Ultrasonographic features in a case of heterozygous achondroplasia at 25 weeks' gestation

Prenatal diagnosis of heterozygous achondroplasia at 25 weeks is described. First-level fetal ultrasonography demonstrated short long bones of the lower limbs. Second-level examination showed a large head; shortened femur, fibula, and tibia; a ‘trident’-shaped hand; and an abnormal facial profile.     

An experimental apparatus for testing biodiesels based on a CFR engine—setup and validation with different methyl ester blends

A cooperative fuel research (CFR) engine was modified and instrumented in order to control operating conditions and to measure engine parameters and in-cylinder pressure diagrams. Aiming at the comparison of different alternative fuels, an experimental procedure was defined, including cetane number (CN) evaluation and the definition of engine operating quantities in different working points, for fixed levels of compression ratio (CR) and injection advance. An investigation was made considering several blends of methyl-esters of rapeseed oil (RME) and of a mix of vegetable oils (VOME) with conventional diesel oil. The defined experimental procedure was applied to assess CN, engine brake thermal efficiency (bte) and exhaust emissions. Results show that the biodiesel content has a positive influence on soot emissions, with strong reduction, while thermal efficiency and NO_X emissions are negatively affected, which can be justified taking into account fuel properties and changes in combustion process. As observed outcomes are generally in line with those presented in literature, the facility proved to be a suitable tool for basic investigations on alternative fuels to be used in specific applications.     

Hydrocarbon emission fingerprints from contemporary vehicle/engine technologies with conventional and new fuels

The present paper presents results from the analysis of 29 individual C₂–C₉ hydrocarbons (HCs) specified in the European Commission Ozone Directive. The 29 HCs are measured in exhaust from common, contemporary vehicle/engine/fuel technologies for which very little or no data is available in the literature. The obtained HC emission fingerprints are compared with fingerprints deriving from technologies that are being phased out in Europe. Based on the total of 138 emission tests, thirteen type-specific fingerprints are extracted (Mean ± SD percentage contributions from individual HCs to the total mass of the 29 HCs), essential for receptor modelling source apportionment. The different types represent exhaust from Euro3 and Euro4 light-duty (LD) diesel and petrol-vehicles, Euro3 heavy-duty (HD) diesel exhaust, and exhaust from 2-stroke preEuro, Euro1 and Euro2 mopeds. The fuels comprise liquefied petroleum gas, petrol/ethanol blends (0–85% ethanol), and mineral diesel in various blends (0–100%) with fatty acid methyl esters, rapeseed methyl esters palm oil methyl esters, soybean oil methyl or sunflower oil methyl esters. Type-specific tracer compounds (markers) are identified for the various vehicle/engine/fuel technologies.An important finding is an insignificant effect on the HC fingerprints of varying the test driving cycle, indicating that combining HC fingerprints from different emission studies for receptor modelling purposes would be a robust approach.The obtained results are discussed in the context of atmospheric ozone formation and health implications from emissions (mg km^?1 for LD and mopeds and mg kW h^?1 for HD, all normalised to fuel consumption: mg dm^?3 fuel) of the harmful HCs, benzene and 1,3-butadiene.Another important finding is a strong linear correlation of the regulated “total” hydrocarbon emissions (tot-HC) with the ozone formation potential of the 29 HCs (ΣPO₃ = (1.66 ± 0.04) × tot-RH; r² = 0.93). Tot-HC is routinely monitored in emission control laboratories, whereas C₂–C₉ are not. The revealed strong correlations broadens the usability of data from vehicle emission control laboratories and facilitates the comparison of the ozone formation potential of HCs in exhaust from of old and new vehicle/engine/fuel technologies.     

The dark side of socialization: How and when divestiture socialization undermines newcomer outcomes

This research examines the potential downsides of divestiture socialization. We theorize that supervisor behaviors and attitudes—that is, support for authenticity and creativity expectations—moderate the different stages of a model in which newcomers' authentic self‐expression mediates the negative effect of divestiture socialization on newcomer task performance, creativity, social integration, and job satisfaction. Specifically, supervisor support for authenticity allows newcomers to express their authentic self when faced with divestiture processes, and perceived supervisor creativity expectations enable them to deploy their authentic self‐expressions to enhance their creativity. A time‐lagged, multisource study of 142 newcomer—supervisor dyads provides support for these predictions, offering notable implications for theory and practice.     

The effects of heavy metal contamination on the soil arthropod community of a shooting range

Soils in clay pigeon shooting ranges can be seriously contaminated by heavy metals. The pellets contained in ammunition are composed of Pb, Sb, Ni, Zn, Mn and Cu. The total concentrations of these metals in soils, and the effects of their increasing levels on the arthropod community were investigated at seven sampling sites in a clay pigeon shooting range and compared with two controls. Research revealed that the spatial distribution of Pb and Sb contamination in the shot-fall area was strongly correlated with the flight path of the pellets. Ordination obtained through Redundance Analysis showed that Collembola, Protura and Diplura were positively correlated with major detected contaminants (Pb, Sb), while Symphyla showed a negative correlation with these pollutants. Determination of the soluble lead fraction in soil, and of its bioaccumulation in the saprophagous Armadillidium sordidum (Isopoda) and the predator Ocypus olens (Coleoptera), showed that a significant portion of metallic Pb from spent pellets is bioavailable in the soil and can be bioaccumulated by edaphic organisms, entering the soil trophic network, but without biomagnification.     

