Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

Palm oil mill effluent treatment and CO<Subscript>2</Subscript> sequestration by using microalgae—sustainable strategies for environmental protection

In this era of globalization, various products and technologies are being developed by the industries. While resources and energy are utilized from processes, wastes are being excreted through water streams, air, and ground. Without realizing it, environmental pollutions increase as the country develops. Effective technology is desired to create green factories that are able to overcome these issues. Wastewater is classified as the water coming from domestic or industrial sources. Wastewater treatment includes physical, chemical, and biological treatment processes. Aerobic and anaerobic processes are utilized in biological treatment approach. However, the current biological approaches emit greenhouse gases (GHGs), methane, and carbon dioxide that contribute to global warming. Microalgae can be the alternative to treating wastewater as it is able to consume nutrients from wastewater loading and fix CO₂ as it undergoes photosynthesis. The utilization of microalgae in the system will directly reduce GHG emissions with low operating cost within a short period of time. The aim of this review is to discuss the uses of native microalgae species in palm oil mill effluent (POME) and flue gas remediation. In addition, the discussion on the optimal microalgae cultivation parameter selection is included as this is significant for effective microalgae-based treatment operations.     

Microwave irradiation and citric acid assisted seed germination and phytoextraction of nickel (Ni) by <Emphasis Type="Italic">Brassica napus</Emphasis> L.: morpho-physiological and biochemical alterations under Ni stress

The complex bio-geochemistry of soil allows pollutant to persist for a longer period of time which further decreased the fertility and natural composition of land. Nickel, an inorganic pollutant, coming from a wide range of industrial and manufacturing units possesses serious threat to soil degradation and crop productivity around the world. The present study was carried to evaluate the combined role of microwave irradiation (MR) and citric acid (CA) on the phytoextraction potential of Brassica napus L. under Ni stress. An initial seed germination test was conducted to select effective time scale of MR exposure. Highest seed germination was observed at exposure of 2.45 GHz frequency for 30 s. Healthy seeds of B. napus L. genotype Faisal Canola (RBN-03060) treated with MR at 2.45 GHz for 30 s were sown in plastic pots filled with 5 kg of soil. Nickel and CA applied exogenously in solution form with different combinations to both MR-treated and untreated B. napus plants. The MR-treated plants showed higher growth, biomass, photosynthetic pigments (Chl a, b, total, and carotenoids) and activities of antioxidant enzymes (SOD, POD, APX, CAT) as compared to untreated plants who showed higher reactive oxygen species (MDA, H₂O₂) and electrolyte leakage. Increasing Ni concentration significantly decreased the physiological and biochemical attributes of B. napus both in MR-treated and untreated plants. The addition of CA alleviated Ni-induced toxic effects in both MR-treated and untreated plants by improving antioxidant defense system. The degree of Ni stress mitigation was higher in MR-treated plants. The Ni concentration was higher in root, stem, and leaves of MR-treated plants under CA application as compared to untreated plants. The present study concluded that seeds treated with MR before sowing showed higher accumulation and concentration of Ni from soil, and this phenomenon boosted with the application of CA.     

Accumulation of endocrine disrupting chemicals (EDCs) in the polychaete Paraprionospio sp. from the Yodo River mouth,Osaka Bay,Japan

This study presents the levels of endocrine disrupting chemicals (EDCs) accumulated by Paraprionospio sp. from the Yodo River mouth, Osaka Bay. Since high concentrations of nonylphenol (NP), bisphenol A (BP), octylphenol (OP), 17β-estradiol (E2), and estrone (E1) have been measured in sediment from Osaka Bay, some bioaccumulation could be expected particularly in benthic animals. EDCs were analysed in Paraprionospio sp., a dominant benthic species in Osaka Bay. The results showed that Paraprionospio sp. had accumulated varying concentrations (wet weight; w.w.) of NP at 1,460–4,410 ng/g; BP at 22.5–39.6 ng/g; OP at 18.9–45.4 ng/g; E2 at 0.89–4.35 ng/g; and E1 at 0.06–2.50 ng/g. Accumulation of NP and OP were highest among the samples gathered in summer (July 2008), while concentrations of BP, E2, and E1 did not much differs within 3 years. EDC levels in Paraprionospio sp. were apparently greater than those in sediments showing bioaccumulation.     

