Monitoring of Phenol in Wastewater Bioremediation by HPLC

Bioremediation emphasizes the detoxification and destruction of toxic substances by microorganisms. Wastewater obtained from an industrial concern was solvent extracted with methyl alcohol and dichloromethane and analysed by GC/MS. Besides phenol, a large variety of organic compounds were detected. Under controlled laboratory conditions, the wastewater was innoculated with a mixed culture of microorganisms specially selected for their abilities to degrade phenol. Samples were collected at regular intervals from the stirred tank bioreactor and analysed for phenol by reverse phase HPLC with a C18 column. Results shows that from an initial phenol concentration of 987 ppm, slightly more than 50% was destroyed within 163 hours. The dry weight of the microorganisms and the plate count (CFU/ml) shows a steady increase from 0.5238 gms to 0.5355 gms and from 1.1E+9 to 1.94E+13 respectively over the same period. This suggested that the phenol was consumed by the microorganisms as the sole carbon source.     

A land use regression model for predicting ambient volatile organic compound concentrations in Toronto,Canada

More than 25 studies have employed land use regression (LUR) models to estimate nitrogen oxides and to a lesser extent particulate matter indicators, but these methods have been less commonly applied to ambient concentrations of volatile organic compounds (VOCs). Some VOCs have high plausibility as sources of health effects and others are specific indicators of motor vehicle exhaust. We used LUR models to estimate spatial variability of VOCs in Toronto, Canada. Benzene, n-hexane and total hydrocarbons (THC) were measured from July 25 to August 9, 2006 at 50 locations using the TraceAir organic vapor monitors. Nitrogen dioxide (NO₂) was also sampled to assess its spatial pattern agreement with VOC exposures. Buffers for land use, population density, traffic density, physical geography, and remote sensing measures of greenness and surface brightness were also tested. The remote sensing measures have the highest correlations with VOCs and NO₂ levels (i.e., explains >36% of the variance). Our regression models explain 66–68% of the variance in the spatial distribution of VOCs, compared to 81% for the NO₂ model. The ranks of agreement between various VOCs range from 48 to 63% and increases substantially – up to 75% – for the top and bottom quartile groups. Agreements between NO₂ and VOCs are much smaller with an average rank of 36%. Future epidemiologic studies may therefore benefit from using VOCs as potential toxic agents for traffic-related pollutants.     

Microbial conversion of fungicide vinclozolin

An ecological safety study of using vinclozolin in field and laboratory experiments showed that the effect of the preparation led to a decrease in the abundance of actinomycetes and mycelial fungi and an enhancement of nitrification. The residual amounts of vinclozolin in soil after 12 months were 6-12% of the dose introduced. The persistent chlorinated derivatives of the toxicant were found. Microbial strains pertaining to the genera Pseudomonas and Bacillus were isolated that utilized vinclozolin as the sole source of carbon and energy.     

Bioaccumulation and depuration of chromium in the selected organs and whole body tissues of freshwater fish Cirrhinus mrigala individually and in binary solutions with nickel

Contamination of aquatic ecosystems with heavy metals has been receiving increased worldwide attention due to their harmful e ects on human health and other organisms in the environment. Most of the studies dealing with toxic e ects of metals deal with single metal species, while the aquatic organisms are typically exposed to mixtures of metals. Hence, in order to provide data supporting the usefulness of freshwater fish as indicators of heavy metal pollution, it has been proposed in the present study to investigate the bioaccumulation and depuration of chromium in the selected organs of freshwater fingerlings Cirrhinus mrigala, individually and in binary solutions with nickel. The results show that the kidney is a target organ for chromium accumulation, which implies that it is also the “critical” organ for toxic symptoms. The results further show that accumulation of nickel in all the tissues of C. mrigala is higher than that of chromium. In addition, the metal accumulations of the binary mixtures of chromium and nickel are substantially higher than those of the individual metals, indicating synergistic interactions between the two metals. Theoretically the simplest explanation for an additive joint action of toxicants in a mixture is that they act in a qualitatively similar way. The observed data suggest that C. mrigala could be suitable monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Bioaccumulation of lead and the influence of chelating agents in Catla catla fingerlings

