Prediction of flange wrinkling in deep drawing process using bifurcation criterion

Surface distortions in the form of wrinkles are often observed in sheet metals during stamping and other forming operations. Because of the trend in recent years towards thinner, higher-strength sheet metals, wrinkling is increasingly becoming a more common and troublesome mode of failure in sheet metal forming. The prediction and prevention of wrinkling during a sheet forming process are important issues for the design of part geometry and processing parameters. This paper treats the phenomenon of flange wrinkling as a bifurcated solution of the equations governing the deep drawing problem when the flat position of the flange becomes unstable. Hill’s bifurcation criterion is used to predict the onset of flange wrinkling in circular and square cup drawing. In particular, the maximum cup height that can be drawn without the onset of flange wrinkling is predicted for the given set of process parameters. A parametric study of the maximum cup height is also carried out with respect to various geometric, material and process parameters. Finite element formulation, based on the updated Lagrangian approach, is employed for the analysis. The incremental logarithmic strain measure, which allows the use of a large incremental deformation, is used. The stresses are updated in a material frame. The material is assumed to be elastic–plastic, strain hardening, yielding according to an anisotropic yield criterion of Barlat et al. (2005) [23] (named as Yld2004-18p). Isotropic power law hardening is assumed. Inertia forces are neglected due to small accelerations. Modified Newton–Raphson iterative technique is used to solve the nonlinear incremental equations.     

Optimization of Pellet Production from Agro-Industrial By-Products: Effect of Plasticizers on Properties of Pellets and Composite Pots

The present study aimed to optimize the pellets formulation (deoiled rice bran, potato peel powder and plasticizers) for the development of the injection molded pots. The maximum hardness and bulk density (desirable responses) were obtained for pellets having 100 g of deoiled rice bran, 100 g potato peel powder and 14 % of cashew nut shell liquid (CNSL) as well as 14 % of glycerol (GL) (on raw material basis). The optimized pellets and the pots developed from them were characterized for their physico-chemical, functional, rheological and morphological properties. Expansion ratio, pellet durability index and hardness of the pellets with 14 % CNSL were found to be 1.097, 98.647 % and 485.551 N, respectively. For pellets with 14 % GL expansion ratio, pellet durability index and hardness were found to be 1.150, 97.747 % and 462.949 N, respectively. The biodegradation analysis of the pots developed from optimized pellets with 14 % CNSL and GL degraded in 11 and 9 weeks, respectively. Porosity, puncture force, density and hardness of ‘AP’ pots were 27.473 %, 495.731 N, 1.549 g/ml and 542.641 N, respectively. However, for ‘BP’ pots, the porosity, puncture force, density and hardness were 32.548 %, 440.149 N, 1.191 g/ml and 507.841 N, respectively. Pots prepared from 14 % CNSL (AP) were better in physical and mechanical properties as compared to pots developed from glycerol.     

The influence of diesel—truck exhaust particles on the kinetics of the atmospheric oxidation of dissolved sulfur dioxide by oxygen

The automobile exhausts are one of the major sources of particulate matter in urban areas and these particles are known to influence the atmospheric chemistry in a variety of ways. Because of this, the oxidation of dissolved sulfur dioxide by oxygen was studied in aqueous suspensions of particulates, obtained by scraping the particles deposited inside a diesel truck exhaust pipe (DEP). A variation in pH showed the rate to increase with increase in pH from 5.22 to about ～6.3 and to decrease thereafter becoming very slow at pH?=?8.2. In acetate-buffered medium, the reaction rate was higher than the rate in unbuffered medium at the same pH. Further, the rate was found to be higher in suspension than in the leachate under otherwise identical conditions. And, the reaction rate in the blank reaction was the slowest. This appears to be due to catalysis by leached metal ions in leachate and due to catalysis by leached metal ions and particulate surface both in suspensions. The kinetics of dissolved SO₂ oxidation in acetate-buffered medium as well as in unbuffered medium at pH?=?5.22 were defined by rate law: k _obs ?=?k ₀?+?k _cat [DEP], where k _obs and k ₀ are observed rate constants in the presence and the absence of DEP and k _cat is the rate constant for DEP-catalyzed pathway. At pH?=?8.2, the reaction rate was strongly inhibited by DEP in buffered and unbuffered media. Results suggest that the DEP would have an inhibiting effect in those areas where rainwater pH is 7 or more. These results at high pH are of particular significance to the Indian subcontinent, because of high rainwater pH. Conversely, it indicates the DEP to retard the oxidation of dissolved SO₂ and control rainwater acidification.

     

Postural Stability of Sitting Women

The study examined the utility of stabilometric dimensions and explored whether the changes in sitting postures were manifested in functional measures of postural control. Eleven women participated in the study, which used 11 chair sitting postures: arms on laps or arms right angled; armrest at a height of 17, 20 and 23 cm; with or without backrest; slouch or straight back; legs right angled at knees or crossed legs. The backrest and armrest shifted 16.3% of body weight from a seat pan. The characteristics of stabilometric dimensions evaluated the influence of seat components and sitting behaviour on postural balance. The study attempted to evaluate stability and its application in human-seat interface design.     

