Predicting Pressure Loss for Pulse Jet Filters

The analysis of pressure loss characteristics for pulse jet filters suggests that the relationship between dust adhesion to the fabric and the opposing force generated by pulse jet action plays a major role in dust removal. Hence, fabric cleanability is examined in terms of the adhesion-cohesion forces bonding the dust to the fabric vs. the intensity and frequency of the dust dislodgement forces produced by the high energy air pulses. The effect of jet size and location, jet air volume, and the intensity (pressure) and duration of the jet pulses is related to operating pressure loss.

The mechanics of energy transfer from the jet pulse to the dustladen fabric are explored in terms of jet pressure, solenoid valve action, the ratio of delivered pulse air volume to bag (tube) volume, and the elastic and flex properties of the felt bags. Effective and actual fabric dust holdings before and after cleaning are discussed with respect to steady-state dust deposition and removal rates, and operating pressure losses. Finally, predictive equations are proposed for estimating pressure loss over a broad range of design and operating parameters.     

Hematology and Some Biochemical Parameters of Wild Rodents in Pistachio Gardens of Kerman Province, Southeast Iran

Wild rodents were collected using live snap traps in pistachio gardens of Kerman Province, Southeast Iran from 2007 to 2009, then some physiological parameters of them were measured. The samples were identified as follow: Nesokia indica, Meriones persicus, Meriones lybicus and Tatera indica. Blood samples were obtained from the heart, then the blood parameters (glucose, cholesterol, triglyceride, total protein, HDL, red and white blood cell number) in wild species of rodents and laboratory rat were compared. The results showed that there were no significant differences in serum glucose, triglyceride, HDL and total protein levels among different experimental groups. The concentration of cholesterol in T. indica was more than that in N. indica (P < 0.01). The total numbers of red blood cells also showed significant difference between wild garden rodent species and laboratory rat (P < 0.01), while the numbers of white blood cells showed no significant difference.     

Evaluation of post-Katrina flooded soils for contaminants and toxicity to the soil invertebrates Eisenia fetida and Caenorhabditis elegans

This research evaluated soil samples from a New Orleans neighborhood in the Chalmette, Saint Bernard Parish, that had been inundated by flooding associated with Hurricane Katrina. The goal was to determine if ecological risks persisted from flood waters that had come in contact with hazardous surface chemicals before inundating this low-lying neighborhood for a prolonged period. Research objectives were to establish the presence or absence of volatile organic and heavy metal contaminants, and then asses the toxicity of this soil to Eisenia fetida in a soil exposure assay and Caenorhabditis elegans in a simulated porewater exposure assay. Soil analysis revealed detectable levels of metals and organics in the surface soil at each location. No contaminant was detected in concentrations above human health screening values. Chromium and mercury were detected at levels in excess of typical ecological risk values. Soil extracts revealed concentrations of nitrate, sulfate, and chloride above those from an unflooded background sample. Toxicity testing resulted in no acute effects to either test species, but did show bioaccumulation of arsenic, cadmium, and lead in E. fetida exposed to several samples. The combination of mercury and sulfate provide the potential for mercury methylation should flooding and prolonged inundation occur again.     

Demonstration of a high field electrostatically enhanced venturi scrubber on a magnesium furnace fume emission

A 566 m³/m (20,000 acfm) permanent installation demonstration system, consisting of the Air Pollution Systems' High Intensity Ionizer and a variable throat venturi scrubber (called the Scrub-E) has been installed on a magnesium recovery furnace. The furnace produces submicron fume particles of MgO, MgCl₂, and ZrCl₄. The system is designed to demonstrate the effectiveness of the High Intensity Ionizer versus high venturi pressure drop on the furnace emissions. The High Intensity Ionizer array operates stably at field strengths of 10–15 kV/cm and at velocities in excess of 18 m/sec (60 fps) while maintaining high charging efficiencies. The report covers the system design, technology, applications, and project developments. An Environmental Protection Agency proposed charged droplet Scrub-E is also discussed covering the design, technology, and proposed demonstration program.     

Objectives and status of fabric filter performance study

In October 1977, Southwestern Public Service Company executed a contract with the U.S. Environmental Protection Agency that called for a study to assess the performance of a fabric filter system installed on a large utility boiler that utilizes low sulfur Western coal. The project is now into its second year and the objectives of this paper are to describe the scope and intent of the study, as well as to report progress to date. In addition, some of the difficulties that we have encountered are discussed. Although some of these problems have resulted in procedural changes, the intent of the study has not been altered. This paper describes work being done in specific areas with which both the EPA and Southwestern are connected. These include fabric assessment, data collection, selection and installation of instrumentation, and overall fabric filter system performance. Results of the first performance test are also reviewed and the installation of a pilot baghouse is discussed.     