Lead is a widespread element and one of the persistent and cumulative pollutants of the environment. The present study deals with the bioaccumulation of lead and the influence of chelating agents, meso 2,3-dimercaptosuccinic acid (DMSA), D-Penicillamine and CaNa₂EDTA in reducing the concentration of lead on the selected organs of Catla catla fingerlings for both acute and chronic exposures by using ICP-AES. It is inferred from the present findings that there was a correlation between environmental conditions and the heavy metal contents of the fish. The highest concentration of lead is found in kidney tissues and the lowest in muscle tissues. The accumulation pattern of lead in the selected organs of Catla catla is: kidney > liver > gill > brain > muscle. Also, it has been found that the treatment of chelating agents, DMSA, D-Penicillamine and CaNa₂EDTA reduces the concentration of lead significantly for both acute and chronic exposures. The results also show that DMSA is the most effective chelator of lead in reducing the body burden of C. catla fingerlings. The observed data further indicate that C. catla could be suitable for monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

A Coupled Land-Surface and Dry Deposition Model and Comparison to Field Measurements of Surface Heat,Moisture, and Ozone Fluxes

We have developed a coupled land-surface and drydeposition model for realistic treatment of surface fluxes ofheat, moisture, and chemical dry deposition within acomprehensive air quality modelling system. A new land-surfacemodel (LSM) with explicit treatment of soil moisture andevapotranspiration and an indirect soil moisture nudging schemehas been added to a mesoscale meteorology model. The new drydeposition model uses the same aerodynamic and bulk stomatalresistances computed for evapotranspiration in the LSM. Thisprovides consistent land-surface and boundary layer propertiesacross the meteorological and chemical components of the system. The coupled dry deposition model also has the advantage of beingable to respond to changing soil moisture and vegetationconditions. Modelled surface fluxes of sensible and latent heatas well as ozone dry deposition velocities were compared to twofield experiments: a soybean field in Kentucky during summer 1995and a mixed forest in the Adirondacks of New York in July 1998.(on assignment to the National Exposure Research Laboratory, U.S. Environmental Protection Agency) (author for correspondence, e-mail(on assignment to the National Exposure Research Laboratory, U.S. Environmental Protection Agency)     

Sub-canopy deposition of ozone in a stand of cutleaf coneflower

Although there has been a great deal of research on ozone, interest in exposure of native, herbaceous species is relatively recent and it is still not clear what role the pollutant has in their ecological fitness. The ozone exposure of a plant is usually expressed in terms of the concentration above the canopy or as a time-weighted index. However, to understand the physiological effects of ozone it is necessary to quantify the ozone flux to individual leaves as they develop, which requires knowing the deposition velocity and concentration of the pollutant as a function of height throughout the plant canopy. We used a high-order closure model of sub-canopy turbulence to estimate ozone profiles in stands of cutleaf coneflower (Rudbeckia laciniata L.) located in the Great Smoky Mountains National Park, USA. The model was run for periods coinciding with a short field study, during which we measured vertical concentration profiles of ozone along with measurements of atmospheric turbulence and other meteorological and plant variables. Predictions of ozone profiles by the model are compared with observations throughout the canopy.     

Analysis of temperature influences on the amplitude-frequency characteristics of Rn gas concentration

The ventilation mechanism of Rn gas in underground environments is considered. Ventilation plays an important role in influencing the variability (harmonics) of Rn gas in the porous space below the earth's surface. We propose a new physical-environmental model of relating Rn gas concentrations to air temperature variations at the earth's surface. Applicability of this model was tested after searching for Rn gas indicators of geodynamic processes in two underground tunnels in central and southern Israel. The theoretical estimation of Rn gas concentrations shows a good agreement with the observed values. We demonstrate the possibility of Rn gas anomalies being caused by atmospheric temperature variations and the necessity to take these effects into account when investigating geodynamic processes.     

Evaluation and Improvement of a Dry Deposition Model using SO2 and O3 Measurements over a Mixed Forest

A dry deposition model (RDM) for operational application has beenevaluated and modified in the present study. Field measurements of friction velocity and dry deposition velocity of SO₂ andO₃ over a mixed forest have been used to evaluate RDM. It was found that RDM predicts friction velocities very close to measurements and thus it can predict reasonable aerodynamic resistance. RDM overestimated O₃ deposition during dry nighttime conditions and underestimated both O₃ andSO₂deposition for early morning hours. It could not predict the mean diurnal variation in deposition velocity for either O₃ or SO₂ deposition under wet surface conditions. Modifications have been made for O₃ and SO₂ dry deposition based on the comparison of results and based upon additional published data. Compared to an earlier version of RDM, the modified versionpredicts better results for O₃ and SO₂ dry deposition,especially under rain and dew conditions.     

Control of PCDD/PCDF emissions from refuse-derived fuel combustors

This paper presents preliminary results of performance tests conducted at the Mid-Connecticut Refuse-Derived Fuel Facility in February 1989. The objectives of these performance tests were to evaluate the effects of combustion and flue gas cleaning process conditions on air pollution emissions and residue properties.