Multiresidue analysis of neonicotinoids by solid-phase extraction technique using high-performance liquid chromatography

For routine monitoring of pesticides, a multiresidue analysis through solid-phase extraction technique and using high-performance liquid chromatography (HPLC) in cotton seed cake (CSC) has been developed. Extraction of fortified samples was carried out with aqueous acetone under vacuum. The concentrated extract was loaded onto the solid-phase extraction units, preconditioned with acetonitrile. The extraction units were then washed with hexane and finally eluted with acetonitrile. The pesticide residues were determined using a multiresidue method by reversed-phase HPLC. The average percentage recoveries were found to range between 65.47% and 110% at spiking levels of 10 to 40 mg/kg. The method developed shows a healthy rate of recovery and can successfully be utilized for the extraction and screening of neonicotinoid residues in CSC. The detection limits for imidacloprid, acetamiprid, and thiacloprid using this method were found to be 5, 10, and 20 mg/kg, respectively.     

Mercury pollution in the Sonbhadra district of Uttar Pradesh,India, and its health impacts

The Sonbhadra district in the Singrauli area of Uttar Pradesh, India, has many coal mines and thermal power plants and is a critically polluted area. Many residents of this area reported adverse health conditions which may be linked to metal pollution, especially of mercury investigated here.

In May 2012, samples of water (23), soil (7), blood, hair, and nails from persons showing adverse health conditions selected at random were collected and analyzed for total mercury by atomic absorption spectrometry.

Twenty percent drinking water samples contained mercury from 3 to 26 μg L^?1 (3–26 times the permissible limit). Soil samples had 0.5–10.1 mg kg^?1 Hg.

The average concentrations of mercury in human blood, hair, and nails were found to be 34 μg L^?1, 7.4 mg kg^?1, and 0.8 mg kg^?1, respectively. Mercury concentrations in the blood of these persons were 45 and 28 μg L^?1 on average in the case of men and women. This is much higher than the safe level of 5.8 μg L^?1 set by the United States Environmental Protection Agency (USEPA).

It was concluded that all residents of Sonbhadra sampled could be suffering from mercury toxicity as the area is polluted by Hg released from the coal-fired thermal power plants.     

Rehabilitation of degraded community lands for sustainable development in Himalaya: a case study in Garhwal Himalaya,India

SUMMARY

An approach to the rehabilitation of degraded community lands built on people's perceptions and traditional knowledge was developed, implemented on a small scale (6 ha plot), and evaluated in terms of economic and ecological costs and benefits over a period of 5 years in a mid-altitude (1200 m) village of Garhwal Himalaya. Rehabilitation comprised establishment of water harvesting tanks, organic management of soil, agroforestry (native multipurpose trees t traditional crops), and decision making by the whole village community. Costs and benefits under irrigated and unirrigated conditions were compared. The total cost of establishing the irrigated agroforestry system was 1.23 fold that of the unirrigated one, whereas the total benefit was 2.09 fold. The average standing above-ground biomass of the 4-year-old plantation in the irrigated agroforestry system was 11.69 t/ha compared to 8.34 t/ha in the unirrigated system. Improvement in soil properties was more pronounced in the irrigated system than in the unirrigated one. Nutrient input, an input derived largely from forest biomass, in the unirrigated system was nearly 3 times higher than that in the irrigated system. It is concluded that, considering the local and national/regional/global interests in an integrated manner, agroforestry incorporating water management would be a more effective option for rehabilitating degraded community lands than the afforestation currently being attempted by the government in the mid-altitudes of Indian Himalaya.     

Air quality assessment along Dhanbad - Jharia road

Road ambient air pollution status along Dhanbad – Jharia road isstudied and presented in this article. The selection of this areais made considering the importance of the road in Dhanbad district and the nature of activities taking place along the road, which reflect that the portion of road upto Dhansar can be considered as having commercial areas on both sides and that from Dhansar to Jharia as having industrial areas on both sides.For the assessment of the ambient air quality along the road monitoring is done at the following five locations: Indian Schoolof Mines (ISM), main gate; Bankmore; Dhansar police check post; Dhansar opencast project agent office and a residential house beside the Rajapur opencast project. The location of ISM, maingate is specially chosen as this represents a commercial shoppingcomplexes and the situation can be compared with that at Bankmore. Monitoring of ambient air quality is done following thestandard procedure prescribed in IS: 5182. In addition the concentration of lead, zinc, copper, iron, manganese, cadmium metals in SPM is also monitored. The ambient air quality is monitored in the months of September and November 1999, respectively, to represent monsoon and winter seasons. The SPM concentration observed at all the five locations in the winterseason is more than the permissible limits for commercial andindustrial areas. However, in the monsoon season, the SPM concentration is higher than the permissible limit at the twocommercial locations, i.e., ISM gate and Bankmore, while it isless than the prescribed limit for industrial areas at the remaining three locations. At the ISM gate and Bankmore the SPM generation is mainly by vehicular traffic while at other three locations it was in addition due to mining and other activities.