Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data acquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1-200 microg/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 microg/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 mu g/flower and 60 mu g/flower for cv "Extazy" and cv "reina de corazones" watermelons, respectively). One month after treatment, 20 "Extazy" watermelon units (1.5-2 kg/unit) and 20 "Reina de corazones" watermelon units (4-5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 microg/kg.     

Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios

The goal of this work was to study the mechanical behavior of concrete with recycled Polyethylene Therephtalate (PET), varying the water/cement ratio (0.50 and 0.60), PET content (10 and 20 vol%) and the particle size. Also, the influence of the thermal degradation of PET in the concrete was studied, when the blends were exposed to different temperatures (200, 400, 600 °C). Results indicate that PET-filled concrete, when volume proportion and particle size of PET increased, showed a decrease in compressive strength, splitting tensile strength, modulus of elasticity and ultrasonic pulse velocity; however, the water absorption increased. On the other hand, the flexural strength of concrete-PET when exposed to a heat source was strongly dependent on the temperature, water/cement ratio, as well as on the PET content and particle size. Moreover, the activation energy was affected by the temperature, PET particles location on the slabs and water/cement ratio.     

Distribution of uranium isotopes in surface water of the Llobregat river basin (Northeast Spain)

A study is presented on the distribution of ²³⁴U, ²³⁸U, ²³⁵U isotopes in surface water of the Llobregat river basin (Northeast Spain), from 2001 to 2006. Sixty-six superficial water samples were collected at 16 points distributed throughout the Llobregat river basin. Uranium isotopes were measured by alpha spectrometry (PIPS detectors). The test procedure was validated according to the quality requirements of the ISO17025 standard. The activity concentration for the total dissolved uranium ranges from 20 to 261 mBq L⁻¹. The highest concentrations of uranium were detected in an area with formations of sedimentary rock, limestone and lignite. A high degree of radioactive disequilibrium was noted among the uranium isotopes. The ²³⁴U/²³⁸U activity ratio varied between 1.1 and 1.9 and the waters with the lowest uranium activity registered the highest level of ²³⁴U/²³⁸U activity ratio. Correlations between uranium activity in the tested water and chemical and physical characteristics of the aquifer were found.     

Effect of temperature and organic nutrients on the biodegradation of linear alkylbenzene sulfonate (LAS) during the composting of anaerobically digested sludge from a wastewater treatment plant

Limits on the application of biosolids (anaerobically processed sludges from wastewater treatment plants) as fertilizers for the amendment of soil are becoming greater because of the accumulation of recalcitrant substances, making necessary the use of techniques that bring the concentration of xenobiotics to lower concentrations than those permitted. In general, the biosolids composting process is sufficient to reduce the usual concentration of linear alkylbenzene sulfonates (LAS) to low levels. In this work, an assessment is made on the effect of temperature in the capacity of enriched bacterial populations to biodegrade LAS, together with the influence that the available nutrients may have in the biodegradation of these compounds. The results show that the microbial metabolism of LAS was not observed in the thermophilic range. The optimum temperature for the biodegradation of LAS appears to be around 40 degrees C, this is, the lowest assayed here, and at this temperature the differences in the biodegradation of LAS among the nutritionally supplemented cultures are small.     

A Comparison of Bayesian Methods for Uncertainty Analysis in Hydraulic and Hydrodynamic Modeling

We evaluate and compare the performance of Bayesian Monte Carlo (BMC), Markov chain Monte Carlo (MCMC), and the Generalized Likelihood Uncertainty Estimation (GLUE) for uncertainty analysis in hydraulic and hydrodynamic modeling (HHM) studies. The methods are evaluated in a synthetic 1D wave routing exercise based on the diffusion wave model, and in a multidimensional hydrodynamic study based on the Environmental Fluid Dynamics Code to simulate estuarine circulation processes in Weeks Bay, Alabama. Results show that BMC and MCMC provide similar estimates of uncertainty. The posterior parameter densities computed by both methods are highly consistent, as well as the calibrated parameter estimates and uncertainty bounds. Although some studies suggest that MCMC is more efficient than BMC, our results did not show a clear difference between the performance of the two methods. This seems to be due to the low number of model parameters typically involved in HHM studies, and the use of the same likelihood function. In fact, for these studies, the implementation of BMC results simpler and provides similar results to MCMC. The results of GLUE are, on the other hand, less consistent to the results of BMC and MCMC in both applications. The posterior probability densities tend to be flat and similar to the uniform priors, which can result in calibrated parameter estimates centered in the parametric space.     

