Spatial distribution and ecological risk assessment of sediment metals in a highly industrialized coastal zone southwestern Taiwan

Spatial variations of Cr, Cu, Hg, Ni, Pb, and Zn in the surface sediments from 34 stations of the Kaohsiung coastal zone southwestern Taiwan were studied to address the current pollution status, sediment quality, and potential ecological risk. The study revealed that the concentrations of sediment metals in Kaohsiung Harbor were alarmingly high compared to the other region of Kaohsiung coast. The concentrations of Cr, Cu, Hg, Ni, Pb, and Zn in the harbor sediments were as high as 351, 247, 1.93, 61.8, 60.9, and 940 mg kg⁻¹, respectively. The current situation of metal pollution was assessed by different pollution indices and results showed moderate to severe enrichment of Cu, Hg, and Zn in the harbor sediments. According to the degree of contamination, pollution load index, and contamination severity index, the sediments from the inner Kaohsiung Harbor show high degree and high severity of metal contamination, while the rest of Kaohsiung coastal areas show uncontaminated or low-level pollution. Results of mean ERM quotient and potential ecological risk index also indicated that the harbor sediments posed a 49% probability of biological toxicity and very high ecological risk. The toxic units indicated that the negative biological effects of the six metals in the harbor sediments were Zn > Cu > Cr > Ni > Hg > Pb. In contrast to Kaohsiung Harbor as a trap where considerable amount of anthropogenic metal loadings accumulated in sediments, low metal concentrations were observed in most Kaohsiung coastal sediments. It probably resulted from the limited fine-grained sediment deposition. In the wave-dominated Kaohsiung coastal zone, fine-grained sediments associated with polluted metals tend to be easily resuspended and transported offshore via waves and wave-induced currents. The results of this study can provide valuable information for river and coastal zone management.

     

Composition and source apportionment of PAHs in sediments at river mouths and channel in Kaohsiung Harbor, Taiwan

Fifty-eight sediment samples were collected in 2009 from the bottom of river mouths near Kaohsiung Harbor (Taiwan) and the harbor channel for the analyses of polycyclic aromatic hydrocarbons (PAHs) using gas chromatography-mass spectrometry (GC-MS). Concentrations of total PAHs varied from 39 to 30,521 ng g(-1) (dry weight); samples collected from the mouths of Love River, Canon River, Jen-Gen River, and Salt River showed the highest PAHs concentrations. This indicates that the major sources of sediment PAHs come from those polluted urban rivers and the harbor channel. In samples collected from the Salt River mouth, approximately 43% of the PAHs are identified as PAHs with 2 or 3 rings. However, samples collected from other locations contain predominantly PAHs with 4 rings (32 to 42%) or 5 and 6 rings (36 to 44%). Emissions from traffic-related sources and waste incineration contribute to the majority of PAHs found in most channel and river mouth sediments. However, coal/oil combustion is the main cause of high concentrations of PAHs observed in the Salt River mouth sediments. Principal component analyses with multivariate linear regression (PCA/MLR) have been used to further quantify the source contributions, and the results show that the contributions of coal/oil combustion, traffic-related and waste incineration are 37%, 33% and 30%, respectively.     

Control of petroleum-hydrocarbon contaminated groundwater by intrinsic and enhanced bioremediation

In the first phase of this study, the e ectiveness of intrinsic bioremediation on the containment of petroleum hydrocarbons was evaluated at a gasoline spill site. Evidences of the occurrence of intrinsic bioremediation within the BTEX (benzene, toluene, ethylbenzene, and xylenes) plume included (1) decreased BTEX concentrations; (2) depletion of dissolved oxygen (DO), nitrate, and sulfate; (3) production of dissolved ferrous iron, methane, and CO2; (4) deceased pH and redox potential; and (5) increased methanogens, total heterotrophs, and total anaerobes, especially within the highly contaminated areas. In the second phase of this study, enhanced aerobic bioremediation process was applied at site to enhance the BTEX decay rates. Air was injected into the subsurface near the mid-plume area to biostimulate the naturally occurring microorganisms for BTEX biodegradation. Field results showed that enhanced bioremediation process caused the change of BTEX removal mechanisms from anaerobic biodegradation inside the plume to aerobic biodegradation. This variation could be confirmed by the following field observations inside the plume due to the enhanced aerobic bioremediation process: (1) increased in DO, CO2, redox potential, nitrate, and sulfate, (2) decreased in dissolved ferrous iron, sulfide, and methane, (3) increased total heterotrophs and decreased total anaerobes. Field results also showed that the percentage of total BTEX removal increased from 92% to 99%, and the calculated total BTEX first-order natural attenuation rates increased from 0.0092% to 0.0188% per day, respectively, after the application of enhanced bioremediation system from the spill area to the downgradient area (located approximately 300 m from the source area).     

