Analysis of the Henze precipitate from the blood cells of the ascidian<Emphasis Type="Italic"> Phallusia mammillata</Emphasis>

The Henze precipitate, a peculiar blue-green microparticulate obtained by lysis of the blood cells of the ascidian Phallusia mammillata (Protochordata), was investigated with atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray microanalysis. The precipitate was collected from the Henze solution, an unstable red-brown product obtained by treating blood with distilled water, whose degradation yields a characteristic blue-green product. The microparticulates measured 50–100 µm in diameter and appeared irregular in shape. SEM examination showed smooth, roughly round boundaries. The microparticulate surface examined with AFM appeared as an irregular matrix formed by 70–320-nm-wide mammillate composites, including and embedding small (500–800 nm wide) crystal-like multilayered formations. X- ray analysis showed that the elements present in these same precipitates were mainly C, Si, Al and O. The microparticulate composition appeared close to those of natural waxes or lacquers, embedding amorphous silicates and/or other Si–Al components. The unusual occurrence of Si in ascidian blood and its role are discussed.     

Oxidation of trichloroethene over metal oxide catalysts: kinetic studies and correlation with adsorption properties

The performance of bulk chromium oxide is compared with that of a Mn commercial catalyst for the deep oxidation of trichloroethene (1000-2500ppmv, 55h(-1) space velocity) in air, in dry and wet (20000ppm of H(2)O) conditions, in terms of activity, selectivity and stability. Chromium oxide was found to be more active (on a catalyst weight basis), however its activity decreases continuously with time on stream. The presence of water increases its stability, the Mn catalyst showing the opposite behaviour. The effect of water on the Cr catalyst can be explained according to the Deacon equilibrium, as the presence of water tends to decrease the Cl(2) concentration, assumed to be responsible of the catalyst deactivation. Regarding to the selectivity, the Mn catalyst yields C(2)Cl(4), CCl(4) and CHCl(3) as organochlorinated by-products, whereas chromium oxide produces only trace amounts of CCl(4). Simple power-law kinetics expressions (first-order for Mn and zero-order for Cr) provide fairly good fits for the evolution of the conversion with the temperature. Furthermore, the kinetic behaviour of chromium oxide can be represented with a Langmuir-Hinshelwood model taking into account the chlorine inhibitory effect.     

Enhancement of the CO(2) retention capacity of X zeolites by Na- and Cs-treatments

Adsorption of carbon dioxide on alkaline modified X zeolites was investigated by temperature programmed desorption (TPD) analysis of these materials previously saturated with CO(2) at 50, 100 and 200 degrees C. Parent X zeolite (in its sodium form) was treated with different sodium and cesium aqueous solutions, using both carbonates and hydroxides as precursors. The resulting materials were characterised by nitrogen physisorption, XRD, and NH(3)-TPD, in order to determine their morphological, crystallographic and chemical properties. Slight desilication phenomena were observed using hydroxides as precursors, whereas the treatment with Cs salts lead to higher crystallinity losses. Several successive adsorption-desorption cycles were carried out in order to check the regenerability of the adsorbents. Cesium-treated zeolites present higher carbon dioxide retention capacities than the sodium treated and than the parent material. When working with these Cs-modified materials, the desorption takes place mainly at temperatures between 250 and 400 degrees C, results of great practical interest, since it allows the use these kinds of materials for adsorption-desorption cycles. The evolution of the retention capacity with temperature is also markedly more positive for Cs-treated zeolite, especially when carbonate is used as the precursor. These materials maintain high retention capacities at 100 degrees C (10mg g(-1)) and even at 200 degrees C (3mg g(-1)), temperatures at which the most of the adsorbents are inactive.     

Cellular damage of plant pathogenic fungi by antifungal compounds produced by Bacillus spp. isolates

The use of microorganisms as biological control agents (BCAs) has become an effective alternative to chemical means of controlling plant pathogens. The antagonistic and inhibitory activity of 71 Bacillus spp. strains, which were isolated from different Mexican sites, were tested against several phytopathogen fungi, Fusarium oxysporum, Fusarium equiseti, Fusarium avenaceum, Bipolaris spp. and Alternaria spp. From the antagonism study, the strain ELI149 showed a marked inhibition of growth against all tested fungi; therefore crude metabolites from this strain were extracted using ethyl acetate and amberlite resin and probed against the same fungi as well as strains of Mucor sp., Penicillium spp. and Paecilomyces spp. The results indicated that amberlite was more suitable for extraction of secondary metabolites with antifungal activity. Finally, observation of cell damage in the tested pathogenic fungi showed marked morphological changes on reproductive structures in all tested fungi indicating that antibiosis was the mechanism of the antagonistic effect. These results suggest that metabolites from the Bacillus strains have a wide spectrum of antibiotic activities, which can be used as biocontrol agents for controlling fungal plant diseases of agricultural importance.     

Micro- and mesoplastics in sea surface water from a Northern Adriatic coastal area

Environmental Science and Pollution Research - The presence of microplastics in the sea is a global issue widely studied and discussed in the last years. The whole marine ecosystem is now...     

