One-Component Spray Polyurethane Foam from Liquefied Pinewood Polyols: Pursuing Eco-Friendly Materials

The use of petroleum-derived products should be avoided regarding the principles of green and sustainable chemistry. The work reported herein, is aimed at the liquefaction of pine shavings for the production of an environmentally-friendly polyol suitable to be used in the formulations of sprayable polyurethane foams. The biopolyols were obtained in high yield and were used to replace those derived from fossil sources, to produce more “greener” polyurethane foams and therefore, less dependent on petroleum sources, since the polyol component was substituted by products resulting from biomass liquefaction. The partial and fully exchange of the polyols was accomplished, and the results compared with a reference foam. The foams were afterward, chemical, physical, morphological, and mechanically characterized. The complete replacement of polyether polyol and polyol polyester has presented some similar characteristics as that used as a reference, validating that the path chosen for the development of more sustainable materials is on the right track for the contribution to a cleaner world.     

Vertical growth in a coastal city: an analysis of Boa Viagem (Recife,Brazil)

Coastal zones around the world have experienced urban growth in the last 50 years. This landscape change brings new aspects for those zones and the environment. Real estate speculation is a decisive factor that changes landscape, with urban growth that occurs both in the extent and volume of construction. Boa Viagem (BV) beach at Recife, Northeast Brazil was just a sand bar covered by an Atlantic Forest until middle of the 1800s. Today, it has turned into a busy area of the city where residences, services and commerce co-exist in a densely packed arrangement. This work demonstrates and analyses vertical growth in BV and urban changes from 1961 to 2011. It was developed using digital image processing and visual analysis of satellite imagery and aerial photos. A GIS was created using SPRING and ArcScene, to calculate variations in area and volume creating a Volumetric Index (VI). The Minimal Mapping Area was used in sixteen census tract as samples of the area. Occupation and vertical growth were especially accentuated from 1981 to 1996 with the peak at 2011. Increases in vertical growth from shore to inland are evident in all parts of the district. This finding was confirmed by three-dimensional GIS representations of the study area and the VI during the period of this work, showing the potential of 3D GIS models for studying dense urbanization areas in coastal zones.     

Surveying drainage culvert use by carnivores: sampling design and cost�Cbenefit analyzes of track-pads vs. video-surveillance methods

Environmental assessment studies often evaluate the effectiveness of drainage culverts as habitat linkages for species, however, the efficiency of the sampling designs and the survey methods are not known. Our main goal was to estimate the most cost-effective monitoring method for sampling carnivore culvert using track-pads and video-surveillance. We estimated the most efficient (lower costs and high detection success) interval between visits (days) when using track-pads and also determined the advantages of using each method. In 2006, we selected two highways in southern Portugal and sampled 15 culverts over two 10-day sampling periods (spring and summer). Using the track-pad method, 90% of the animal tracks were detected using a 2-day interval between visits. We recorded a higher number of crossings for most species using video-surveillance (n = 129) when compared with the track-pad technique (n = 102); however, the detection ability using the video-surveillance method varied with type of structure and species. More crossings were detected in circular culverts (1 m and 1.5 m diameter) than in box culverts (2 m to 4 m width), likely because video cameras had a reduced vision coverage area. On the other hand, carnivore species with small feet such as the common genet Genetta genetta were detected less often using the track-pad surveying method. The cost-benefit analyzes shows that the track-pad technique is the most appropriate technique, but video-surveillance allows year-round surveys as well as the behavior response analyzes of species using crossing structures.     

Direct and efficient liquefaction of potato peel into bio-oil

The world has become dependent on petroleum as a feedstock for most products that we use in our daily lives. As an alternative, bio-refineries that transform biomass into biofuels and primary chemicals are emerging. Actually, many wastes are not fully recycled. For instance, potato peel is a cheap residue available from the potato industry. Up to now, potato peel has been used mostly for livestock feeding. Here, potato peel waste was subjected to direct acid liquefaction at 160 °C in 2-ethylhexanol and diethylene glycol using p-toluene sulfonic acid as catalyst. The product was characterized by infrared spectroscopy, chemical analysis, hydroxyl number and acid value. Results show that liquefaction was achieved in yields higher than 80%. The reactional profile shows two time zones, one comprising the process of liquefaction and one corresponding to the process of decomposition. Kinetics indicate that the liquefaction process occurs 1.9 times faster than the decomposition process. Overall, our findings show for the first time that, despite the water content, potato peel waste can be used to produce bio-oil. The products can be further used as fuels or refined chemicals such as levulinic acid, furfural, 5-hydroxyfurfural, dimethyl furfural and sugars in fermentation processes.     

