Comparative effects of zinc oxide and zinc oxide nanoparticle as feed additives on growth,feed choice test,tissue residues,and histopathological changes in broiler chickens

Environmental Science and Pollution Research - Zinc is an essential nutritional trace mineral required for growth and health. The aim of the current work is to compare the effects of bulk zinc...     

Trihalomethanes formation in water treatment plants and distribution lines: a monitoring and modeling scheme

Monitoring and modeling of the concentrations of trihalomethanes (THMs) within four water treatment plants (WTPs) and distribution lines in Fayoum City, Egypt, were studied. Sampling sites for raw and treated waters were determined by global positioning system and the Arc geographic information system software was used for mapping. THMs were monitored using 25 sampling points located at the plant exit and through the distribution lines up to the plant extremity. Results indicated that the THMs concentration varied significantly but it was very rarely higher than the allowed maximum contaminant level of 100 μg L^?1. However, at the dead zones in the distribution lines, the THMs increased by about 160% compared to in-plant level. Furthermore, the level of THMs in hot months was about 1.3 times higher than in cold ones. The influence of some independent variables such as temperature, pH, ammonia concentration, total organic carbon and color were investigated by Pearson model to find their correlation with the rate of THMs formation in WTPs. The resulted R values ranged from 0.81 to 0.98. Successful application of the model to a selected region on the distribution lines has resulted in a correlation coefficient of 0.98.     

Metal contamination of surface soils of industrial city Sialkot,Pakistan: a multivariate and GIS approach

In this study concentrations of selected metals viz., Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Na, Ni, Pb and Zn in surface soils of Sialkot city known worldwide for tanneries and pharmaceutical industries were measured to assess the status of urban soil pollution and to identify sources of contamination. Hierarchical cluster analysis (HACA) indicated concentrations of Mg and Ca related to parent rock material, Cd, Co, and Pb with traffic related activities, Cr, Cu, Ni and Zn either associated with automobiles activities or industrial pollution and Fe, K and Na related with anthropogenic activities or lithogenous materials. Correlation analyses and principal component analysis based on factor analysis confirmed the results of HACA. Spatial distribution maps exhibited relatively higher concentrations of Cd, Co, Cu, Ni, Pb, Cr and Zn along traffic routes in the city and streams. The results highlighted concentration of Cd, Ni, Cr, Zn, and Pb measured in urban soil exceeded the permissible limit of surface soils and advocated an imperative need for detailed baseline investigations of spatial distribution of heavy metals and other contaminants for the formulation of geochemical database that should be made available to stakeholder involved in monitoring, assessment and conservation of soil contamination for future planning and management of the Sialkot city.     

Effect of land use activities on PAH contamination in urban soils of Rawalpindi and Islamabad, Pakistan

Urbanization can increase the vulnerability of soils to various types of contamination. Increased contamination of urban soils with polycyclic aromatic hydrocarbon (PAH) could relate to increased number of petrol pump stations and mechanical workshops—a phenomenon that needs to be constantly monitored. This study was undertaken to explore the soil PAH levels in Rawalpindi and Islamabad urban areas in relation to land use activities. Composite soil samples from petrol pump stations and mechanical workshops (n?=?32) areas were evaluated for five PAHs––naphthalene, phenanthrene, pyrene, benzo[a]pyrene, and indeno(1,2,3-cd)pyrene—and compared with control area locations with minimum petroleum-related activity (n?=?16). Surface samples up to 3 cm depth were collected and extraction of analytes was carried out using n-hexane and dichloromethane. Prior to running the samples, standards (100 μg ml^–1) were run on HPLC to optimize signal to noise ratio using acetonitrile as mobile phase at a flow rate of 1.25 ml/min at 40 °C. Significant differences between petrol pump stations and mechanical workshop areas were observed for individual PAH as well as with control area soil samples. Naphthalene was found to be the most abundant PAH in soil, ranging from 2.47 to 24.36 mg kg^–1. Correlation between the benzo[a]pyrene (BaP) level in soil and the total PAH concentration (r?=?0.82, P?<?0.0001) revealed that BaP can be used as a potential marker for PAH pollution. A clear segregation between petrogenic and pyrogenic sources of contamination was observed when low molecular weight PAHs detected in soil was plotted against high molecular weight PAHs. The former source comprised lubricants and used engine oil found at mechanical workshops, whereas the latter could be mostly attributed to vehicular emission at petrol pumps. The results indicate that PAH contamination in urban areas of Rawalpindi and Islamabad has direct relevance with land use for petroleum activity. We conclude that in order to reduce the soil PAH exposure in urban environment, petrol pumps and mechanical workshops must be shifted to less densely populated areas because of their role as important point sources for PAH emission.     

