Assessment of individual and mixed toxicity of bromoform,tribromoacetic-acid and 2,4,6 tribromophenol,on the embryo-larval development of Paracentrotus lividus sea urchin

Environmental Science and Pollution Research - Water chlorination is the most widely used technique to avoid microbial contamination and biofouling. Adding chlorine to bromide-rich waters leads to...     

Monitoring and factors affecting levels of airborne and water bromoform in chlorinated seawater swimming pools

Water and air quality of eight seawater swimming pools using chlorine disinfection was measured during four sampling campaigns, spread on one full-year, and in four thalassotherapy centers located in Southeast of France. Concentrations of trihalomethanes(THMs) in air and in water as well as concentrations of parameters, including nonpurgeable organic carbon(NPOC), free residual chlorine(Cl_f), pH, Kjeldhal Nitrogen(KN), salinity,conductivity, bromide ions and, water and air temperature, were measured. Water and air samples were collected in triplicates morning — at the opening of the pools —, noon and night — at the closing of the pools —, in summer and winter. Data analysis was performed by Principal Component Analysis(PCA) and rotated component matrix, from both data quality and other parameters such as TOC, aromaticity(UV_(254)), pH, hygrometry, and free residual chlorine(Cl_f). This statistical analysis demonstrates a high correlation between TOC, Cl_fand UV_(254) and THM levels found in air and water, particularly for the major ones(CHBr_3in water:300.0 μg/L mean, 1029.0 μg/L maximum; CHBr_3 in air: 266.1 μg/m~3 mean,1600.0 μg/m~3 maximum, and CHClBr_2 in water: 18.9 μg/L mean, 81.0 μg/L maximum;CHClBr_2 in air: 13.6 μg/m~3 mean, 150.0 μg/m~3maximum). These high levels of bromoform(CHBr_3) are particularly worrisome in such health institutions, even these levels do not exceed the Permissible Exposure Limit(PEL) of 5 mg/m~3 as an 8 hour time-weighted average currently fixed by various administrations, such as Occupational Safety and Health Administration(OSHA).     

Multivariate optimization of solid-phase extraction applied to iron determination in finished waters

In this work, Amberlite XAD-4 resin functionalized with salicylic acid was synthetized, characterized and applied as a new packing material for an on-line system to iron determination in aqueous samples. The detection method is based on the sorption of Fe(III) ions in a minicolumn containing the synthesized resin, followed by a desorption step using an acid solution and measurement of iron by vis-spectrophotometry (CAS method). The optimization of the solid-phase extraction system was performed using factorial design and Doehlert matrix considering six variables: sample percolation rate (0.5-9 ml min(-1)), sample metal concentration (20-200 microg l(-1)), flow-through sample volume (0-5 ml) (all three directly linked to the extraction step), elution flow-rate (0.5-9 ml min(-1)), concentration and volume of eluent (HCl 0.1-0.5M) (all three directly linked to the elution step). The aim of this study was to obtain a set of operating ranges for the six variables tested in order to obtain--by means of a mathematical function allowing maximisation of each response (desirability function)--at least 90% of iron recovery rates. Using the experimental conditions defined in the optimization, the method allowed iron determination with achieved detection limit of 2.3 microgl(-1) and precision (assessed as the relative standard deviation) of 9.3-2.8% for iron solutions of 10.0-150 microgl(-1). Real samples (coming from a water treatment unit) were used successfully when evaluating potentialities of the developed SPE procedure coupled to a spectrophotometric determination.