Assessment of environmental radioactivity for Batman, Turkey

The province of Batman, located in southern Anatolia, has a population of approximately 500,000. To our knowledge, there exists no information regarding the environmental radioactivity in this province. Therefore, gamma activity measurements in soil, building materials and water samples and an indoor radon survey have been carried out in the Batman province. The mean activity concentrations of the natural radionuclides (²²⁶Ra, ²³²Th and ⁴⁰K) and a fission product (¹³⁷Cs) were 35 ± 8, 25 ± 10, 274 ± 167 and 12 ± 7 Bq kg^???1, respectively, in the soil samples. The concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the selected building materials ranged from 18 to 48 Bq kg^???1, 8 to 49 Bq kg^???1 and 68 to 477 Bq kg^???1, respectively. All the calculated radium equivalent (Ra_eq) activity values of the building material samples are lower than the limit of 370 Bq kg^???1, equivalent to a γ-dose of 1.5 mSv year^???1. The activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in tap waters collected from the study area were determined with mean specific activity concentrations of 42 ± 15, 35 ± 9 and 524 ± 190 mBq L^???1, respectively. Indoor radon measurements were made at 95 dwellings in Batman using a CR-39 detector. The radon concentration levels were found to vary from 23 to 145 Bq m^???3. The arithmetic mean of the measured radon concentration levels was found to be 84 Bq m^???3 with a standard deviation value of 23 Bq m^???3. The measurement results obtained in this study did not significantly differ from those taken in other parts of the country. The data generated in this study can be used to determine whether the Batman province is in a normal or high background radiation area and provides a valuable database for future estimations of the impact of radioactive pollution.     

Potential utilization of burned wood in manufacture of medium density fiberboard

The potential utilization of burned wood in the manufacture of medium density fiberboard (MDF) was investigated. For this aim, the MDF panels were made of various mixtures of burned pine wood (Pinus sylvestris L.), unburned beech (Fagus orientalis L.) and oak (Ouercus robur L.) woods under commercial conditions in an MDF company. The mixture ratio of the unburned beech and oak woods to the burned pine wood were 50/50 wt%. The mixing ratios of burned wood chips with unburned wood chips were 0:100, 25:75, 50:50, 75:25 and 100:0, %, respectively. A commercial urea–formaldehyde resin was used as a binder. The physical properties measured in the investigation included density and thickness swelling, while the mechanical properties examined were bending strength, modulus elasticity, internal bond, screw holding ability perpendicular to the plane of panel, and janka hardness perpendicular to the plane of the panel. Surface roughness and color of the panels were also measured. The results indicated that all the panels met the mechanical properties of general-purpose MDF requirements of EN 622-5. The surface roughness of the MDF panels containing burned wood decreased with increasing burned wood content but remained higher than the control panels. The dimensional stability of the MDF panels decreased with the incorporation of burned wood fibers as compared with the control MDF panels.     

Trace Metal Levels in Mussels (Mytilus Galloprovincialis L. 1758) from Turkish Aegean Sea Coast

Bio-monitoring of some heavy metal levels (Cd, Pb, Zn, Cu) in whole edible soft parts of Mytilus galloprovincialis (L. 1758) was conducted in Turkish Aegean Sea coast during the period of September 2002–August 2003 seasonally. Moreover, some physico-chemical environmental parameters, also have been analysed in the same region. The values of some physico-chemical environmental parameters in coastal waters of Turkish Aegean Sea were changed between; 9.0–27.0 ^∘C for temperature, 31.93–40.45 psu for salinity, 7.35–8.48 for pH and 4.05–9.50 mg/l for dissolved oxygen. The levels of trace elements in whole edible soft parts including interstitial fluids of Mediterranean mussels M. galloprovincialis (L. 1758), sampled from 6 different regions of Turkish Aegean Sea coast have ranged between; 0.04–0.52 μg Cd/g wet weight, 0.49–1.72 μg Pb/g w.w., 0.95–1.85 Cu/g w.w., 16.11–37.15 μg Zn/g w.w. The highest values for all trace metals (Cd, Pb, Zn, Cu) were measured in inner part of Izmir Bay (station 3) and lowest in Sigacik and Gulluk Bay (station 5, 6). Generally heavy metal levels are lower than the results in soft mussel tissues reported from Mediterranean regions.     

