Emergence of nano silica for oil and gas well cementing: application,challenges, and future scope

Environmental Science and Pollution Research - Nanotechnology has opened up a plethora of opportunities and has acquired extreme importance in a myriad of fields to produce enhanced materials....     

Comparative performance of flat sheet and spiral wound modules in the nanofiltration of reactive dye solution

Background and purpose

Besides the opportunities for reuse, stringent regulations and growing public awareness demand an enhanced quality of effluent from dye industries. Treatment of an aqueous solution of dye (reactive red 198) was carried out in a nanofiltration unit using both flat sheet and spiral wound modules to obtain a comparative performance evaluation in terms of permeate flux and quality.

Methods

Hydrophilized polyamide membrane with molecular weight cutoff of 150 was used for the experiments. Effects of trans-membrane pressure (TMP), feed concentration and addition of salt on permeate flux were investigated. Percent reduction of color, chemical oxygen demand (COD), total dissolved solid (TDS), and conductivity were determined to assess performance of the membrane.

Results

The maximum flux decline was 16.1% of its initial value at 490 kPa TMP with 50 ppm feed concentration in spiral wound module, whereas the same in flat sheet under same conditions was 7.2%. The effect of TMP showed a quasi-linear increase in flux with increasing pressure. Increased permeate concentration led to the reduction in observed retention of dye in the membrane. The average reduction in color, COD, and TDS were 96.88%, 97.38%, and 89.24%, respectively. The decline in permeate flux was more in case of spiral wound module compared to flat sheet. However, spiral wound module performed better in terms of color removal, COD reduction, and TDS removal.

Conclusion

Substantial removal of color was achieved in the nanofiltration experiments with a marked reduction in COD and TDS. The process allowed the production of permeate stream with great reutilization possibilities.     

Prevalence of multidrug-resistant,coagulase-positive Staphylococcus aureus in nasal carriage,food, wastewater and paper currency in Jalandhar city (north-western), an Indian state of Punjab

Eighteen sites impacted by abandoned mine drainage (AMD) in Pennsylvania were sampled and measured for pH, acidity, alkalinity, metal ions, and sulfate. This study compared the accuracy of four acidity calculation methods with measured hot peroxide acidity and identified the most accurate calculation method for each site as a function of pH and sulfate concentration. Method E1 was the sum of proton and acidity based on total metal concentrations; method E2 added alkalinity; method E3 also accounted for aluminum speciation and temperature effects; and method E4 accounted for sulfate speciation. To evaluate errors between measured and predicted acidity, the Nash-Sutcliffe efficiency (NSE), the coefficient of determination (R ²), and the root mean square error to standard deviation ratio (RSR) methods were applied. The error evaluation results show that E1, E2, E3, and E4 sites were most accurate at 0, 9, 4, and 5 of the sites, respectively. Sites where E2 was most accurate had pH greater than 4.0 and less than 400 mg/L of sulfate. Sites where E3 was most accurate had pH greater than 4.0 and sulfate greater than 400 mg/L with two exceptions. Sites where E4 was most accurate had pH less than 4.0 and more than 400 mg/L sulfate with one exception. The results indicate that acidity in AMD-affected streams can be accurately predicted by using pH, alkalinity, sulfate, Fe(II), Mn(II), and Al(III) concentrations in one or more of the identified equations, and that the appropriate equation for prediction can be selected based on pH and sulfate concentration.     

Cesium migration in saturated silica sand and Hanford sediments as impacted by ionic strength

Large amounts of 137Cs have been accidentally released to the subsurface from the Hanford nuclear site in the state of Washington, USA. The cesium-containing liquids varied in ionic strengths, and often had high electrolyte contents, mainly in the form of NaNO3 and NaOH, reaching concentrations up to several moles per liter. In this study, we investigated the effect of ionic strengths on Cs migration through two types of porous media: silica sand and Hanford sediments. Cesium sorption and transport was studied in 1, 10, 100, and 1000 mM NaCl electrolyte solutions at pH 10. Sorption isotherms were constructed from batch equilibrium experiments and the batch-derived sorption parameters were compared with column breakthrough curves. Column transport experiments were analyzed with a two-site equilibrium-nonequilibrium model. Cesium sorption to the silica sand in batch experiments showed a linear sorption isotherm for all ionic strengths, which matched well with the results from the column experiments at 100 and 1000 mM ionic strength; however, the column experiments at 1 and 10 mM ionic strength indicated a nonlinear sorption behavior of Cs to the silica sand. Transport through silica sand occurred under one-site sorption and equilibrium conditions. Cesium sorption to Hanford sediments in both batch and column experiments was best described with a nonlinear Freundlich isotherm. The column experiments indicated that Cs transport in Hanford sediments occurred under two-site equilibrium and nonequilibrium sorption. The effect of ionic strength on Cs transport was much more pronounced in Hanford sediments than in silica sands. Effective retardation factors of Cs during transport through Hanford sediments were reduced by a factor of 10 when the ionic strength increased from 100 to 1000 mM; for silica sand, the effective retardation was reduced by a factor of 10 when ionic strength increased from 1 to 1000 mM. A two order of magnitude change in ionic strength was needed in the silica sand to observe the same change in Cs retardation as in Hanford sediments.     