Synthesis and characterization of drinking water treatment plant sludge-incorporated Portland cement

Kinetic analysis of thermally activated phase transformations in drinking water treatment plant (DWTP) sludge suggests its applicability in the materials of construction. The suggested prediction has already been verified on the sludge-based bricks. The present study deals with incorporating the same sludge in the raw meal for the synthesis of Portland cement clinkers. For this purpose, two raw meals are prepared with varying sludge loadings. The sludge effect on reactivity of the crude mixture is evaluated on the basis of the free lime content sintered at various elevated temperatures. The results of chemical and mineralogical and scanning electron microscopic analyses reveal fine mineralogical contents of Portland clinkers calcined at 1450 and 1500 °C. Moreover, the cements prepared from these clinkers by the introduction of certain proportions of gypsum, depict significant durability. The obtained results elucidate that the studied DWTP sludge-incorporated Portland cement shows considerable potential to be commercialized.     

Phosphate-arsenate relations to affect arsenic concentration in plant tissues,growth, and antioxidant efficiency of sunflower (Helianthus annuus L.) under arsenic stress

Environmental Science and Pollution Research - Relations between phosphate and arsenate are important but inconsistent to influence arsenic (As) phytotoxicity depending on many plant and soil...     

Selection of an appropriate waste-to-energy conversion technology for Dhaka City,Bangladesh

Solid waste disposal poses a significant problem, as it leads to land pollution if openly dumped, water pollution if dumped in low lands and air pollution if burnt. Moreover, the scarcity of land and increase in land prices especially in Dhaka, the capital city of Bangladesh create the problems of developing new landfill sites. Realising the existing and future impacts of waste disposal issues, the analytic hierarchy process model was applied to select an appropriate Waste-to-Energy (WTE) conversion technology for household waste of Dhaka-Mirpur Cantonment area. Three alternatives, namely, anaerobic digestion, pyrolysis and plasma gasification (PG) technologies and nine criteria under three aspects (technological, environmental and financial) were chosen for comparison. The analysis revealed that PG is the most appropriate WTE conversion technology in the study area. The selected PG technology has a relatively small footprint; it can treat unsorted waste and can produce good-quality synthetic gas without generating extremely toxic by-products.     

Rendering Bio-inert Low-Density Polyethylene Amenable for Biodegradation via Fast High Throughput Reactive Extrusion Assisted Oxidation

Journal of Polymers and the Environment - An energy-efficient high throughput pre-treatment of low-density polyethylene (LDPE) using a fast, reactive extrusion (REX) assisted oxidation technique...     

Natural radionuclides distribution and environmental impacts of ferruginous sand-siltstone (raw material) and their manufactured Ahmer oxide used as wall paints

Commercially known Ahmer oxide paints are prepared from raw material mainly composed of red iron oxides (hematite) and iron oxyhydroxides. The raw material used in manufacturing of Ahmer oxide comes from some localities in southwest Sinai such as Abu Thor, Allouga, and El lehian. The adsorption of uranium and other radioelements on iron oxides could make the raw material (red iron oxides) and their products environmentally hazardous. The studied samples were subjected to radiometric analysis using NaI (Tl) gamma-ray spectrometer. The average activity concentration of U, Th, Ra, and K are 108.7, 458.8, 88.8, and 627.5?Bq?kg^?1, respectively in raw material and 136.4, 14.6, 58.3, and 95.9?Bq?kg^?1 in Ahmer oxide. High values of activity concentrations of ²³⁸U, ²²⁶Ra, and ⁴⁰K were recorded in Allouga and El lehian raw material. High radioactivities of Allouga and El lehian raw material are mainly attributed to the presence of torbernite, zircon, and monazite, in addition to adsorbed elemental uranium in Ahmer oxide. absorbed dose rate (D), annual effective dose equivalent, radium equivalent activity (Ra_eq), external hazard index (H_ex), and internal hazard index (H_in), as well as representative gamma index (Iγ) were determined from the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K. Some of the studied samples do not satisfy the universal standards.