Pesticide residues in Portuguese strawberries grown in 2009–2010 using integrated pest management and organic farming

Pesticides are among the most widely used chemicals in the world. Because of the widespread use of agricultural chemicals in food production, people are exposed to low levels of pesticide residues through their diets. Scientists do not yet have a total understanding of the health effects of these pesticide residues. This work aims to determine differences in terms of pesticide residue content in Portuguese strawberries grown using different agriculture practices. The Quick, Easy, Cheap, Effective, Rugged, and Safe sample preparation method was conducted and shown to have good performance for multiclass pesticides extraction in strawberries. The screening of 25 pesticides residue was performed by gas chromatography?Ctandem mass spectrometry. In quantitative validation, acceptable performances were achieved with recoveries of 70?C120 and <12?% residual standard deviation for 25 pesticides. Good linearity was obtained for all the target compounds, with highly satisfactory repeatability. The limits of detection were in the range of 0.1?C28???g/kg. The method was applied to analyze strawberry samples from organic and integrated pest management (IPM) practices harvested in 2009?C2010. The results showed the presence of fludioxonil, bifenthrin, mepanipyrim, tolylfluanid, cyprodinil, tetraconazole, and malathion when using IPM below the maximum residue levels.     

Towards effective culvert design: monitoring seasonal use and behavior by Mediterranean mesocarnivores

Drainage culverts are known to be used by a diverse number of species. To date, most studies looking at culvert usage have been restricted to the dry season. This seasonal bias has limited our understanding of how different species respond to culverts and, consequently, our ability to find effective ways to promote the use of culverts as aids to species movement. The main goal of this study was to examine the role of highway culverts for mesocarnivores throughout the year. We addressed (1) the seasonality of culvert use, (2) the relative importance of culvert structure, highway features, and surrounding landscape on culvert use, (3) the influence of the water depth and cover on culvert use, and (4) the effect of culvert structure on individual behavior. Fifteen culverts were monitored along 2 highways in southern Portugal using video-surveillance cameras and marble dust for 10 consecutive days per season. We used generalized linear mixed models to determine which factors most affected the culvert use and behavior by mesocarnivores. Our results highlight the effect of seasonality and water on culvert use. Culvert use was positively related with species activity throughout the year. All species (except otters (Lutra lutra)) were less likely to use culverts that contained water more than 3 cm deep or covering more than 70 % of the culvert base. Based on our results, future surveys and culvert retrofit design should address (1) the importance of seasonality in the interpretation of results and (2) the complementarity of culvert-specific features (water, ledges, and naturalization).     

Low mating frequency of queens in the stingless bee<Emphasis Type="Italic"> Scaptotrigona postica</Emphasis><Superscript>1</Superscript> and worker maternity of males

Kin selection models of intracolonial conflict over the maternity of males predict that social hymenopteran workers should favour the production of sons and nephews over brothers when the effective mating frequency (m_e) of the queen is low (m_e<2) but that they should police other workers' reproductive efforts and favour the production of brothers when m_e>2. Stingless bees have been used to support these models in that m_e within the group is considered low and workers are thought often to monopolise the parentage of males. We genetically analysed 20 worker and 20 male pupae from each of 10 colonies of the stingless bee Scaptotrigona postica (= Scaptotrigona aff. depilis) using six microsatellite loci and demonstrate queen monandry in eight nests and apparent low m_e in the other two. However, four colonies contained an additional matriline, possibly due to queen supersedure (serial polygyny), which complicated their genetic structure. Across colonies, workers were responsible for the maternity of 13% of all males. These data are broadly in agreement with predictions from kin selection theory, though the question remains open as to why workers do not secure a greater share of male maternity in this and other stingless bee species in which workers are more closely related to nephews than brothers.     

Predatory behavior in a necrophagous bee<Emphasis Type="Italic"> Trigona hypogea</Emphasis> (Hymenoptera; Apidae,Meliponini)

Although most bees feed on nectar and pollen, several exceptions have been reported. The strangest of all is the habit found in some neotropical stingless bees, which have completely replaced pollen-eating by eating animal protein from corpses. For more than 20 years, it was believed that carrion was the only protein source for these bees. We report that these bees feed not only off dead animals, but on the living brood of social wasps and possibly other similar sources. Using well developed prey location and foraging behaviors, necrophagous bees discover recently abandoned wasps nests and, within a few hours, prey upon all immatures found there.     

Stable relatedness structure of the large-colony swarm-founding wasp Polybia paulista

In social-insect colonies, cooperation among nestmates is generally stabilized by their high genetic similarity. Thus, fitness gained through cooperation drops quickly as the number of reproductive females (queens) increases. In this respect, wasps of the tribe Epiponini have attracted special attention, because the colonies have tens, or even hundreds of queens. It has been empirically or genetically confirmed that relatedness within nestmates can be elevated by a mechanism known as cyclical monogyny, under which new queens are produced only after the number of old queens is reduced to one. Another likely factor that can increase relatedness within nestmates under polygyny is comb partitioning by queens. If queens concentrate their egg laying on one or a subset of the available combs, then workers may be able to rear closer relatives by focusing their work on the comb where they emerged. Using microsatellite markers, we tested the hypotheses of cyclical monogyny and comb partitioning by queens increasing relatedness within nestmates under polygyny in the large-colony epiponine wasp, Polybia paulista. There were no significant differences between relatedness within combs and between combs, and thus we ruled out the possibility that each queen partitions reproduction between combs. However, as cyclical monogyny predicts, a lower effective number of queens contributed to queen production than to worker production. Cyclical monogyny explained well the observed smaller effective number of queens for new queens than that for workers, but failed to explain the stable relatedness values throughout colony cycles.Communicated by L. Keller