Electrocoagulation process for the treatment of metal-plating wastewater: Kinetic modeling and energy consumption

The wastewater from industrial area was treated by EC via Fe and Al electrodes. Cu, Ni, Cr and Zn were highly removed at the first minutes, simultaneously. Pseudo-2nd-order was found to be more suitable for kinetics. Adsorption capacities based on kinetic modeling were observed as Cr>Cu>Ni>Zn. The chemical cost in the case of pH adjustment after EC was less as 3.83 $/m³. It is known that wastewater produced by the metal-plating industry contains several heavy metals, which are acidic in nature and therefore toxic for the environment and for living creatures. In particular, heavy metals enter the food chain and accumulate in vital organs and cause serious illness. The precipitation of these metals is mostly achieved by pH adjustment, but as an alternative to this method, the electrocoagulation process has investigated in this study using iron and aluminum electrodes. The effects of the pH adjustment on removal before and after the electrocoagulation process were investigated, and cost analyses were also compared. It was observed that a high proportion of removal was obtained during the first minutes of the electrocoagulation process; thus, the current density did not have a great effect. In addition, the pH adjustment after the electrocoagulation process using iron electrodes, which are 10% more effective than aluminum electrodes, was found to be much more efficient than before the electrocoagulation process. In the process where kinetic modeling was applied, it was observed that the heavy metal removal mechanism was not solely due to the collapse of heavy metals at high pH values, and with this modeling, it was seen that this mechanism involved adsorption by iron and aluminum hydroxides formed during the electrocoagulation process. When comparing the ability of heavy metals to be adsorbed, the sequence was observed to be Cr>Cu>Ni>Zn, respectively.     

Polychlorinated biphenyls and organochlorine pesticides in amniotic fluids of pregnant women in south-central Turkey†

The concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) were determined in amniotic fluid of 200 pregnant women from the Cukurova region of Turkey. The concentrations of OCPs [hexachlorocyclohexane (HCH), hexachlorobenzene (HCB), dichlorodiphenyl trichloroethane (p,p′-DDT), and various metabolites], and different PCB congeners (28, 52, 101, 118, 138, 153, 180) were determined by gas chromatography with electron capture detection as follows: HCB 6.6 ± 4.7, ΣHCH 21.6 ± 14.2, ΣDDT 12.5 ± 7.5, and ΣPCBs 74.0 ± 54 ng mL^?1. Correlations of maternal or gestational age and levels of OCPs and PCBs were not significant. The levels of these organochlorine compounds (OCs) were below detection limit for 5% of the samples, 80% contained more than one OC. This study illustrates that prenatal exposure of a fetus to OCs is prevalent in the Cukurova region.     

Land degradation assessment by geo-spatially modeling different soil erodibility equations in a semi-arid catchment

Land degradation by soil erosion is one of the most serious problems and environmental issues in many ecosystems of arid and semi-arid regions. Especially, the disturbed areas have greater soil detachability and transportability capacity. Evaluation of land degradation in terms of soil erodibility, by using geostatistical modeling, is vital to protect and reclaim susceptible areas. Soil erodibility, described as the ability of soils to resist erosion, can be measured either directly under natural or simulated rainfall conditions, or indirectly estimated by empirical regression models. This study compares three empirical equations used to determine the soil erodibility factor of revised universal soil loss equation prediction technology based on their geospatial performances in the semi-arid catchment of the Saraykoy II Irrigation Dam located in Cankiri, Turkey. A total of 311 geo-referenced soil samples were collected with irregular intervals from the top soil layer (0-10?cm). Geostatistical analysis was performed with the point values of each equation to determine its spatial pattern. Results showed that equations that used soil organic matter in combination with the soil particle size better agreed with the variations in land use and topography of the catchment than the one using only the particle size distribution. It is recommended that the equations which dynamically integrate soil intrinsic properties with land use, topography, and its influences on the local microclimates, could be successfully used to geospatially determine sites highly susceptible to water erosion, and therefore, to select the agricultural and bio-engineering control measures needed.     