Wastewater-based epidemiology: a new frontier for tracking environmental persistence and community transmission of COVID-19

Environmental Science and Pollution Research - Recent research in many parts of the world has pointed towards evidence of SARS-CoV-2 RNA in both treated and raw municipal wastewater discharged by...     

Links among nitrification, nitrifier communities, and edaphic properties in contrasting soils receiving dairy slurry

Soil biotic and abiotic factors strongly influence nitrogen (N) availability and increases in nitrification rates associated with the application of manure. In this study, we examine the effects of edaphic properties and a dairy (Bos taurus) slurry amendment on N availability, nitrification rates and nitrifier communities. Soils of variable texture and clay mineralogy were collected from six USDA-ARS research sites and incubated for 28 d with and without dairy slurry applied at a rate of ~300 kg N ha(-1). Periodically, subsamples were removed for analyses of 2 M KCl extractable N and nitrification potential, as well as gene copy numbers of ammonia-oxidizing bacteria (AOB) and archaea (AOA). Spearman coefficients for nitrification potentials and AOB copy number were positively correlated with total soil C, total soil N, cation exchange capacity, and clay mineralogy in treatments with and without slurry application. Our data show that the quantity and type of clay minerals present in a soil affect nitrifier populations, nitrification rates, and the release of inorganic N. Nitrogen mineralization, nitrification potentials, and edaphic properties were positively correlated with AOB gene copy numbers. On average, AOA gene copy numbers were an order of magnitude lower than those of AOB across the six soils and did not increase with slurry application. Our research suggests that the two nitrifier communities overlap but have different optimum environmental conditions for growth and activity that are partly determined by the interaction of manure-derived ammonium with soil properties.     

A review on comparative study of Savonius wind turbine rotor performance parameters

One approach for reducing the level of environmental contamination threats around the world is to use renewable energy-harvesting equipment. Wind is a potential environmental resource that has become a desirable aspect of urban use due to advances in wind turbine design technology. Other variants have been developed based on the classic vertical-axis Savonius rotor model, which, according to experimental test findings and computational calculations, show higher operational characteristics performance. Generated power and shaft torque operational results are obtained by providing specific rotor blade shapes in these models, one of the most common designs, among small-scale rotor which uses a drag-based vertical axis whereas Savonius turbines having large-scale rotors not developed yet. This kind of rotor has the advantages of being simple to design, affordable, performing well at low speeds, and turns to flow direction independently. However, it was discovered that the Savonius rotor suffers through high quantity of negative torques created by the returning blade after a number of examinations into its performance. Many studies on various rotor types have been conducted to resolve the Savonius turbine’s performance constraints. The research showed and analyzed the difficulties and modification in design parameters of rotor, as well as their major impact on rotor performance.

     

Biodegradation of chlorinated organic pesticides endosulfan and chlorpyrifos in soil extract broth using fungi

The present study was designed to screen 20 fungi for their potential to degrade the chlorinated organic pesticides endosulfan and chlorpyrifos. Fungi were first screened for their tolerance to various concentrations of target pesticides using soil extract agar and subsequent degradation studies were performed in soil extract broth containing 25 mg/L of the individual pesticide. Pesticide degradation was evaluated using gas chromatography. Other parameters, such as pH and mycelial weight, were also determined. Based on percent growth inhibition of test fungi and subsequent analysis of EC₅₀ values, the overall results revealed that chlorpyrifos showed significantly more growth inhibition in all tested fungi compared with endosulfan. Trametes hirsuta showed complete degradation of both α‐ and β‐endosulfan isomers and Cladosporium cladosporioides displayed maximum degradation of chlorpyrifos. All test fungi degraded endosulfan more efficiently than chlorpyrifos, except Phanerochaete chrysosporium, Trichoderma harzianum, and Trichoderma virens which showed higher degradation of chlorpyrifos than endosulfan. It was also found that all tested fungi degraded α‐endosulfan more efficiently than β‐endosulfan. Endosulfan sulfate was found to be the major degradation product with all tested fungi. Fungi which showed more endosulfan degradation also produced more endosulfan sulfate. However, less endosulfan sulfate was detected with T. hirsuta and Trametes versicolor, although they degraded endosulfan more efficiently.     

Probiotics for dietary management of non-alcoholic fatty liver disease

Environmental Chemistry Letters - Non-alcoholic fatty liver disease (NAFLD) is characterized by an increase in fat content of liver cells, which is independent from alcohol intake. Here, we review...     

Emission study of a diesel engine fueled with higher alcohol-biodiesel blended fuels

This work examines the effect of butanol (higher alcohol) on the emission pattern of neat neem oil biodiesel (NBD100) fueled diesel engine. Single-cylinder, 4-stroke, research diesel engine was employed to conduct the trial. Blends comprising the mixture of biodiesel and higher alcohol were prepared by employing an ultrasonic agitator. Four test fuels such as neat neem oil biodiesel, diesel, and two blends of higher alcohol/neem oil biodiesel: 10% and 20% (by volume). Experimental result showed that increasing alcohol content to biodiesel brought down the various emissions such as Smoke, NO_x, HC, and CO by 6.8%, 10.4%, 8.6%, and 5.9%, respectively, at all loads. It was also concluded from the trail that a 20% higher alcohol/neem oil biodiesel blends show the promising signs in reducing all the emissions associated with biodiesel fuelled diesel engine.