Analysis of perfluorooctanoate (PFOA) and other perfluorinated compounds (PFCs) in the River Po watershed in N-Italy

C7-C11 perfluorinated carboxylates (PFACs) and perfluorooctansulfonate (PFOS) were analysed in selected stretches of the River Po and its major tributaries. Analyses were performed by solid-phase extraction (SPE) with Oasis HLB cartridges and methanol elution followed by LC-MS-MS detection using 13C-labelled internal standards. High concentration levels ( approximately 1.3 microg l(-1)) of perfluorooctanoate (PFOA) were detected in the Tánaro River close to the city Alessandria. After this tributary, levels between 60 and 337 ng l(-1) were measured in the Po River on several occasions. The PFOA concentration close to the river mouth in Ferrara was between 60 and 174 ng l(-1). Using the river discharge flow data in m3 s(-1) at this point (average approximately 920 m3 s(-1) for the year 2006), a mass load of approximately 0.3 kg PFOA per hour or approximately 2.6 tons per year discharged in the Adriatic Sea has been calculated. PFOS concentration levels in the Po River at Ferrara were approximately 10 ng l(-1).     

EU-wide survey of polar organic persistent pollutants in European river waters

This study provides the first EU-wide reconnaissance of the occurrence of polar organic persistent pollutants in European river waters. More than 100 individual water samples from over 100 European rivers from 27 European Countries were analysed for 35 selected compounds, comprising pharmaceuticals, pesticides, PFOS, PFOA, benzotriazoles, hormones, and endocrine disrupters. Around 40 laboratories participated in this sampling exercise. The most frequently and at the highest concentration levels detected compounds were benzotriazole, caffeine, carbamazepine, tolyltriazole, and nonylphenoxy acetic acid (NPE₁C). Only about 10% of the river water samples analysed could be classified as “very clean” in terms of chemical pollution. The rivers responsible for the major aqueous emissions of PFOS and PFOA from the European Continent could be identified. For the target compounds chosen, we are proposing “indicative warning levels” in surface waters, which are (for most compounds) close to the 90th percentile of all water samples analysed.     

The application of positive matrix factorization in the analysis, characterisation and detection of contaminated soils

Multivariate factor analytical techniques are widely used for the approximation, in terms of a linear combination of factors, of multivariate experimental data. The chemical composition of soil samples are multivariate in nature and provide datasets suitable for the application of these statistical techniques. Recent developments of multivariate factor analytical techniques have led to the approach of Positive Matrix Factorization (PMF), a weighted least squares fit of a data matrix in which the weights are determined depending on the error estimates of each individual data value. This approach relies on more physically significant assumptions than methods like Principal Components Analysis which is frequently used in the analysis of soil datasets. In this paper we apply PMF to characterise the pollutant source in a set of geographically referenced soil samples taken within a 200 m radius of a site characterised by a high concentration of heavy metals. Each sample has been analysed for major and minor elements (using wavelength-dispersive X-ray fluorescence spectrometry), carbon, hydrogen and nitrogen (using a CHN elemental analyzer) and mercury (using cold-vapour atomic absorption spectrometry). Analysis of the soils using PMF resulted in a successful partitioning of variances into sources related to background soil geochemistry, organic influences and those associated with the contamination. Combining these results with a geostatistical approach successfully demarcated the main source of the combined organic and heavy metal contamination.     

An expanded conceptual framework for solution-focused management of chemical pollution in European waters

Background

This paper describes a conceptual framework for solutions-focused management of chemical contaminants built on novel and systematic approaches for identifying, quantifying and reducing risks of these substances.

Methods

The conceptual framework was developed in interaction with stakeholders representing relevant authorities and organisations responsible for managing environmental quality of water bodies. Stakeholder needs were compiled via a survey and dialogue. The content of the conceptual framework was thereafter developed with inputs from relevant scientific disciplines.