Recovery of Francisella tularensis from soil samples by filtration and detection by real-time PCR and cELISA

The aim of this study was to develop a specific and highly sensitive method able to detect very low concentrations of Francisella tularensis in soil samples by real-time PCR (qPCR) with SYBR Green I. tul4 gene, which encodes the 17-kDa protein (TUL4) in F. tularensis strains, was amplified using a LightCycler (LC) device. We achieved a detection limit of 0.69 fg of genomic DNA from F. tularensis subp. holarctica live vaccine strain (LVS), corresponding to a value less than 3.4 genome equivalents per reaction. The qPCR was shown to be specific, highly sensitive and reproducible. In addition, we evaluated 2 new methods for recovering bacteria from soil based on 1-step filtration using glass fiber filters and PVDF filters. These filtration methods enabled us to recover F. tularensis efficiently from soil samples. As few as 50 CFU per 0.5 g of soil were detected by qPCR. Capture enzyme-linked immunosorbent assay (cELISA) allowed us to detect and quantify the amount of bacteria recovered from soil by an immunological method. Although qPCR was more sensitive than cELISA, we did not observe substantial differences in the amount of bacteria quantified by both methods.     

Occurrence and treatment of arsenic in groundwater and soil in northern Mexico and southwestern USA

This review focuses on the occurrence and treatment of arsenic (As) in the arid region of northern Mexico (states of Chihuahua and Coahuila) and bordering states of the southwestern US (New Mexico, Arizona, and Texas), an area known for having high As concentrations. Information assembled and assessed includes the content and probable source of As in water, soil, and sediments and treatment methods that have been applied in the area. High As concentrations were found mainly in groundwater, their source being mostly from natural origin related to volcanic processes with significant anthropogenic contributions near mining and smelting of ores containing arsenic. The affinity of As for solid phases in alkaline conditions common to arid areas precludes it from being present in surface waters, accumulating instead in sediments and shifting its threat to its potential remobilization in reservoir sediments and irrigation waterways. Factors such as oxidation and pH that affect the mobility of As in the subsurface environment are mentioned. Independent of socio-demographic variables, nutritional status, and levels of blood lead, cognitive development in children is being affected when exposed to As. Treatments known to effectively reduce As content to safe drinking water levels as well as those that are capable of reducing As content in soils are discussed. Besides conventional methods, emergent technologies, such as phytoremediation, offer a viable solution to As contamination in drinking water.     

Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data adquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1–200 μ g/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 μ g/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 μ g/flower and 60 μ g/flower for cv “Extazy” and cv “reina de corazones” watermelons, respectively). One month after treatment, 20 “Extazy” watermelon units (1.5–2 kg/unit) and 20 “Reina de corazones” watermelon units (4–5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 μ g/kg.     

Regional integration and local change: road paving, community connectivity, and social–ecological resilience in a tri-national frontier, southwestern Amazonia

Initiatives for global economic integration increasingly prioritize new infrastructure in relatively remote regions. Such regions have relatively intact ecosystems and provide valuable ecosystem services, which has stimulated debates over the wisdom of new infrastructure. Most prior research on infrastructure impacts highlights economic benefits, ecological damage, or social conflicts. We suggest a more integrative approach to regional integration by appropriating the concepts of connectivity from transport geography and social?Cecological resilience from systems ecology. Connectivity offers a means of observing the degree of integration between locations, and social?Cecological resilience provides a framework to simultaneously consider multiple consequences of regional integration. Together, they offer a spatial analysis of resilience that considers multiple dimensions of infrastructure impacts. Our study case is the southwestern Amazon, a highly biodiverse region which is experiencing integration via paving of the Inter-Oceanic Highway. Specifically, we focus on the ??MAP?? region, a tri-national frontier where Bolivia, Brazil, and Peru meet and which differs in the extent of highway paving. We draw on a tri-national survey of more than 100 resource-dependent rural communities across the MAP frontier and employ indicators for multiple dimensions of connectivity and social?Cecological resilience. We pursue a comparative analysis among regions and subregions with differing degrees of community connectivity to markets in order to evaluate their social?Cecological resilience. The findings indicate that connectivity and resilience have a multifaceted relationship, such that greater community connectivity corresponds to greater resilience in some respects but not others. We conclude by noting how our findings integrate those from heretofore largely disparate literatures on infrastructure. The integration of transport geography with resilience thought thus stands to advance the study of infrastructure impacts.