Adsorption of simazine on zeolite H-Y and sol–gel technique manufactured porous silica: A comparative study in model and natural waters

In this work, we studied the removal of simazine from both a model and well water by adsorption on two different adsorbents: zeolite H-Y and a porous silica made in the laboratory by using the sol–gel technique. The pH dependence of the adsorption process and the isotherms and pseudo-isotherms of adsorption were studied. Moreover, an iterative process of simazine removal from both the model and well water, which allowed us to bring the residual simazine concentration below the maximum concentration (0.05 mg L^?1) of agrochemicals in wastewater to be released in surface waters or in sink allowed by Italian laws, was proposed. The results obtained were very interesting and the conclusions drawn from them partly differed from what could reasonably be expected.     

Towards a rational design of materials for the removal of environmentally relevant cations: polymer inclusion membranes (PIMs) and surface-modified PIMs for Sn2+ sequestration in aqueous solution

Environmental Science and Pollution Research - This work is focused on the design and preparation of polymer inclusion membranes (PIMs) for potential applications for stannous cation sequestration...     

Carbon deposition in soil rhizosphere following amendments with compost and its soluble fractions, as evaluated by combined soil-plant rhizobox and reporter gene systems

We determined the organic carbon released by roots of maize plants (Zea mays L.) when grown in soils amended with compost and its soluble fractions. In rhizobox systems, soil and roots are separated from the soil of a lower compartment by a nylon membrane. Treatments are applied to the upper compartment, while in the lower compartment luminescent biosensors measure the bioavailable organic carbon released by roots (rhizodeposition). The rhizobox-plants systems were amended with a compost (COM), its water extract (TEA), the hydrophobic (HoDOM) and hydrophilic (HiDOM) fractions of the dissolved organic matter (DOM) extracted from the compost. After root development, the lower untreated compartments were sampled and sliced into thin layers. The bioavailable organic carbon in each layer was assessed with the lux-marked biosensor Pseudomonas fluorescens 10586 pUCD607, and compared with total organic carbon (TOC) analyses. The TOC values ranged between 8.4 and 9.6 g kg(-1) and did not show any significant differences between bulk and rhizosphere soil samples in any treatment. Conversely, the biosensor detected significant differences in available C compounds for rhizosphere soils amended with various organic materials. Concentrations of available organic compounds in the first 2 mm of soil rhizosphere were 1.69 (control), 1.09 (COM), 2.87 (HiDOM), 4.73 (HoDOM) and 2.14 (TEA)micromol Cg(-1) soil g(-1) roots. The applied rhizobox-biosensor integrated method was successful in detecting and quantifying effects of organic amendments on organic carbon released by maize plant roots. This approach may become important in assessing the carbon cycle in agricultural soils and soil-atmosphere compartments.     

Occurrence of PCDD/Fs in urban air before and after the ban of leaded gasoline

The source of PCDDs and PCDFs in automotive exhaust is not yet fully explained. The chlorinated hydrocarbons used in the formulation of lead-alkyl additives were suspected as a possible major source. Based on this, the decreasing use of leaded gasoline followed by its final ban (occurred on 1/1/2002, in Italy) should have resulted in a decreasing presence of PCDD/Fs in urban air and possibly some differences in their profile. To investigate these aspects, we monitored PCDD/Fs for one year starting in September 2001, at a medium-traffic road site in Rome, with weekly frequency. Results were then compared with those obtained in a previous study performed before the ban (from February 2000 to January 2001) at the same site. As compared with the previous study, the yearly-averaged overall PCDD/F concentration, as toxic equivalent of 2,3,7,8-TCDD, decreased from 60 to 50 fg m(-3) I-TEQ; it remained unchanged, however, if one sample with a particularly high PCDD/F content was excluded from each data set. The monthly trend confirmed the one found in the former study. On an annual basis, the two mean congener profiles were almost identical. The concentration levels and the constancy of profiles, as calculated for the two periods, do not support the hypothesis of a major role of leaded gasoline, substantially different from unleaded one, in contributing to PCDD/F air pollution.     

Accumulation of heavy metals from contaminated soil to plants and evaluation of soil remediation by vermiculite

We evaluated the distribution of 15 metal ions, namely Al, Cd, Cu, Cr, Fe, La, Mn, Ni, Pb, Sc, Ti, V, Y, Zn and Zr, in the soil of a contaminated site in Piedmont (Italy). This area was found to be heavily contaminated with Cu, Cr and Ni. The availability of these metal ions was studied using Tessier’s sequential extraction procedure: the fraction of mobile species, which potentially is the most harmful for the environment, was much higher than that normally present in unpolluted soils. This soil was hence used to evaluate the effectiveness of treatment with vermiculite to reduce the availability of the pollutants to two plants, Lactuca sativa and Spinacia oleracea, by pot experiments. The results indicated that the addition of vermiculite significantly reduces the uptake of metal pollutants by plants, confirming the possibility of using this clay in amendment treatments of metal-contaminated soils. The effect of plant growth on metal fractionation in soils was investigated. Finally, the sum of the metal percentages extracted into the first two fractions of Tessier’s protocol was found to be suitable in predicting the phytoavailability of most of the pollutants present in the investigated soil.     