Beyond geomorphosites: trade-offs, optimization, and networking in heritage landscapes

This study uses Danxiashan, a world heritage site in Guangdong province, China, as a case study for planning a hypothetical geotourism network of heritage sites. This landscape has a multiplicity of values—its geoheritage cannot be separated from its ecological or cultural heritage. When designing a network of heritage sites for such a diversely valued landscape trade-offs must be made between differing and potentially conflicting objectives such as geotourism and geoconservation. To solve this multi-criteria decision problem, sites with potential value for people were designated as heritage sites, adapting the concept of geomorphosites—i.e., geomorphological heritage sites—to represent the intersection of anthropic values. In a GIS-based spatial decision support system heritage values for each site were weighted and ranked using the analytic hierarchy process and scenarios for alternative trail systems, and networks of tourism sites were generated by multi-criteria map overlay analysis and networking algorithms. The scenarios generated show how trade-offs can be made between oft-conflicting tourism and conservation objectives, how the design of parks can be optimized for multiple objectives, and how alternative design strategies can be explored. Such an approach could be used in scenario planning workshops to engage stakeholders in participatory design and consensus-based decision-making driven by geospatial science.     

The effect of multicomponent diffusion on NAPL dissolution from spherical ternary mixtures

This paper investigates the dissolution characteristics of ternary nonaqueous phase liquid (NAPL) mixtures with the goal of comparing the relative contributions of multicomponent (intra-NAPL) diffusion, film transfer and thermodynamic nonideality. These contributions are compared at the pore scale and intermediate scale (several centimeters downstream from the source). Trichloroethene (TCE), tetrachloroethene (PCE) and 1,1,1-trichloroethane (TCA) were selected to model a reasonably ideal mixture; TCE, PCE and octanol were selected as a relevant nonideal mixture. A multicomponent diffusion-based dissolution model incorporating hydrodynamic theory was formulated to estimate intra-NAPL concentration gradients and associated aqueous interfacial concentrations for ideally shaped (spherical) NAPL blobs. Pore scale dissolution times for this model were compared to those generated using the conventional well-mixed NAPL dissolution model, applying the same film transfer boundary condition in both cases. Activity coefficients (spatially and temporally variable for the diffusion model, temporally variable for the well-mixed model) were estimated using UNIFAC. NAPL interfacial concentration histories generated using the pore scale models were used as input in a three-dimensional groundwater transport model (MT3DMS) to compare downstream concentration distributions. For the relatively large NAPL bodies simulated (r=0.6 cm), intra-NAPL diffusion effects were found to be significant at the pore scale and were strongly impacted by the mixture's thermodynamic ideality. At the intermediate scale, and for the conditions tested, modest differences in the simulations suggested that intra-NAPL diffusion effects would be negligible compared to those associated with mixture composition uncertainty, dissolution rate processes related to NAPL-induced permeability effects and hydrodynamic issues associated with flow field heterogeneity.     

Long-term studies on the effects of nonvolatile organic compounds on porous media surface areas

This paper investigates the long-term behavior of porous media contaminated by nonvolatile organic compounds (NVOC) in terms of specific interfacial surface area. Specifically, a natural sand, Moffett sand (MS), was contaminated with naphthalene and the surface area was measured repeatedly over time using nitrogen adsorption-desorption techniques. A field-contaminated sand affected by lamp-black material (LB) from former manufactured gas plant operations was also studied. Lampblack is a carbonaceous skeleton containing polycyclic aromatic hydrocarbons (PAHs) and other hydrocarbons. It is hypothesized that soils contaminated by these types of chemicals will exhibit significantly less surface area than their clean counterparts. The surface areas for the contaminated MS samples increased toward their clean-MS values during the 700-h aging period, but achieved the clean values only after pentane extraction or heating at 60 degrees C. Heating at 50 degrees C failed to achieve a similar recovery of the clean-MS surface area value. Nonspecific mass loss tracked the increase in surface area as indirect evidence that naphthalene loss was the cause of the surface area increase. For the LB samples, aging at 100 degrees C produced a slight decrease in surface area and mass while aging at 250 degrees C caused the surface area to increase roughly threefold while the mass decreased by approximately 1%. These results suggest that, under moderate heating and over the time scale of this investigation, there is a redistribution of the complex contaminant mixture on the solid matrix. Greater temperatures remove mass more efficiently and therefore exhibited the surface area increase expected in this experiment.     