Mycotoxin levels and incidence of mould in Turkish rice

One hundred unpackaged rice samples, each weighing 500 g, were randomly collected at retail stores and open markets in the largest rice growing area (Thrace) in Turkey and analysed for mould counts, predominant mould genera, moisture content and mycotoxin levels. Mould counts ranged from 1.0 × 10¹ to 1.5 × 10⁴ cfu/g in 70 of 100 samples, and the correlation between moisture content and mould count was significant (p????0.05). Aspergillus spp. and Penicillium spp., potential mycotoxin producers, were the dominant moulds. In one area from which samples were collected, the mycotoxin content of rice was found to be positively correlated with moisture content; samples with higher moisture also contained higher numbers of moulds. The levels of total aflatoxins, aflatoxin B1 and ochratoxin A were higher than the maximum tolerable limits (4, 2 and 3 ??g/kg, according to the EC Regulation and the Turkish Food Codex) for 32, 14 and 30 of 100 rice samples, respectively. This is the first comprehensive report of ochratoxin A levels in rice grown in Thrace, Turkey.     

Environmental Kuznets Curve and Trade Openness in Turkey: Bootstrap ARDL Approach with a Structural Break

Environmental Science and Pollution Research - In this study, the validity of the environmental Kuznets curve (EKC) hypothesis is examined with the newly developed bootstrap autoregressive...     

Spatio-temporal variations of organic carbon and chlorophyll degradation products in the surficial sediments of Izmir Bay (Aegean Sea/Turkey)

The aim of this research is to determine the effects of Izmir Big Channel Waste Water Treatment Project on the sediment quality of Izmir Bay. Wastewater treatment improves the water quality. However, sediment does not respond to this treatment as fast as water column. Monitoring of bottom water and sediment quality is necessary for identification of the recovery of the whole ecosystem. For this purpose, bottom water and sediment samples were collected from three stations which are located in the middle and inner parts of the Izmir Bay on a monthly basis between January 2003 and December 2003. Values measured at stations ranged between; 0.54-12.82 microg/L for chlorophyll-a, 0.09-9.32 microg/L for phaeopigment, 0.05-1.91 mg/L for particulate organic carbon in bottom waters, 11.88-100.29 microg/g for chlorophyll degradation products and 1.12-5.39% for organic carbon in sediment samples. In conclusion, it was found that grazing activity explained carbon variations in sediment at station 2, but at station 1 and station 3 carbon variations in sediment were not related to autochthonous biological processes.     

Complete desalination of seawater using a novel polyvinylidene fluoride/zeolite membrane

Water scarcity arises rapidly with increasing human population, urbanization and industrialization. Therefore, water production from natural sources using efficient and environmental friendly technologies is gaining attention. Pervaporative desalination is a promising technology based upon membrane filtration. Here, we fabricated and tested a novel hybrid-composite membrane: polyvinylidene fluoride (PVDF)/polyvinyl pyrrolidone/(PVP)/3A zeolite. Desalination performance was evaluated in terms of flux, salt rejection, zeolite incorporation within the membrane and temperature. Results show that all membranes exhibited salt rejection higher than 99.5%. The highest flux of 2.5 kg m^?2 h^?1 and salt rejection of 99.9% were obtained using 10 wt% 3A incorporated PVDF/PVP membrane at 40 °C. The PVDF/PVP/3A zeolite membrane preserved its stability during 55-h desalination operating without performance decline.