The use of mosses as environmental metal pollution indicators

The possibility of using mosses as environmental indicators of metal pollution has been investigated. Mosses of the species Bryum argenteum were collected from different parts of Piedmont (Italy), ranging from highly polluted areas to nearly uncontaminated mountain areas. Periodical samplings were planned in every site on a monthly base, in order to check variations of metal uptake throughout one year; correlations with pluviometric and thermal patterns were investigated for all sampling stations. On every moss sample 20 elements, ranging from major (K, P, Al, Ca, Fe and Mg) to minor (Mn, Na, Ti and Zn) and trace (As, Ba, Cd, Co, Cr, Cu, Li, Ni, Pb and Sr), were quantitatively determined by inductively coupled plasma-atomic emission spectrometry or graphite furnace-atomic absorption spectrometry, depending on the needed sensitivity. Statistical analyses, carried out with principal component analysis and cluster analysis methods, revealed that a good correlation exists between metal content in mosses and pollution degree in the areas sampled.     

In vivo assessment of the biomechanical properties of the uterine cervix in pregnancy

Measuring the stiffness of the cervix might be useful in the prediction of preterm delivery or successful induction of labor. For that purpose, a variety of methods for quantitative determination of physical properties of the pregnant cervix have been developed. Herein, we review studies on the clinical application of these new techniques. They are based on the quantification of mechanical, optical, or electrical properties associated with increased hydration and loss of organization in collagen structure. Quasi-static elastography determines relative values of stiffness; hence, it can identify differences in deformability. Quasi-static elastography unfortunately cannot quantify in absolute terms the stiffness of the cervix. Also, the current clinical studies did not demonstrate the ability to predict the time point of delivery. In contrast, measurement of maximum deformability of the cervix (e.g. quantified with the cervical consistency index) provided meaningful results, showing an increase in compliance with gestational age. These findings are consistent with aspiration measurements on the pregnant ectocervix, indicating a progressive decrease of stiffness along gestation. Cervical consistency index and aspiration measurements therefore represent promising techniques for quantitative assessment of the biomechanical properties of the cervix. © 2013 John Wiley & Sons, Ltd.     

A soil alteration index based on phospholipid fatty acids

Phospholipid fatty acid (PLFA) analysis has gained great importance in the study of soil microbial community structure. This structure can give indication of the soil status. Purpose of the present paper is to analyse PLFA patterns in altered agricultural soils in order to develop a soil status alteration index. Soils subjected either to intensive agricultural exploitation, or to overflow by municipal and industrial wastes, or to irrigation with saline waters were analysed for PLFA content and compared to adjacent untreated soils by means of different statistical techniques.

Principal component analysis separated PLFAs in three groups: unsaturated PLFAs (first axis, 48% of total variance), monounsaturated and cyclopropane PLFAs (second axis, 28% of total variance) and polyunsaturated PLFAs (third axis, 24% of total variance).

By means of canonical discriminant analysis, a soil alteration index (SAI) was produced from 15 PLFAs using two data sets. A third data set was used to test the SAI general validity together with other data sets reported in literature. The index validity was confirmed in most cases: SAI gave higher scores for control soils and was generally able to classify soils according to their reported degree of alteration.     

Distribution and mobility of metals in contaminated sites. chemometric investigation of pollutant profiles

The distribution and mobility of heavy metals in the soils of two contaminated sites in Piedmont (Italy) was investigated, evaluating the horizontal and vertical profiles of 15 metals, namely Al, Cd, Cu, Cr, Fe. La, Mn, Ni, Pb, Sc, Ti, V, Y, Zn and Zr. The concentrations in the most polluted areas of the sites were higher than the acceptable limits reported in Italian and Dutch legislations for soil reclamation. Chemometric elaboration of the results by pattern recognition techniques allowed us to identify groups of samples with similar characteristics and to find correlations among the variables. The pollutant mobility was studied by extraction with water, dilute acetic acid and EDTA and by applying Tessier's procedure. The fraction of mobile species, which potentially is the most harmful for the environment, was found to be higher than the one normally present in unpolluted soils, where heavy metals are, to a higher extent, strongly bound to the matrix.     

Trace metals used as natural markers for discriminating some karstic freshwaters near Trieste (Italy)

Some heavy metals have been determined using voltammetry in freshwaters forming part of a karstic hydrological system (the Timavo River, north of Trieste), during attempts to characterize and discriminate the different sources of the springs. The trace elements can be considered natural markers, with lead appearing to be the most discriminating variable. Non parametric statistics and cluster analysis were used to estimate the significance of the determined parameters with respect to the considered ecosystem.