An occupational exposure assessment of polychlorinated dibenzo-p-dioxin and dibenzofurans in firefighters

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are unintentional byproducts of combustion and industrial processes. Firefighters face the risk of occupational exposure to PCDD/Fs. Congener-specific analyses of 17 PCDD/Fs were performed on 20 serum samples collected from firefighters and fire scene investigators, and four soot samples that had deposited on the surfaces of the fire helmets and were collected after the firefighters had fought fires. The PCDD/F concentrations on the helmets that were contaminated by being worn at the fire scenes were 63-285 times higher than those on a clean helmet. The median serum PCDD/F concentration of the 16 firefighters (12 pg WHO₂₀₀₅-TEQ g⁻¹ lipid) was not different from those of the males from the general Taiwanese population (9.4 pg WHO₂₀₀₅-TEQ g⁻¹ lipid). However, the median PCDD/F level in the four fire scene investigators (15 pg WHO₂₀₀₅-TEQ g⁻¹ lipid) was higher than those in the male from the general Taiwanese population (Mann-Whitney U test, p < 0.01). Furthermore, the serum samples from the firefighters and fire scene investigators, and the soot samples from the fire scenes presented similarly distinctive PCDD/F profiles that had elevated proportions for 10 PCDF congeners. Limited data indicated that the fire scene investigators were occupationally exposed to PCDD/Fs at the fire scenes. We suggested that the firefighters were not occupationally exposed to PCDD/Fs at the fire scenes due to appropriate protection. However, the fire scene investigators may have had more occupational exposure to PCDD/Fs due to poor protection, and further research must be performed to confirm this.     

A batch study on the bio-fixation of carbon dioxide in the absorbed solution from a chemical wet scrubber by hot spring and marine algae

Carbon dioxide mass transfer is a key factor in cultivating micro-algae except for the light limitation of photosynthesis. It is a novel idea to enhance mass transfer with the cyclic procedure of absorbing CO(2) with a high performance alkaline abosorber such as a packed tower and regenerating the alkaline solution with algal photosynthesis. Hence, the algae with high affinity for alkaline condition must be purified. In this study, a hot spring alga (HSA) was purified from an alkaline hot spring (pH 9.3, 62 degrees C) in Taiwan and grows well over pH 11.5 and 50 degrees C. For performance of HSA, CO(2) removal efficiencies in the packed tower increase about 5-fold in a suitable growth condition compared to that without adding any potassium hydroxide. But ammonia solution was not a good choice for this system with regard to carbon dioxide removal efficiency because of its toxicity on HSA. In addition, HSA also exhibits a high growth rate under the controlled pHs from 7 to 11. Besides, a well mass balance of carbon and nitrogen made sure that less other byproducts formed in the procedure of carboxylation. For analysis of some metals in HSA, such as Mg, Mn, Fe, Zn, related to the photosynthesis increased by a rising cultivated pH and revealed that those metals might be accumulated under alkaline conditions but the growth rate was still limited by the ratio of bicarbonate (useful carbon source) and carbonate. Meanwhile, Nannochlopsis oculta (NAO) was also tested under different additional carbon sources. The results revealed that solutions of sodium/potassium carbonate are better carbon sources than ammonia carbonate/bicarbonate for the growth of NAO. However, pH 9.6 of growth limitation based on sodium was lower than one of HSA. The integrated system is, therefore, more feasible to treat CO(2) in the flue gases using the algae with higher alkaline affinity such as HSA in small volume bioreactors.     