Oxidation of methane over palladium catalysts: effect of the support

This work is focused on the deep catalytic oxidation of methane over supported palladium catalysts. The influences of the metal loading, oxidation state of palladium, nature of supports, presence of promoters in the supports (for zirconia-based supports), and thermal stability have been studied experimentally. Catalysts were prepared by incipient wetness of commercially available supports with aqueous solutions of palladium nitrate. For gamma-alumina support, it was observed that the optimal amount of palladium is between 0.5% and 2%, with higher amounts leading to a loss in specific activity. Concerning the oxidation state of the catalyst, it is concluded that for all the supports tested in the present work, a reduction of the catalyst is not needed, yielding the same conversion at steady state catalysts reduced and oxidised. The thermal stability of various supported catalysts were also studied, zirconia supports being the most active. These supports, specially Y-modified zirconia support, do not suffer appreciable deactivation below 500 degrees C.     

Determination of toxic metals in leather by wavelength dispersive X-ray fluorescence (WDXRF) and inductively coupled plasma optical emission spectrometry (ICP OES) with emphasis on chromium

The tanning industry is one of the largest environmental polluters due to high generation waste in all production processes, but the tanning is particularly worrisome due to the use of significant amounts of chromium. Cr is an element potentially toxic to both health and the environment, depending on the concentration and the oxidation state. Cr(VI) can come in contact with human skin when using leather goods, which can cause allergies and dermatitis, besides being carcinogenic. Considering that approximately 90% of the world production of leather is performed with Cr salts, the determination of this element in leather is necessary to avoid exposure to the risks that the element can provide. The main goal of this study was the development of an alternative analytical method for the determination of Cr in leathers (ovine and bovine leather tanned with Cr and vegetable tannin) using wavelength dispersive X-ray fluorescence (WDXRF) for direct solid analysis. Besides performing analysis of the chemical composition and determination of Al, As, Ba, Ca, Cd, Cr, Cu, Fe, Mg, Ni, Pb, Sb, Sr, Ti, and Zn in leather by inductively coupled plasma optical emission spectrometry (ICP OES). Principal component analysis (PCA) was also used in the evaluation of the WDXRF and ICP OES data sets. WDXRF calibration models for Cr presented satisfactory figures of merit and the analysis of the leathers revealed an alarming concentration of total Cr in the samples reaching 21,353 mg kg^?1.     

Patterns of mercury and methylmercury bioaccumulation in fish species downstream of a long-term mercury-contaminated site in the lower Ebro River (NE Spain)

Since the 19th century, large amounts of industrial waste were dumped in a reservoir adjacent to a chlor-alkali plant in the lower Ebro River (NE Spain). Previous toxicological analysis of carp populations inhabiting the surveyed area have shown that the highest biological impact attributable to mercury pollution occurred downstream of the discharge site. However, mercury speciation in fish from this polluted area has not been addressed yet. Thus, in the present study, piscivorous European catfish (Silurus glanis) and non-piscivorous common carp (Cyprinus carpio) were selected, to investigate the bioavailability and bioaccumulation capacities of both total mercury (THg) and methylmercury (MeHg) at the discharge site and downstream points. Multiple Correspondence Analysis (MCA) was applied to reduce the dimensionality of the data set, and Multiple Linear Regression (MLR) models were fitted in order to assess the relationship between both Hg species in fish and different variables of interest. Mercury levels in fish inhabiting the dam at the discharge site were found to be approximately 2-fold higher than those from an upstream site; while mercury pollution progressively increased downstream of the hot spot. In fact, both THg and MeHg levels at the farthest downstream point were 3 times greater than those close to the waste dump. This result clearly indicates downstream transport and increased mercury bioavailability as a function of distance downstream from the contamination source. A number of factors may affect both the downstream transport and increased Hg bioavailability associated with suspended particulate matter (SPM) and dissolved organic carbon (DOC).     

Saharan dust episodes and pregnancy

Desert dust is one of the natural contributors to atmospheric particulate matter worldwide. Although particulate pollution has been shown to adversely affect pregnancy, the available evidence on the impact of dust episodes on pregnancy is very scarce. The aim of this study was to evaluate the impact of Saharan dust episodes on pregnancy complications (preeclampsia and bacteriuria) and outcomes (birth weight and gestational age at delivery). This study was based on a cohort of births (N = 3565) that occurred in a major university hospital in Barcelona during 2003-2005. To determine Saharan dust episodes, we developed a two-stage approach based on meteorological evidence of the presence of Saharan dust cloud over the region and unusually high levels of particulate levels on the ground while taking account of traffic sources. The associations between the number of Saharan dust episodes during whole pregnancy as well as each pregnancy trimester and pregnancy complications and outcomes were analysed. There were 152 days (out of 838 days) with Saharan dust cloud over the region from which 45 days were determined as episodic days. We did not observe any statistically significant harmful effect of Saharan dust episodes on our included pregnancy complications and outcomes. However, we observed a small but statistically significant increase in gestational age at delivery in association with the number of episodic days during the third trimester and whole pregnancy (0.8 and 0.5 days respectively). Our findings were not suggestive for any adverse effect of Saharan dust episodes on our included pregnancy complications and outcomes.