Idle emissions from heavy-duty diesel and natural gas vehicles at high altitude

Idle emissions of total hydrocarbon (THC), CO, NOx, and particulate matter (PM) were measured from 24 heavy-duty diesel-fueled (12 trucks and 12 buses) and 4 heavy-duty compressed natural gas (CNG)-fueled vehicles. The volatile organic fraction (VOF) of PM and aldehyde emissions were also measured for many of the diesel vehicles. Experiments were conducted at 1609 m above sea level using a full exhaust flow dilution tunnel method identical to that used for heavy-duty engine Federal Test Procedure (FTP) testing. Diesel trucks averaged 0.170 g/min THC, 1.183 g/min CO, 1.416 g/min NOx, and 0.030 g/min PM. Diesel buses averaged 0.137 g/min THC, 1.326 g/min CO, 2.015 g/min NOx, and 0.048 g/min PM. Results are compared to idle emission factors from the MOBILE5 and PART5 inventory models. The models significantly (45-75%) overestimate emissions of THC and CO in comparison with results measured from the fleet of vehicles examined in this study. Measured NOx emissions were significantly higher (30-100%) than model predictions. For the pre-1999 (pre-consent decree) truck engines examined in this study, idle NOx emissions increased with model year with a linear fit (r2 = 0.6). PART5 nationwide fleet average emissions are within 1 order of magnitude of emissions for the group of vehicles tested in this study. Aldehyde emissions for bus idling averaged 6 mg/min. The VOF averaged 19% of total PM for buses and 49% for trucks. CNG vehicle idle emissions averaged 1.435 g/min for THC, 1.119 g/min for CO, 0.267 g/min for NOx, and 0.003 g/min for PM. The g/min PM emissions are only a small fraction of g/min PM emissions during vehicle driving. However, idle emissions of NOx, CO, and THC are significant in comparison with driving emissions.     

Biosolids-amended soils: Part I. Effect of biosolids application on soil quality and ecotoxicity.

Investigations of potential risk from biosolids generally indicate that land application does not threaten human or ecosystem health, but questions continue to arise concerning the environmental effects of this practice. This research project was initiated to evaluate ecotoxicity resulting from the amendment of soils with biosolids from municipal wastewater treatment plants. Toxicity was evaluated using standard tests, including earthworm mortality, growth, and reproduction; seedling germination and root elongation; microbial respiration; and nematode mortality and reproduction. Nineteen municipal wastewater treatment plants were identified to participate in an initial screening of toxicity, and five were chosen for a more detailed evaluation. In addition, two soils with historically high applications of high-metal biosolids were evaluated. Contaminants examined were zinc, copper, nickel, chromium, arsenic, cadmium, lead, and coplanar polychlorinated biphenyls (PCBs). Single applications had no effect on soil metal concentrations. Coplanar PCBs were not detectable in any of the soils or biosolids. All target organisms were sensitive to reference toxicants. Limited toxicity was observed in a small number of the amended soils, but no patterns emerged. Approximately one-half of the negative effects of biosolids on bioindicators could be attributed to routine properties, such as slight depression of pH and/or elevated salinity. None of the accumulated metal concentrations were excessive, and most would not be considered elevated. These observations suggest that current regulations for application of biosolids to soils are providing adequate ecosystem protection.     

Effects of wastewater disinfection on waterborne bacteria and viruses.

Wastewater disinfection is practiced with the goal of reducing risks of human exposure to pathogenic microorganisms. In most circumstances, the efficacy of a wastewater disinfection process is regulated and monitored based on measurements of the responses of indicator bacteria. However, inactivation of indicator bacteria does not guarantee an acceptable degree of inactivation among other waterborne microorganisms (e.g., microbial pathogens). Undisinfected effluent samples from several municipal wastewater treatment facilities were collected for analysis. Facilities were selected to provide a broad spectrum of effluent quality, particularly as related to nitrogenous compounds. Samples were subjected to bench-scale chlorination and dechlorination and UV irradiation under conditions that allowed compliance with relevant discharge regulations and such that disinfectant exposures could be accurately quantified. Disinfected samples were subjected to a battery of assays to assess the immediate and long-term effects of wastewater disinfection on waterborne bacteria and viruses. In general, (viable) bacterial populations showed an immediate decline as a result of disinfectant exposure; however, incubation of disinfected samples under conditions that were designed to mimic the conditions in a receiving stream resulted in substantial recovery of the total bacterial community. The bacterial groups that are commonly used as indicators do not provide an accurate representation of the response of the bacterial community to disinfectant exposure and subsequent recovery in the environment. UV irradiation and chlorination/dechlorination both accomplished measurable inactivation of indigenous phage; however, the extent of inactivation was fairly modest under the conditions of disinfection used in this study. UV irradiation was consistently more effective as a virucide than chlorination/dechlorination under the conditions of application, based on measurements of virus (phage) diversity and concentration. Taken together, and when considered in conjunction with previously published research, the results of these experiments illustrate several important limitations of common disinfection processes as applied in the treatment of municipal wastewaters. In general, it is not clear that conventional disinfection processes, as commonly implemented, are effective for control of the risks of disease transmission, particularly those associated with viral pathogens. Microbial quality in receiving streams may not be substantially improved by the application of these disinfection processes; under some circumstances, an argument can be made that disinfection may actually yield a decrease in effluent and receiving water quality. Decisions regarding the need for effluent disinfection must account for site-specific characteristics, but it is not clear that disinfection of municipal wastewater effluents is necessary or beneficial for all facilities. When direct human contact or ingestion of municipal wastewater effluents is likely, disinfection may be necessary. Under these circumstances, UV irradiation appears to be superior to chlorination in terms of microbial quality and chemistry and toxicology. This advantage is particularly evident in effluents that contain appreciable quantities of ammonia-nitrogen or organic nitrogen.     