Profiles of PAH emission from steel and iron industries

In order to characterize the polycyclic aromatic hydrocarbons (PAHs) emission from steel and iron industries, this study measured the stack emission of twelve steel and iron plants in southern Taiwan to construct a set of source fingerprints. The study sampled the emissions by the USEPA's sampling method 5 with the modification of Graseby for the gas and particulate phase PAH and, then, used Hewlett-Packard 5890 gas chromatograph equipped with mass spectrometer detector to analyze the samples. The steel and iron industries are classified into three categories on the basis of auxiliary energy source: Category I uses coal as fuel, Category II uses heavy oil as fuel and Category III uses electric arc furnace. The pollution source profiles are obtained by averaging the ratios of individual PAH concentrations to the total concentration of 21 PAHs and total particulate matter measured in this study. Results of the study show that low molecular weight PAHs are predominant in gas plus particulate phase for all three categories. For particulate phase PAHs, however, the contribution of large molecular weight compounds increases. Two-ring PAHs account for the majority of the mass, varying from 84% to 92% with an average of 89%. The mass fractions of 3-, 4-, 5-, 6-ring PAHs in Category I are found to be more than those of the other two categories. The mass of Category III is dominated by 7-ring PAHs. Large (or heavy) molecular weight PAHs (HMW PAHs) are carcinogenic. Over all categories, these compounds are less than 1% of the total-PAH mass on the average. The indicatory PAHs are benz[a]anthracene, benzo[k]fluoranthene, benzo[ghi]perylene for Category I, benzo[a]pyrene, acenaphthene, acenaphthylene for Category II and coronene, pyrene, benzo[b]chrycene for Category III. The indicatory PAHs among categories are very different. Thus, dividing steel and iron industry into categories by auxiliary fuel is to increase the precision of estimation by a receptor model. Average total-PAH emission factors for coal, heavy oil and electric arc furnace were 4050 μg/kg-coal, 5750 μg/l-oil, 2620 μg/kW h, respectively. Carcinogenic benzo[a]pyrene for gas plus particulate phase was 2.0 g/kg-coal, 2.4 μg/l-oil and 1.4 μg/kW h for Category I, II and III, respectively.     

Effects of dissolved inorganic carbon and nutrient levels on carbon fixation and properties of Thermosynechococcus sp. in a continuous system

The concept of CO₂ chemo-absorption by sodium hydroxide in a wet scrubber followed by microalgae cultivation was used as a means to reduce the major greenhouse gas. A thermophilic and alkaline tolerable cyanobacterium named Thermosynechococcus CL-1 (TCL-1) was cultivated in continuous system, with a carbonate-bicarbonate buffer as carbon source. The effects of dissolved inorganic carbon (DIC_in) and nutrient levels in influent on cell mass productivity, DIC removal efficiency, and alkaline solution regeneration by TCL-1 were investigated. The results show the highest cell mass productivity reaches 1.7 g L⁻¹ d⁻¹ under the highest DIC and nutrients level. Conversely, the best regeneration of alkaline solution proceeds from pH 9.5 to 11.3 under the lowest level. In addition, the highest ΔDIC (DIC consumption) and DIC removal efficiency are 42 mM and 43% at 113.2 and 57 mM DIC_in, respectively.     

Spatiotemporal distribution of arsineic species of oysters (Crassostrea gigas) in the coastal area of southwestern Taiwan

This study investigated total arsenic (As) and As species contents of oysters (Crassostrea gigas) in different production areas, seasons and sea locations on the southwestern coast of Taiwan. Analytical results indicate that contents of total As, arsenite, arsenate, dimethylarsinic acid, monomethylarsonic acid and arsenobetaine in oysters are 9.90 ± 3.68, 0.091 ± 0.104, 0.033 ± 0.038, 0.529 ± 0.284, 0.037 ± 0.046 and 3.94 ± 1.33 mg/g (dry wt), respectively. A ratio of inorganic As concentrations to total As concentrations is 1.26%. Total As contents of oysters cultured in the outer sea are statistically significantly lower than those of oysters cultured in the inner sea. The total As contents of oysters is the highest in Putai, where the blackfoot disease prevails. The low As contents in oysters is attributed to the low temperature in winter, which slows the metabolism of oysters. A maximum value is 33.37 μg/g (dry) in Putai in spring, because a considerable amount of aquacultural waste water with high As contents is discharged into adjacent drainage channels and rivers there during that season.     

