Preparation and characterization of green bricks using pharmaceutical industrial wastes

This paper reports on recycling of industrial wastes (three pharmaceutical industrial sludges) into environmental friendly value-added materials. Stabilization/Solidification (S/S or bricks) process was applied to make a safer way for the utilization of pharmaceutical waste. The additives in this study include binders (cement, lime and bentonite) and strengthening material (pulverized fuel ash (PFA), silica fume and quarry dust) was used at different compositions. Bricks were cured for 28 days, and the following analysis-like compressive strength, leachability of heavy metals, mineralogical phase identity by X-ray diffraction (XRD) spectroscopy, Fourier transform infrared spectroscopy (FTIR) and thermal behaviour by thermogravimetric-differential thermal analysis (TG-DTA) had done. All the bricks were observed to achieve the standard compressive strength as required for construction according to BIS standards. Metal concentration in the leachate has reached the dischargeable limits according to Brazilian standards. Results of this study demonstrate that production of bricks is a promising and achievable productive use of pharmaceutical sludge.     

The ecological dynamics of low external input agriculture: A case study of hill farming in a developing country

This paper on Low External Input Agriculture (LEIA) has explored how indigenous hill farming systems in a developing country setting of rural Nepal are functioning and which ecological properties of such systems could contribute to the development of Low External Input and Sustainable Agriculture (LEISA). Three cases were studied using direct field observation, group discussion and interviews, and the important practices of LEIA were ranked into eight classes to analyse the ecological sustainability of the hill farming systems. The study shows that the hill farming system is complex, diverse, heavily reliant on local resources and focuses on the renewability of production resources within the farm. All this can greatly contribute to make the system ecologically sustainable. However, demands for increased production put considerable pressure on farmers to apply external inputs which, if in excess, may jeopardise the whole system. A prerequisite for guidance in careful soil management is the strengthening of supportive research aimed at teaching farmers how to use external inputs. This must agree with the principles of sustainable agriculture and take into account the site-specific variations which are characteristic of Nepalese hill farming systems. We defined the term Ecological Dynamics as 'the pattern of changes in structure and/or forces in processes which govern the development of natural and artificial ecosystems'. This definition assists in identification of trends in ecological sustainability. Understanding indigenous farming systems reveals important ecological clues essential for the development of sustainable agriculture.     

Effects of Hg and Cu on hemocytes-mediated functions in the prawn,Macrobrachium malcolmsonii

Sublethal effects of Hg (9.6, 14.5 and 24.1 microg/l) and Cu (60.5, 90.8 and 150.5 microg/l) on the hemocytes-mediated functions in the juveniles of the economically important freshwater prawns, Macrobrachium malcolmsonii were investigated. The population of total hemocytes, percentile phagocytosis and superoxide anion production were found to be increased in test prawns exposed to the lowest sublethal concentration of these two metals in comparison to controls. This indicates the fact that a mechanism of host-defence was in an active state to encounter metal toxicity. The total hemocytes population, percentile phagocytosis and superoxide anion production were found to be decreased in test prawns exposed to intermediate as well as the highest sublethal concentrations of Hg and Cu when compared with controls. This suggests that high concentrations of both Hg and Cu have inhibitory effects on the immune functions of the hemocytes in the prawn, M. malcolmsonii.     

Effect of operational parameters on heavy metal removal by electrocoagulation

In the present paper, the performance of electrocoagulation (EC) for the treatability of mixed metals (chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), and zinc (Zn)) from metal plating industrial wastewater (EPW) has been investigated. The study mainly focused on the affecting parameters of EC process, such as electrode material, initial pH, distance between electrodes, electrode size, and applied voltage. The pH 8 is observed to be the best for metal removal. Fe–Fe electrode pair with 1-cm inter-electrode distance and electrode surface area of 40 cm² at an applied voltage of 8 V is observed to more efficient in the metal removal. Experiments have shown that the maximum removal percentage of the metals like Cr, Ni, Zn, Cu, and Pb are reported to be 96.2, 96.4, 99.9, 98, and 99.5 %, respectively, at a reaction time of 30 min. Under optimum conditions, the energy consumption is observed to be 51.40 kWh/m³. The method is observed to be very effective in the removal of metals from electroplating effluent.     

Private micro-hydro power and associated investments in Nepal: the Barpak village case and broader issues

This article examines a number of issues connected with the development of small-scale hydroelectric power and related investments in Nepal. The micro-hydro investment scheme in Barpak village serves as a case study, and the article also presents a number of related issues discussed against the background of the evolution of micro-hydro power in Nepal. The article outlines the success of micro-hydro development, modest in relation to its enormous potential, the realization of which depends on whether a number of challenges and constraints can be overcome. The article closes with suggestions on implementing sustainable micro-hydro development in rural areas, based on the Barpak experience and the authors' other recent studies of rural energy issues in Nepal.