Butyltin contamination in sediments and seawater from Kaohsiung Harbor, Taiwan

The distribution of butyltin (BT) compounds in the sediments and seawater, at the river outfalls, fishing ports, shipyards, and industrial zone docks of Kaohsiung Harbor, Taiwan were investigated. Twenty sediment and seawater samples were collected from various locations in the Harbor in 2006 and analyzed for monobutyltin (MBT), dibutyltin (DBT), and tributyltin (TBT). Results showed that the concentration of total BTs varied from 1.5 to 151 ng/g in sediment samples, with TBT being the major component of the sediment samples. This suggests that sediments could be the most possible sink of TBT brought by the sorption mechanism. The concentrations of BTs ranged from 9.7 to 270 ng/L in seawater samples, whereas DBT and MBT, the degradation byproducts of TBT, were mainly the most abundant BT compounds of the seawater samples. This indicates that the abiotic or biotic degradation potential of TBT was significant. Spatially, the highest concentrations of BTs were observed in both water and sediment samples collected from the shipyard and fishing port areas. This indicates that the shipping-related activities (e.g., navigation, ship repair, and ship building) would contribute most of BTs in the environment. Results show that the concentrations of degradation products (DBT and MBT) were related closely to temperature, salinity, dissolved oxygen (DO), and chlorophyll-a of the seawater. This implies that seasonal changes of the water parameters controlled the degradation of TBT in seawater. The observed levels of BT compounds in both seawater and sediments were much higher than those required to induce toxic effects on marine organisms, suggesting that appropriate TBT control strategies should be taken in Kaohsiung Harbor.     

Distribution and accumulation of heavy metals in the sediments of Kaohsiung Harbor, Taiwan

The distribution, enrichment, and accumulation of heavy metals in the sediments, especially those at the vicinity of tributary estuaries of Kaohsiung Harbor, Taiwan were investigated. Sediment samples from six locations in the Kaohsiung Harbor were collected quarterly in the period from 2002 to 2005 and characterized for metal content (e.g., Hg, Pb, Cd, Cr, Cu, Zn and Al), water content, organic matter, total nitrogen, total phosphorous, total grease, and grain size. Results showed that metal concentrations varied from 0.58 mg kg(-1) for Cd to 596 mg kg(-1) for Zn. Metal concentrations at the vicinity of river mouths were higher than those at other locations. All heavy metals studied, except Cr, had relatively high enrichment factors and geo-accumulation indices in the estuaries. Moreover, metal concentrations correlated closely to the physical-chemical properties of the sediments, which strongly suggested the influence of industrial and municipal wastewaters discharged from the neighboring industrial parks and river basins. Results would help develop strategies for pollution control and sediment remediation of Kaohsiung Harbor.     

The efficacy and cytotoxicity of iron oxide-carbon black composites for liquid-phase toluene oxidation by persulfate

Environmental Science and Pollution Research - This study evaluated the oxidation of toluene (TOL) by persulfate (PS) in aqueous solution in the presence of a Fe3O4-carbon black (CB) composite...     

Distribution and contamination status of chromium in surface sediments of northern Kaohsiung Harbor, Taiwan

The distribution, enrichment, accumulation, and potential ecological risk of chromium (Cr) in the surface sediments of northern Kaohsiung Harbor, Taiwan, China were investigated. Sediment samples from ten locations located between the river mouths and harbor entrance of northern Kaohsiung Harbor were collected quarterly in 2011 and characterized for Cr, aluminum, water content, organic matter, total nitrogen, total phosphorous, total grease, and grain size. Results showed that the Cr concentrations varied from 27.0 to 361.9 mg/kg with an average of (113.5±87.0) mg/kg. High Cr concentration was observed near the Jen-Gen River mouth. The mean Cr concentration was high at 255.5 mg/kg, which was at least 2 to 7 times than that of other sites. This might imply significant Cr contribution from upstream receiving tanneries wastewater into the Jen-Gen River. The spatial distribution of Cr reveals relatively high in the river mouth region, especially in Jen-Gen River, and gradually diminishes toward the harbor entrance region. This indicates that the major sources of Cr pollution from upstream industrial and municipal wastewaters discharged along the river bank; and Cr may drift with sea current and be dispersed into open sea. Moreover, Cr concentrations correlated closely to the physical-chemical properties of the sediments, which suggested the influence of industrial and municipal wastewaters discharged from the neighboring industrial parks and river basins. Results from the enrichment factor and geo-accumulation index analyses imply that the Jen-Gen River sediments can be characterized as moderate enrichment and none to medium accumulation of Cr, respectively. However, results of potential ecological risk index indicate that the sediment has low ecological potential risk. The results can provide valuable information to developing future strategies for the management of river mouth and harbor.