Social Approval of the Community Assessment Model for Odor Dispersal: Results from a Citizen Survey

Odors emitted from US Midwest hog production facilities present farmers, residents, and state regulatory agencies with a set of complex challenges. To predict odor exposure from multiple swine production sources simultaneously, and to determine siting recommendations for proposed new or enlarged hog facilities, researchers at Iowa State University designed the community assessment model for odor dispersion (CAM). A three-county citizen survey conducted in Iowa examined the level of hypothetical social acceptance of the modeling process, and level of trust in CAM results. While 69 % of respondents approved of modeling as a way to determine the most socially appropriate location for production sites, only 35 % would trust the results if potential odor exposure from a new facility were proposed to be built near their home. We analyzed approval of the CAM model, and level of trust, across a number of demographic, attitudinal, and belief factors regarding environmental quality and the hog industry. Overall, trust in CAM was uneven and varied across respondents. Those residents who would not trust CAM tended to be more concerned with environmental quality and less inclined to believe that the hog industry is critically important economically. Those who would not trust CAM results also had significantly more direct experience with odors. Findings point to predominantly positive, yet equivocal acceptance of CAM results among the citizenry, which is not unexpected given conflict typical of siting decisions in industry and waste disposal arenas. Recommendations are offered regarding the interaction of trust, beliefs and attitudes and the utility of CAM.     

Investigation of irradiated soil byproducts

The high dose irradiation of windblown soil deposited onto the surface of spent nuclear fuel is of concern to long-term fuel storage stability. Such soils could be exposed to radiation fields as great as 1.08 x 10(-3) C/kg-s (15,000 R/hr) during the 40-year anticipated period of interim dry storage prior to placement at the proposed national repository. The total absorbed dose in these cases could be as high as 5 x 10(7) Gy (5 x 10(9) rads). This investigation evaluated the potential generation of explosive or combustible irradiation byproducts during this irradiation. It focuses on the production of radiolytic byproducts generated within the pore water of surrogate clays that are consistent with those found on the Idaho National Engineering and Environmental Laboratory. Synthesized surrogates of localized soils containing combinations of clay, water, and aluminum samples, enclosed within a stainless steel vessel were irradiated and the quantities of the byproducts generated measured. Two types of clays, varying primarily in the presence of iron oxide, were investigated. Two treatment levels of irradiation and a control were investigated. An 18-Mev linear accelerator was used to irradiate samples. The first irradiation level provided an absorbed dose of 3.9 x 10(5)+/-1.4 x 10(5)Gy (3.9 x 10(7)+/-1.4 x 10(7) rads) in a 3-h period. At the second irradiation level, 4.8 x 10(5)+/-2.0 x 10(5)Gy (4.8 x 10(7)+/-2.0 x 10(7) rads) were delivered in a 6-h period. When averaged over all treatment parameters, irradiated clay samples with and without iron (III) oxide (moisture content = 40%) had a production rate of hydrogen gas that was a strong function of radiation-dose. A g-value of 5.61 x 10(-9)+/-1.56 x 10(-9) mol/J (0.054+/-0.015 molecules/100-eV) per mass of pore water was observed in the clay samples without iron (III) oxide for hydrogen gas production. A g-value of 1.07 x 10(-8)+/-2.91 x 10(-9) mol/J (0.103+0.028 molecules/100-eV) per mass of pore water was observed in the iron (III) oxide containing clay samples for hydrogen gas production. This value was noticeably larger when the samples were spiked with both KCl and KNO3 salts. The ratio of oxygen to nitrogen gas was observed to increase as a function of absorbed dose particularly in the presence of both KCl and KNO3 salts. The creation of radiolytic byproducts produced an observable but small increase in headspace pressure. Temperature increases during irradiation were not observed. Additionally, KCl and KNO3 salts added to the clays enhanced nitrite production as a function of radiation-dose and the type of clay considered. The addition of aluminum to these samples had no statistically discernable impact at the alpha = 0.05 level. Generation of the irradiation products, hydrogen peroxide and hydrogen gas also depended upon the type of clay irradiated and the presence of both KCl and KNO3 salts and the total dose received.