Evaluation of heavy metal content in digestate from batch anaerobic co-digestion of sunflower hulls and poultry manure

In this experimental study, the biogas digestate from mesophilic batch anaerobic co-digestion of poultry manure and an agricultural residue, sunflower hulls, was characterized, particularly in terms of heavy metal content, in order to evaluate whether the biogas digestate was suitable for land applications. Ni, Zn, Cu, Pb, Cr, Cd, and Hg were detected in the biogas digestate in each trial, however, their concentrations were always lower than the limit values stated in Turkish regulations. The main source of heavy metals in the biogas digestate seemed to be the poultry manure, not the agricultural residue. The commercial feedstuffs that are frequently supplemented with various essential elements to promote optimum nutrient supply and optimum growth rates may have contributed to heavy metals presence in the biogas digestate. The results indicated that the biogas digestate from anaerobic co-digestion of manure and agricultural residue could be utilized as fertilizer in agricultural applications.     

A numerical study on the effects of EGR and spark timing to combustion characteristics and NOx emission of a GDI engine

EGR is one of the most significant strategies for reducing especially nitrogen oxides (NO_x) emissions from internal combustion engines. The thermal efficiency of spark ignition engines is lower than compression ignition engines because of its lower compression ratio. If the compression ratio is increased to obtain higher thermal efficiency, there may be a knocking tendency in spark ignition engines. EGR can be used in order to reduce NO_x emissions and avoid knocking phenomena at higher compression ratios. In-cylinder temperature at the end of combustion is decreased and heat capacity of fresh charge is increased when EGR applied. Besides EGR, spark timing is another significant parameter for reducing exhaust emissions such as nitrogen oxides, and unburned hydrocarbon (UHC). In this study the effects of EGR and spark timing on spark ignition engine were investigated numerically. KIVA codes were used in order to model combustion process. The combustion process has been modeled for a single cylinder, four stroke and gasoline direct injection (GDI) spark ignition engine. The results showed that in-cylinder pressure and heat release rate decrease as EGR ratio increase. In-cylinder pressure increases with the advancing of spark timing. Advancing spark timing increases the heat release rate and in-cylinder temperature. The simulation results also showed that EGR reduced exhaust gas temperature and NO_x emissions.     

Heat budget for a waste lift placed under freezing conditions at a landfill operated in a northern climate

A landfill operated in Ste. Sophie, Québec, Canada was instrumented to better understand the waste stabilization process in northern climates. Instrument bundles were placed within the waste to monitor temperature, settlement, oxygen, moisture content, total load, mounding of leachate and electrical conductivity. A finite element model was developed to simulate the heat budget for the first waste lift placed in the winter months and was calibrated using the first 10.5 months of collected temperature data. The calibrated model was then used to complete a sensitivity analysis for the various parameters that impact the heat budget. The results of the analysis indicated that the heat required for phase change to thaw the liquid fraction within frozen waste had a significant impact on the heat budget causing sections of waste to remain frozen throughout the simulation period. This was supported by the data collected to date at Ste. Sophie and by other researchers indicating that frozen waste placed during the winter months can remain frozen for periods in access of 1.5 years.     

Correction to: WEEE closed-loop supply chain network management considering the damage levels of returned products

Environmental Science and Pollution Research - A Correction to this paper has been published: https://doi.org/10.1007/s11356-020-11851-4     

AN ANALYSIS OF RISK MITIGATION CONSIDERATIONS IN REGIONAL RECONSTRUCTION IN TURKEY: THE MISSING LINK

Turkey's disastrous earthquakes in 1999 required a monumental task for rebuilding the affected regions. This has now been largely completed by the massive loans borrowed from international institutions and domestic resources. The organization of the resources to accomplish reconstruction is described. Yet, having successfully accomplished the tasks of addressing the long-term needs of the victims in terms of reconstruction/restoration of lost homes and businesses, and dealing with the disruption that the disaster has caused in community life, cannot be viewed as signs that success has been achieved. This article stresses that once the initial shock of the disaster has worn off, institutional adjustments required for mitigation for future disasters have not been enacted vigorously.     

Assessing washing methods for reduction of pesticide residues in Capia pepper with LC-MS/MS

Abstract

The effects of washing treatments on removal rates of some pesticides residues (acetamiprid, chlorpyrifos and formetanate hydrochloride) on pepper were investigated. Method verification was conducted through spiking pepper samples at 0.1, 1.0 and 10.0 × MRL. QuEChERS method produced average recovery of 104.91% with relative standard deviation (RSD) of 13.41%. LOQ values of acetamiprid, chlorpyrifos and formetanate hydrochloride were estimated as 2, 10 and 5?µg/kg, respectively. Capia peppers grown in open fields were sprayed three times with pesticides. Peppers were harvested after 1st, 2nd and 3rd day of the treatments. Then the peppers were subjected to tap water, acetic acid and citric acid washing and ultrasonic cleaning treatments (for 2 and 5?min). Based on three different harvest times and two different washing durations, processing factors (PFs) and reduction rates were calculated for each washing treatment. The residues gradually decreased during washing treatments with increasing process duration. Similarly, a gradual reduction was noted with the progress of harvest times. This in turn corresponded to an increase in PF. Ultrasonic cleaning and citric acid (9%) washing were more effective than the others. Non-systemic pesticides (chlorpyrifos) were more readily removed than the systemic ones (acetamiprid). Similarly, highly soluble pesticides exhibited higher reduction.     