Higher sorption of arsenate versus arsenite on amorphous Al-oxide, effect of ligands

Arsenic pollution is currently a major health issue because As is toxic for human beings, animals, and plants. Knowledge of As mobility is therefore important to assess health risk. The sorption of arsenite and arsenate on metal oxides in the presence of various anionic ligands is closely linked to the mobility, bioavailability, and risk. It was reported that the sorption mechanisms and characteristics of arsenite and arsenate on Al-oxides were different from that on Fe-oxides. Previous work reports the sorption of arsenite and arsenate on Fe-oxides in the presence of ligands. Whereas there is few knowledge on the sorption of arsenite and arsenate by Al-oxides in the presence of ligands. Here, we studied the sorption of arsenite and arsenate on amorphous Al-oxide by batch experiments. We tested the effect of organic ligands: oxalate, malate, tartrate, citrate; and inorganic ligands: sulfate, phosphate, selenate, selenite. Results show that amorphous Al-oxide has more sorption affinity for arsenate than arsenite. The inhibition of As sorption by ligands at pH 6 is higher for arsenite than arsenate. For arsenite, the As sorption inhibition decreases in the order phosphate, citrate, malate, selenite, oxalate, tartrate, sulfate, and selenate. For arsenate, the As sorption inhibition decreases in the order phosphate, malate, citrate, selenite, tartrate, oxalate, sulfate, and selenate.     

Spatial–temporal variability of epibenthic assemblages on subtidal biogenic reefs in the northern Adriatic Sea

Spatial distribution and temporal variation of epibenthic assemblages of coralligenous biogenic rocky outcrops occurring in the northern Adriatic Sea (45°04′–45°24′N; 12°23′–12°43′E) were investigated by photographic sampling from 2003 to 2006 at 12 randomly selected sites. The dominant reef-forming organisms were the encrusting calcareous algae (Lithophyllum stictaeforme, Lithothamnion minervae and Peyssonnelia polymorpha), while the main bioeroders were boring sponges (Cliona viridis, C. celata, C. thoosina, C. rhodensis, Piona vastifica) and the bivalve Gastrochaena dubia. Composition of the assemblages varied thorough years and among sites. Spatial heterogeneity, at local and regional scale, prevailed over temporal variation. This variability was related both to the geo-morphological features of the outcrops and to environmental variables. Sites clearly differed in the percent cover of reef builder and bioeroder species while only limited temporal variation within site was found. Some taxa revealed complex intra-site temporal trends. These results provide valuable information on the diversity and variability of epibenthic assemblages of the northern Adriatic coralligenous reefs, essential for the management and conservation of these unique biogenic habitats.     

The methane sink associated to soils of natural and agricultural ecosystems in Italy

In the present work, the CH4 sink associated to Italian soils was calculated by using a process-based model controlled by gas diffusivity and microbial activity, which was run by using a raster-based geographical information system. Georeferenced data included land cover CLC2000, soil properties from the European Soil Database, climatic data from the MARS-STAT database, plus several derived soils properties based on published algorithms applied to the above mentioned databases. Overall CH4 consumption from natural and agricultural sources accounted for a total of 43.3 Gg CH4 yr(-1), with 28.1 Gg CH4 yr(-1) removed in natural ecosystems and 15.1 Gg CH4 yr(-1) in agricultural ecosystems. The highest CH4 uptake rates were obtained for natural areas of Southern Apennines and islands of Sardinia and Sicily, and were mainly associated to areas covered by sclerophyllous vegetation (259.7+/-30.2 mg CH4 m(-2) yr(-1)) and broad-leaved forest (237.5 mg CH4 m(-2) yr(-1)). In terms of total sink strength broad-leaved forests were the dominant ecosystem. The overall contribution of each ecosystem type to the whole CH4 sink depended on the total area covered by the specific ecosystem and on its exact geographic distribution. The latter determines the type of climate present in the area and the dominant soil type, both factors which showed to have a strong influence on CH4 uptake rates. The aggregated CH4 sink, calculated for natural ecosystems present in the Italian region, is significantly higher than previously reported estimates, which were extrapolated from fluxes measured in other temperate ecosystems.     

Photodegradation of pentachlorophenol catalyzed by semiconductor particles

The heterogeneous photocatalytic degradation of pentachlorophenol (PCP) in aqueous solutions containing a suspension of TiO₂ leads to the quantitative formation of CO₂ and HC1. The photodegradation has also been studied in other semiconductor dispersions such as ZnO, CdS, WO₃, and SnO₂. TiO₂ appears the most efficient. Oxygen and water are essential ingredients in the complete mineralization of this pollutant found near pulp and paper industries. Experiments with sunlight show a promising route for the water treatment processes; the half life of PCP (initial concentration 4.5 × 10^?5M) is about 8 minutes, in the presence of 2 g/l of TiO₂.