PM concentrations are lower than background concentrations at three of four stations, therefore supporting the hypothesis of post-construction wind shielding from PV installations. With PM emission reductions observed within 10 months of completion of construction, postconstruction monitoring of downwind PM levels may be reduced to a 1-yr period for other PV projects with similar soil and weather conditions.     

Preparation and characterisation of green clay-polymer nanocomposite for heavy metals removal

ABSTRACT

Natural polymer Moringa oleifera seed as coagulant and bentonite clay as adsorbent were used for preparing novel composite coagulant. Results obtained from FTIR, SEM, TEM and P-XRD show that the bentonite clay and M. oleifera seed biopolymers physico-chemically interact with each other during the preparation of clay-polymer composite. The FTIR results show that the major functional groups present in bentonite clay and M. oleifera seed are integrated at nano levels in the novel composite to remove heavy metals from aqueous systems. The coagulo-adsorption using clay-polymer composite may be used for the adsorption of heavy metals ions from the aqueous systems. It becomes possible due to the structural characteristics of the clay crystallites together with the functional attraction of the biopolymer and it results in the formation of clay-polymer metal complexes. The clay-polymer nano-composite of M. oleifera seed and bentonite clay showed considerable cadmium, chromium and lead removal property.     

Major ion chemistry and hydrochemical studies of groundwater of Bangalore South Taluk, India

Groundwater is almost globally important for human consumption as well as for the support of habitat and for maintaining the quality of base flow to rivers, while its quality assessment is essential to ensure sustainable safe use of the resources for drinking, agricultural, and industrial purposes. In the current study, 28 groundwater samples were collected around Vrishabhavathi valley region of Bangalore South Taluk to assess water quality and investigate hydrochemical nature by analyzing the major cations (Ca^2?+?, Mg^2?+?, Na^?+?, K^?+?) and anions $(\text{HCO}_{3}^{-}$ , Cl^???, F^???, $\text{SO}_{4}^{2-}$ , $\text{NO}_{3}^{-}$ , $\text{PO}_{4}^{3-}$ , $\text{CO}_{3}^{2-})$ besides some physical and chemical parameters (pH, electrical conductivity, alkalinity, and total hardness). Also, geographic information system-based groundwater quality mapping in the form of visually communicating contour maps was developed to delineate spatial variation in physico-chemical characteristics of groundwater samples. Piper trilinear diagram was constructed to identify groundwater groups (hydrochemical facies) using major anionic and cationic concentration and it was found that majority of the samples belongs to $\text{Ca}^{2+}-\text{Mg}^{2+}-\text{Cl}^{-}-\text{SO}_{4}^{2-}$ and $\text{Ca}^{2+}-\text{Mg}^{2+}-\text{HCO}_{3}^{-}$ hydrochemical facies. Wilcox classification and US Salinity Laboratory hazard diagram suggests that 92.86% of the samples were falling under good to permissible category and C3–S1 groups, respectively, indicating high salinity/low sodium.     

Geochemistry of groundwater and groundwater prospects evaluation, Anekal Taluk, Bangalore Urban District, Karnataka, India

Anekal Taluk lies in the southern part of the of Bangalore urban district, known for Bannerghatta wildlife sanctuary, Jigani industrial estate, silk industry, and the electronics city, the pride of India and hub of Bangalore's information technology. In the present study, evaluation of geochemistry of 28 representative bore wells samples from Anekal Taluk was undertaken. It was found that most of the samples (92.9%) belong to Ca(2+?)-Mg(2+?)-Cl(?-?) -SO2??water type with Ca-Mg-Cl and Ca-Cl hydrochemical facies. The groundwater sources were further categorized as normal chloride (32.14%) and normal sulfate (100%) water types based on Cl and SO(4) concentrations. Majority of the samples (64.3%) belong to C3-S1 water class, indicating water with high salinity and low sodium. Positive index of base exchange indicates the chloro-alkaline equilibrium in the study area. Groundwater potential zonation map for Anekal Taluk was generated using multiparametric and weighted overlay method using the spatial analyst tool in ArcGIS v9.2. Accordingly, five distinct classes corresponding to good(high), moderate (medium), moderate to poor (low), poor (very low), and poor to nil (very low) groundwater potential zones were identified in the region. Of this, 85.27% of the study area belongs to good/high to moderate/medium groundwater potential and only 14.73% belonging to moderate/poor to nil groundwater potential zones.