Idle Emissions from Heavy-Duty Diesel and Natural Gas Vehicles at High Altitude

ABSTRACT

Idle emissions of total hydrocarbon (THC), CO, NO_x, and particulate matter (PM) were measured from 24 heavy-duty diesel-fueled (12 trucks and 12 buses) and 4 heavy-duty compressed natural gas (CNG)-fueled vehicles. The volatile organic fraction (VOF) of PM and aldehyde emissions were also measured for many of the diesel vehicles. Experiments were conducted at 1609 m above sea level using a full exhaust flow dilution tunnel method identical to that used for heavy-duty engine Federal Test Procedure (FTP) testing. Diesel trucks averaged 0.170 g/min THC, 1.183 g/min CO, 1.416 g/min NO_x, and 0.030 g/min PM. Diesel buses averaged 0.137 g/min THC, 1.326 g/min CO, 2.015 g/min NO_x, and 0.048 g/min PM.

Results are compared to idle emission factors from the MOBILE5 and PART5 inventory models. The models significantly (45-75%) overestimate emissions of THC and CO in comparison with results measured from the fleet of vehicles examined in this study. Measured NO_x emissions were significantly higher (30-100%) than model predictions. For the pre-1999 (pre-consent decree) truck engines examined in this study, idle NO_x emissions increased with Health and Environment; June 30, 1999 (available from the authors).     

Development of an in vitro method to estimate lung bioaccessibility of metals from atmospheric particles

The research presented here was initiated to improve the current knowledge on easily released metals from atmospheric particles. The objectives of this paper were to develop an in vitro method to estimate lung bioaccessibility and to provide quantitative data on metals bioaccessibility. A large set of metals has been investigated (Ba, Cd, Ce, Co, Cu, La, Mn, Mo, Ni, Pb, Rb, Sb and Zn) using two distinct fluids (water and Gamble solution) on four reference materials representing different types of particle sources. Through this study, different parameters such as extraction-time, composition of the leaching solution and solid-to-liquid (S/L) ratios were investigated. The findings obtained for four SRMs suggest that the bioaccessibility is maximized after a 24 h extraction for a range of S/L ratios varying from 1/500 to 1/50,000. We clearly demonstrate that the higher bioaccessibility of metals is obtained with the Gamble solution. Moreover, our results imply that bioaccessibility is speciation and element dependent with percentages varying from 3.3% for Pb to 92.5% for Zn. An estimation of uncertainties of 11% to 30% was obtained for metals bioaccessibility in the four reference materials. In addition, the extraction procedure was validated by performing a mass balance on both soluble and insoluble fractions. This developed method may be used to evaluate the pulmonary bioaccessibility of trace elements present in the atmospheric particles without major artefacts.     

Chemical characterization of synthetic soil from composting coal combustion and pharmaceutical by-products

Land application of coal combustion by-products (CCBs) mixed with solid organic wastes (SOWs), such as municipal sewage sludge, has become increasingly popular as a means of productively using what were once considered waste products. Although bulk chemical and physical properties of several of these CCB-SOW materials have been reported, detailed information about their synthesis and mineralogy of the CCB-SOW materials has not been reported. In this paper, chemical and mineralogical properties of a soil-like material obtained from composting a mixture of CCBs with a pharmaceutical fermentation by-product (FB) were investigated at the laboratory and field scale. All starting materials and products were characterized by X-ray diffraction (XRD), fourier transform infrared (FFIR) spectroscopy, and elemental analyses. The results showed that the FB was strongly bound to the CCBs and could not be removed by washing. Within 2 wk of the start of a composting study, there was a rapid drop in pH from 12 to 8, an increase in temperature to 70 degrees C, and a reduction in the dissolved oxygen content, attributed to the rapid establishment of a highly active microbial population. Composting produced a soil-like material with high levels of plant nutrients, a high nutrient retention capacity, and metal contents similar to median levels of those metals reported for soils. The levels of boron and soluble salts are such that sensitive plants may initially show toxicity symptoms. However, with adequate rainfall, leaching should rapidly remove most of the B and soluble salts. With care, the material produced is safe for use as a synthetic topsoil.