Determination of biogas generation potential as a renewable energy source from supermarket wastes

Fruit, vegetable, flower waste (FVFW), dairy products waste (DPW), meat waste (MW) and sugar waste (SW) obtained from a supermarket chain were anaerobically digested, in order to recover methane as a source of renewable energy. Batch mesophilic anaerobic reactors were run at total solids (TS) ratios of 5%, 8% and 10%. The highest methane yield of 0.44 L CH₄/g VS_added was obtained from anaerobic digestion of wastes (FVFW + DPW + MW + SW) at 10% TS, with 66.4% of methane (CH₄) composition in biogas. Anaerobic digestion of mixed wastes at 5% and 8% TS provided slightly lower methane yields of 0.41 and 0.40 L CH₄/g VS_added, respectively. When the wastes were digested alone without co-substrate addition, the highest methane yield of 0.40 L CH₄/g VS_added was obtained from FVFW at 5% TS. Generally, although the volatile solids (VS) conversion percentages seemed low during the experiments, higher methane yields could be obtained from anaerobic digestion of supermarket wastes. A suitable carbon/nitrogen (C/N) ratio, proper adjustment of the buffering capacity and the addition of essential trace nutrients (such as Ni) could improve VS conversion and biogas production yields significantly.     

Monitoring of organic pollutants in marine environment by semipermeable membrane devices and mussels: accumulation and biochemical responses

This study involves the monitoring of organic pollutants using transplanted mussels (Mytilus galloprovincialis) as bioindicator organisms and semipermeable membrane devices (SPMDs) as passive samplers. Mussels and SPMDs were deployed to marinas, shipyards and shipbreaking yards on the coastal area of Turkey and retrieved after 60 days. Polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB) and organochlorine pesticide (OCP) compounds were analysed with high-resolution GC-MS. Total PAH concentrations in SPMDs and mussels ranged from 200 to 4740 ng g sampler^?1 and from 7.0 to 1130 ng g^?1 in wet weight (ww). PCB and OCP concentrations in SPMDs changed between 0.04–200 and 4.0–26 ng g sampler^?1, respectively. The highest PCB (190 ng g^?1 ww) and OCP (200 ng g^?1 ww) concentrations in mussels were measured at shipyard stations. A strong correlation was observed between the PAH and PCB concentrations in SPMDs and mussels. Enzyme assays (acetylcholinesterase, ethoxyresorufin-O-deethylase, glutathione S-transferase, glutathion reductase and carboxylesterase activities) were performed as biomarkers to reveal the effects of pollution on the mussels. There was no clear relationship found between the enzyme levels and the pollutant concentrations in mussels. Integrated biomarker responses were calculated to interpret the overall effect of pollutants.

     

土地利用变化下的生态系统服务敏感性研究——以克里雅绿洲为例

通过剖析传统的敏感性分析法,提出交叉敏感性概念,评价生态服务价值对土地利用类型转换的响应性。以克里雅绿洲为研究区域,以1991、2002 和2011 年三期遥感影像数据为基本信息源,运用交叉敏感性分析,计算生态系统服务价值对土地利用类型转换的敏感性,确定生态系统日趋敏感的土地利用变化过程,为土地管理对策提供参考依据。研究结果表明:20 a来,克里雅绿洲生态服务价值较敏感的土地利用转换类型相对稳定,主要集中在湿地和水体向荒漠和低覆盖度草地的转换;与1991 和2011 年相比,2002 年的交叉敏感性系数普遍上升,这主要是因为湿地、水体面积的减少加剧了研究区的生态脆弱性,从而表现出更大的敏感性;湿地和水体向耕地转换的交叉敏感性一直处于上升趋势,并不断接近于-1,表明生态服务价值对高强度的人为活动变得越来越敏感,从而警示地方管理部门采取必要措施制止此种转换的持续。     

Application of the luminescence single-aliquot technique for dose estimation in the Marmara Sea

The aim of this study is to obtain the equivalent dose, which is the important quantity for all the studies related to the use of luminescence in dating sediments. Recent advances in luminescence dating have led to increasing application of the technique to sediment from the depositional environmental samples. The sample used in this study is the active main fault sample that was collected from the Sea of Marmara in NW Turkey. Equivalent dose was measured using both the multiple-aliquots and the single-aliquot techniques. In this study single aliquot regeneration on additive dose (SARA) procedure was also used. The result obtained was not in agreement with the results evaluated from the multiple-aliquots procedure. So a simple modification was suggested for SARA procedure. In our modified procedure the calculated dose (D) values were obtained by using the additive dose protocol instead of regeneration protocol.