Norovirus GII.Pe Genotype: Tracking a Foodborne Outbreak on a Cruise Ship Through Molecular Epidemiology,Brazil, 2014

Norovirus (NoV) is recognized as the most common cause of foodborne outbreaks. In 2014, an outbreak of acute gastroenteritis occurred on a cruise ship in Brazil, and NoV became the suspected etiology. Here we present the molecular identification of the NoV strains and the use of sequence analysis to determine modes of virus transmission. Food (cream cheese, tuna salad, grilled fish, orange mousse, and vegetables soup) and clinical samples were analyzed by ELISA, conventional RT-PCR, qRT-PCR, and sequencing. Genogroup GII NoV was identified by ELISA and conventional RT-PCR in fecal samples from 5 of 12 patients tested (41.7%), and in the orange mousse food sample by conventional RT-PCR and qRT-PCR. Two fecal GII NoV samples and the orange mousse GII NoV sample were successfully genotyped as GII.Pe (ORF 1), revealed 98.0–98.8% identities among them, and shared phylogenetically distinct cluster. Establishing the source of a NoV outbreak can be a challenging task. In this report, the molecular analysis of the partial RdRp NoV gene provided a powerful tool for genotyping (GII.Pe) and tracking of outbreak-related samples. In addition, the same fast and simple extraction methods applied to clinical samples could be successfully used for complex food matrices, and have the potential to be introduced in routine laboratories for screening foods for presence of NoV.     

Preparation and Characterization of Clay Nanocomposites of Plasticized Starch and Polypropylene Polymer Blends

Plasticized starch (PLS) is a renewable, degradable, and inexpensive polymer, but it suffers from poor mechanical properties. The mechanical properties can be improved by blending PLS with polyolefins, nonetheless, at high PLS content, the mechanical properties remain poor. Here we show that addition of clay can greatly improve the mechanical properties of PLS/polypropylene blends at high starch content. Unmodified and organically modified montmorillonite clays, MMT and Cloisite 30B respectively, were added to blends of glycerol-plasticized starch and polypropylene, compatibilized using maleated polypropylene. TEM indicates that MMT is well dispersed in the PLS phase of the blends, while Cloisite 30B is located both within the PLS phase as well as at the interface between PLS and PP. At high PLS content, the addition of clay increased the tensile strength and tensile modulus by an order of magnitude, while reducing the ultimate elongation only slightly. Such improvements are attributable to both the addition of clay as a reinforcing component, as well as to the change in the two phase morphology due to addition of clay.     

Enhancing submerged coastal constructions by incorporating multifunctional purposes

Surfing has becoming more and more attractive in the past few decades, constituting nowadays an important source of revenue for many countries with extensive coastlines. For this purpose and also for environmental reasons, the conventional ways of protecting a coastline appear to entail some disadvantages. An innovative and interesting way of improving surfing capacities and contributing to protect a local coastal zone is by means of multifunctional artificial reefs. A multifunctional artificial reef (MFAR) is a submerged structure that serves several purposes; in particular, it may enhance the surfing possibilities and the environmental value of the local area. This structure has some promising new aspects, too: first, it provides an unimpaired visual amenity; second, it offers tourist and economic benefits by improving the surfing conditions; third, it can enhance the environmental value of the area where it is built, and fourth, if designed properly, the down drift erosion can be minimal. An appropriate reef design in terms of ‘surfability’, i.e. the possibility to surf a wave, for the Leirosa beach, located to the south of Figueira da Foz, midway along Portugal’s West Atlantic coast, has been investigated. In order to achieve the best design several steps were conducted. First, the performance of the Boussinesq-type COULWAVE model is tested with experimental data. Next, this numerical model is used to define the best values for three design parameters: reef angle; geometry of the reef (without or with a platform), and horizontal dimensions for the appropriate geometry. A preliminary design was achieved step by step, making use of the theory and of the state of the art of multifunctional reefs. This reef geometry is used in the numerical study. In terms of ‘surfability’ and for the conditions of the local coastline of Leirosa, the following values were found for the main parameters: a reef angle of 66°; a structure height of 3.20 m; a reef geometry composed of a delta without a platform; a reef submergence of 1.50 m, and a structure seaward slope of 1:10.     

Artisanal fisheries of the Itaparica reservoir,São Francisco River,Brazil: socioeconomic profile,environmental dynamics,and management recommendations

Currently, artisanal fisheries in fresh water reservoirs have been losing ground to commercial fish farming and a great deal of fishery resources are being threatened by human interventions, such as reservoir management and increasing net-cage aquaculture. This study aims to understand the impacts of environmental changes on fishery resources and analyse the migratory fish breeding season as a missing link for fishery management in the semi-arid area of the São Francisco River Basin. Among the 870 fishermen operating in the Pernambuco part of the Itaparica Reservoir, 10% were interviewed and affirmed that fish stocks have been compromised due to the closed fishing period’s incoherence, exotic species insertion, and changes to the river flow caused by reservoir construction and operation. A significant correlation was observed between the Reproductive Activity Index (RAI) and precipitation (p?=?0.745) as well as between the RAI and the river’s flow (p?=??0.909). This shows how important it is to consider both the semi-arid climate setting and reservoir operation in determining the closed period which should safeguard fish reproduction. Monitoring the fish reproduction period and research on the reproductive biology of native fish species is needed in the São Francisco River Basin’s different stretches in order to guarantee valuable fish stocks and fisheries maintenance. Integrated action between the fish resource users, civil society, and federal bodies/agencies is essential in order to mitigate impacts and improve fish production systems, not only in Brazil, but in other regions experiencing a similar scenario.     