Results

The conceptual framework consists of four access points: Chemicals, Environment, Abatement and Society, representing different aspects and approaches to engaging in the issue of chemical contamination of surface waters. It widens the scope for assessment and management of chemicals in comparison to a traditional (mostly) perchemical risk assessment approaches by including abatement- and societal approaches as optional solutions. The solution-focused approach implies an identification of abatement- and policy options upfront in the risk assessment process. The conceptual framework was designed for use in current and future chemical pollution assessments for the aquatic environment, including the specific challenges encountered in prioritising individual chemicals and mixtures, and is applicable for the development of approaches for safe chemical management in a broader sense. The four access points of the conceptual framework are interlinked by four key topics representing the main scientific challenges that need to be addressed, i.e.: identifying and prioritising hazardous chemicals at different scales; selecting relevant and efficient abatement options; providing regulatory support for chemicals management; predicting and prioritising future chemical risks. The conceptual framework aligns current challenges in the safe production and use of chemicals. The current state of knowledge and implementation of these challenges is described.

Conclusions

The use of the conceptual framework, and addressing the challenges, is intended to support: (1) forwarding sustainable use of chemicals, (2) identification of pollutants of priority concern for cost-effective management, (3) the selection of optimal abatement options and (4) the development and use of optimised legal and policy instruments.

     

Substance-related environmental monitoring strategies regarding soil, groundwater and surface water — an overview

Substance-related monitoring is an essential tool within environmental risk assessment processes. The soundness of policy decisions including risk management measures is often directly related to the reliability of the environmental monitoring programs. In addition, monitoring programs are required for identifying new and less-investigated pollutants of concern in different environmental media. Scientifically sound and feasible monitoring concepts strongly depend on the aim of the study. The proper definition of questions to be answered is thus of pivotal importance. Decisions on sample handling, storage and the analysis of the samples are important steps for the elaboration of problem-oriented monitoring strategies. The same applies to the selection of the sampling sites as being representative for scenarios to be investigated. These steps may become critical to handle for larger international monitoring programs and thus trigger the quality of their results. This study based on the work of an IUPAC (International Union of Pure and Applied Chemistry) task group addresses different kinds and approaches of substance-related monitoring of different compartments of soil, groundwater and surface water, and discusses their advantages and limitations. Further important aspects are the monitoring across policies and the monitoring data management using information systems.     

Estimation of soil adsorption coefficients of organic compounds by HPLC screening using the second generation of the European reference soil set

The European reference soil set was introduced as common basis for a better comparability of soil sorption data measured within the framework of chemical testing of environmental chemicals. The success of the EUROSOILS, as the set is commonly called, convinced the European Commission's Joint Research Centre to evaluate the possibility of producing a remake of these unique and new type of reference materials maintaining the principal sorption-controlling properties of the soils. In this paper the recently proposed second generation of the EUROSOILS is used to evaluate a HPLC-screening technique for the estimation of soil adsorption coefficients of organic chemicals. It could be shown that the derived correlations between HPLC capacity factors of the test substances and the respective soil adsorption coefficients resulting from batch experiments with the second version of the EUROSOILS agreed with those derived for the first generation of reference soils at a different occasion.     

Triazines in the aquatic systems of the Eastern Chinese Rivers Liao-He and Yangtse