Oyster shell reduces PAHs and particulate matter from incense burning

This is the first report showing reduction of particle matter and PAHs from incense burning by addition of oyster shell. Worshiping ancestors and gods by burning incense sticks and joss paper is a very important tradition in many Asian regions. More than 45 % of families in Taiwan burn incense twice a day. Unlike joss paper burning, most of the incense burning occurs indoors, thus creating a risk for human health. Previous reports have indeed evidenced toxicity of incense, notably due to particulate matter and polycyclic aromatic hydrocarbons (PAHs). However, there are few methods to reduce particle matter and PAHs from incense burning. We hypothesize that oyster shell may be used to reduce incense fumes toxicity. Indeed a large amount of unused oyster shell is discarded due to increasing seafood consumption. Here, two types of incense were made in the laboratory, and then 5–30 % of oyster shells were added to the incense to study the reduction of particle matter and PAHs. Results show that reduction of particle matter and PAH emission increased with oyster shell addition. The reduction of emission factors is ?35 % for mean particle matter, ?21 % for particle-phase PAHs, and ?37 % for benzo[a]pyrene equivalent concentration (BaP_eq), using 30 % oyster shell additive. The addition of 10 % oyster shell reduces the burning time by 8.3 min, increases the burning rate by 3.4 mg/min, and reduces particle matter by 6.4 mg/g incense, particle-phase PAHs by 0.67 μg/g incense, and BaP_eq by 0.23 μg/g incense. The reductions of particle matter, particle-phase PAHs, and BaP_eq correspond to about 640 metric tons, 67, and 23 kg, respectively, per year. Our findings will help to produce safer and cleaner incense.     

Integrating the AHP and TOPSIS decision processes for evaluating the optimal collection strategy in reverse logistic for the TPI

This study presents processes to evaluate the optimal collecting strategy (CS) in reverse logistic (RL) for the downstream part of the Taiwan photovoltaic industry (TPI). It combines the analytic hierarchy process (AHP) with the technique for ordering preference by similarity to the ideal solution (TOPSIS). The criteria and sub-criteria were initially established to assess the related benefits, opportunities, costs, and risks (BOCR). AHP was then used to obtain the weightings of the criteria and sub-criteria and TOPSIS was used to rank the optimal collection strategy in terms of its overall evaluation criteria. The AHP and TOPSIS method provides decision makers with a valuable reference for assessing the optimal collection strategy of TPI downstream. The results of the study should provide decision makers in the downstream TPI with academic support and valuable guidance for evaluating their collection program and obtain optimal strategies for administering RL practices.     

Absorption kinetics of NO from simulated flue gas using Fe(II)EDTA solutions

The absorption of NO encountering flue gases in aqueous solutions of Fe(II)EDTA was determined using a semi-batch stirred tank with a plane gas–liquid interface at 50 °C. The concentrations of NO, SO₂ and O₂ in the feeding stream were 300–800 ppm, 500–2200 ppm and 0–20%, respectively. The pH value of the Fe(II)EDTA solutions varied from 3 to 11. The concentrations of Fe(II)EDTA were maintained between 0.01 and 0.05 M. Experiments were performed to evaluate the effect of operating parameters on the NO absorption rate, the reaction kinetics of the reactants in gas and liquid phases, and the effect of competition between various reactants on the mass transfer rate in the NO removal system. Results indicate that the average reaction rate constant is 3.70 × 10⁷ M⁻¹ s⁻¹. Adding NaOH does not increase the absorption capability of Fe(II)EDTA. The presence of O₂ decreases the NO absorption rate with Fe(II)EDTA. The absorption rate of NO with Fe(II)EDTA decreases at low concentrations of SO₂, but increases at high concentrations.     

A MIXING MODEL FOR A SEPARATED MECHANICAL AERATION SYSTEM1

ABSTRACT: An input-output method, using a network of ideal continuous stirred-tank and plug-flow tublar reactors, is adopted to analyze residence time distribution data for a separated mechanical aeration system. The usefulness of this modeling concept is enhanced by its simplicity, especially in the presence of a first-order reaction. This facilitates use of the model format for wastewater quality prediction. Moreover, first-order rate constants can also be estimated from the model, if conversions due to the reaction rate are available.     

Degradation of azo dyes using low iron concentration of Fenton and Fenton-like system

This study investigated Fenton and Fenton-like reactions at low iron concentration (相似文献