Determination of pesticides of different chemical classes in drinking water of the state of Santa Catarina (Brazil) using solid-phase microextraction coupled to chromatographic determinations

The evaluation of the concentration of pesticides in drinking water presents a real concern. In this study, a simple and rapid method based on solid-phase microextraction (SPME) followed by gas chromatography–mass spectrometry and electron capture detectors was developed aiming at multiclass determination of 23 pesticides regulated by the Brazilian legislation. The extraction was carried out by direct immersion mode (DI-SPME) using DVB/Car/PDMS fiber coating. In order to improve the extraction efficiency, parameters such as temperature, salting-out effect, and extraction time were optimized. The method was evaluated using drinking water samples spiked with the analytes at different concentrations, and it showed good linearity in the range studied. The values obtained for limits of quantification (LOQ) were below the limits established by Brazilian regulations. Accuracy and precision of the method exhibited satisfactory results, providing relative recoveries from 70 to 123.34% at three spiked levels, and the relative standard deviations ranged from 0.53 to 24.8%. The method was applied in 20 drinking water samples from 13 cities in the State of Santa Catarina, Brazil.

     

Levels and risks of particulate-bound PAHs in indoor air influenced by tobacco smoke: a field measurement

Considering tobacco smoke as one of the most health-relevant indoor sources, the aim of this work was to further understand its negative impacts on human health. The specific objectives of this work were to evaluate the levels of particulate-bound PAHs in smoking and non-smoking homes and to assess the risks associated with inhalation exposure to these compounds. The developed work concerned the application of the toxicity equivalency factors approach (including the estimation of the lifetime lung cancer risks, WHO) and the methodology established by USEPA (considering three different age categories) to 18 PAHs detected in inhalable (PM₁₀) and fine (PM_2.5) particles at two homes. The total concentrations of 18 PAHs (Σ_PAHs) was 17.1 and 16.6 ng m^?3 in PM₁₀ and PM_2.5 at smoking home and 7.60 and 7.16 ng m^?3 in PM₁₀ and PM_2.5 at non-smoking one. Compounds with five and six rings composed the majority of the particulate PAHs content (i.e., 73 and 78 % of Σ_PAHs at the smoking and non-smoking home, respectively). Target carcinogenic risks exceeded USEPA health-based guideline at smoking home for 2 different age categories. Estimated values of lifetime lung cancer risks largely exceeded (68–200 times) the health-based guideline levels at both homes thus demonstrating that long-term exposure to PAHs at the respective levels would eventually cause risk of developing cancer. The high determined values of cancer risks in the absence of smoking were probably caused by contribution of PAHs from outdoor sources.     

A knowledge network to promote the use and valorization of wild food plants in the Pantanal and Cerrado,Brazil

Regional Environmental Change - The conservation and use of wild food plants should include local people in the decision-making process, and many countries have done so. However, interacting with...     

The ability of biological and organic synthetic materials to accumulate atmospheric particulates containing copper, lead, nickel and strontium

This work was aimed at finding materials that could be used as alternatives to lichens as air quality monitors since the high natural variability and the large amount of lichen collected are two drawbacks of the use of these organisms. Lichen Flavoparmelia caperata(L.) Hale was exposed in three different forms (transplant, detached from the substratum and as a biomass-ground and homogeneized) and compared to the planetree bark (Platanus hybrida Brot.), exposed as a biomass, and two organic synthetic materials (Chelex(R) 100 resin and cellulose acetate). Materials were exposed for two months in the winter, spring and summer, at three Portuguese coastal cities. The results showed that the airborne accumulations of Cu, Ni, Pb and Sr were partially dependent on the meteorological conditions but mainly dependent on the nature of the exposed material. The standard deviations of the synthetic materials or homogenized biomass were the same or greater than lichen transplants or detached. The accumulation by biological materials, of the four studied elements, was comparable to the lichen transplant accumulation. The replacement of the traditional transplants by the biomass was not considered advantageous, since their preparation is time-consuming. Therefore lichens remain the most suitable in biomonitoring studies. The exposure of detached lichen allows the accurate measurement of the exposed area/volume so it can be useful to relate atmospheric deposition rates with the lichen metal content. The synthetic materials accumulated Cu and Ni and should only be used as an alternative to traditional transplants when these are the elements of interest.