The results of a one-year monitoring program on the two Eastern Chinese River systems, i.e. the Liao-He and the Yangtse, with special emphasis on the presence of triazine herbicides are presented. Sediment, suspended solids and water samples from both rivers were analyzed. Additionally, recovery experiments on the SPE-in-field-enrichment procedure and the extraction methods were performed. The samples were measured by gas chromatography coupled with mass spectrometry, electron capture detection and a newly developed mu-plasma atomic emission detector. A typical result of a one-year monitoring was obtained in case of the Liao-He: During winter, at low water period, low triazine values were found. A similar situation was found in early spring. Highest concentrations of atrazine up to 1600 ng/l were found in late spring in the water samples. Maximum concentrations of atrazine, simazine, propazine, simetryn and prometryn were observed in this season as a result of the actual use of triazines. Finally, after the high water period in autumn the triazine concentrations decreased. Additionally, atrazine adsorbed on sediment (up to 2.8 ng/g) and suspended solids was determined (up to 8 ng/l) during late spring sampling. Therefore, the logarithm of the organic carbon based sorption coefficient of atrazine could be calculated. Low levels of atrazine were measured in the water of Yangtse (up to 18.3 ng/l). The concentrations from all sampling points and sampling stations of a particular sampling date were similar, which indicates a homogeneous distribution of this herbicide. Due to the high discharge rate of up to 79,000 m3/s in case of the Yangtse a considerable mass transport of up to 57.5 kg per day atrazine may take place, even at concentrations below the European drinking water limit of 100 ng/l.     

Assessing drought-related ecological risk in the Florida Everglades

In the winter-spring of 2001, South Florida experienced one of the worst droughts in its recorded history. Out of a myriad of ecological concerns identified during this time, the potential for catastrophic peat fire and negative impacts to wading bird reproduction emerged as critical issues. Water managers attempted to strike a balance between the environment and protection of water supplies for agriculture and urban interests. It became evident, however, that a broad-scale, integrated way to portray and prioritise ecological stress was lacking in the Florida Everglades, despite this being considered a necessary tool for addressing issues of environmental protection. In order to provide a framework for evaluating various water management operations using real-time information, we developed GIS-based indices of peat-fire risk and wading bird habitat suitability. These indices, based on real physical, chemical, and biological data, describe two ecological conditions that help define the physical and biological integrity of the Everglades. In addition to providing continuous, updated assessments throughout the drought period, we incorporated predictive models of water levels to evaluate how various water management alternatives might exacerbate or alleviate ecological stress during this time.     

Europe-wide survey of estrogenicity in wastewater treatment plant effluents: the need for the effect-based monitoring

A pan-European monitoring campaign of the wastewater treatment plant (WWTP) effluents was conducted to obtain a concise picture on a broad range of pollutants including estrogenic compounds. Snapshot samples from 75 WWTP effluents were collected and analysed for concentrations of 150 polar organic and 20 inorganic compounds as well as estrogenicity using the MVLN reporter gene assay. The effect-based assessment determined estrogenicity in 27 of 75 samples tested with the concentrations ranging from 0.53 to 17.9 ng/L of 17-beta-estradiol equivalents (EEQ). Approximately one third of municipal WWTP effluents contained EEQ greater than 0.5 ng/L EEQ, which confirmed the importance of cities as the major contamination source. Beside municipal WWTPs, some treated industrial wastewaters also exhibited detectable EEQ, indicating the importance to investigate phytoestrogens released from plant processing factories. No steroid estrogens were detected in any of the samples by instrumental methods above their limits of quantification of 10 ng/L, and none of the other analysed classes of chemicals showed correlation with detected EEQs. The study demonstrates the need of effect-based monitoring to assess certain classes of contaminants such as estrogens, which are known to occur at low concentrations being of serious toxicological concern for aquatic biota.     

Coordinating links among research, standardisation and policy in support of water framework directive chemical monitoring requirements

The need for coordination among scientific and policy activities is an old debate in which respective communities have often tried to impose their views rather than reflecting on pragmatic solutions. In the last few years, however, constructive exchanges have taken place in the context of expert groups linked to the implementation of the Water Framework Directive (WFD) and related EU funded research projects, which have resulted in a better understanding of communication and knowledge transfer gaps. These exchanges concern not only the way research is being interfaced with water policies, but also how improved coordination could be organised regarding technical specifications linked to standardisation. This paper discusses on-going efforts to improve coordination among research, standardisation and policy in support of WFD implementation, with emphasis on chemical monitoring requirements.