Anti-oviposition activities of used sock media against a dengue vector: prospects of eco-friendly control and solutions to pollution

Yearly, huge amounts of sock refuse are discarded into the environment. Socks contain many molecules, and worn ones, which are rich in smell-causing bacteria, have a strong influence on animals’ behaviors. But the impacts of sock odor on the oviposition behavior of dengue vectors are unknown. We assessed whether Aedes albopictus changes its oviposition activity in response to the presence of used socks extract (USEx) in potential breeding grounds, using choice and no-choice bioassays (NCB). When furnished even chances to oviposit in two sites holding USEx and two others containing water (control), Ae. albopictus deposited significantly less eggs in USEx than in water sites. A similar pattern of oviposition preference was also observed when there were more oviposition options in water. When there were greater oviposition opportunities in USEx sites, Ae. albopictus oviposited preferentially in water. Females laid significantly more eggs during the NCB involving water than USEx. Also, significantly more mature eggs were retained by females in the NCB with USEx than in that with water. These observations strongly suggest the presence of molecules with either repellent or deterrent activities against Ae. albopictus females and provide an impetus to advocate the integration of used socks in dengue control programs. Such applications could be a realistic end-of-life recourse to reroute this waste from landfills.

     

Influence of polymethyl acrylate additive on the formation of particulate matter and NOX emission of a biodiesel–diesel-fueled engine

Environmental Science and Pollution Research - The aim of this study is to investigate the effect of the polymethyl acrylate (PMA) additive on the formation of particulate matter (PM) and nitrogen...     

The effect of nutrients shortage on plant’s efficiency to capture solar radiations under semi-arid environments

Radiation use efficiency (RUE) is considered critical for calculation of crop yield. The crop productivity can be improved by increasing the interception of solar radiation and maintaining higher RUE for plants. Irrigation water and nitrogen (N) supply are the main limiting factors for RUE in maize (Zea mays L.) across the semi-arid environments. Field experiments were conducted during two consecutive growing seasons (2009–2010) to optimize RUE in relation to N application timings and rates with varying irrigation water management practices. In experiment 1, three N application timings were made, while in experiment 2, three possible water management practices were used. In both experiments, five N rates (100, 150, 200, 250, and 300 kg N ha⁻¹) were applied to evaluate the effects of irrigation water and N on cumulative photosynthetic active radiation (PARi), dry matter RUE (RUE_DM), and grain yield RUE (RUE_GY). The results demonstrated that cumulative PARi and RUEs were not constant during the plant growth under varying the nutrients. The water and N significantly influenced cumulative PARi and RUEs during the both growing seasons. In experiment 1, the maximum cumulative PARi was observed by application of 250 kg N ha⁻¹ in three splits (1/3 N at V2, 1/3 N at V16, and 1/3 N at R1 stage), and the highest RUE_DM was achieved by the application of 300 kg N ha⁻¹. However, the highest RUE_GY was observed by application of 250 kg N ha⁻¹. In experiment 2, the maximum cumulative PARi was attained at normal irrigation regime with 250 kg N ha⁻¹, while the highest RUE_DM and RUE_GY were recorded at normal irrigation regime with the application of 300 kg N ha⁻¹. The regression analysis showed significant and positive correlation of RUE_GY with grain yield. Therefore, optimum water and N doses are important for attaining higher RUE, which may enhance maize grain yield semi-arid environment; this may be considered in formulating good agricultural practices for the environmental conditions resembling to those of this study.

     

The potentials of internalising social banking among the Malaysian Islamic banks

Islamic banking has established for the last 40 years, yet only recently researchers acknowledge social failures of Islamic banking and finance. This has led to a proposition of forming new forms of banking and non-banking institutions that include social banking. It is argued that in considering the developmentalist needs of the Muslim societies in Malaysia, there is a need to go back to fundamentals of Islamic finance in realising the aspirational Islamic moral economy that emphasises on the social good, capacity development at the individual and social levels. This paper aims to explore the concept of social banking and search for the possibilities for internalisation in Malaysian Islamic banking. To gain understanding on this pertinent issue, an empirical investigation was conducted at 17 Islamic banks in Malaysia. A mixed method was employed. For the primary data collection, 477 respondents of Islamic banks clients and employees participated in a self-administrated survey, and 11 respondents from the executive and managerial level of eight Islamic banks involved in a semi-structured interview survey. The integrated analysis implies that Islamic banking significantly contributes to socio-economic development. On the contrary, financial and economic practices in everyday life do not reflect the social economic justice. The result further illustrates that the Islamic banks lack social contributions as they prone to practice efficiency-oriented institutions. Hence, a social banking model is needed to solve the lack of socio-economic development issue in the current practice of Islamic bank.     

Investigation on the effect of sintering temperature on kaolin hollow fibre membrane for dye filtration

Despite its extraordinary price, ceramic membrane can still be able to surpass polymeric membrane in the applications that require high temperature and pressure conditions, as well as harsh chemical environment. In order to alleviate the high cost of ceramic material that still becomes one of the major factors that contributes to the high production cost of ceramic membrane, various attempts have been made to use low cost ceramic materials as alternatives to well-known expensive ceramic materials such as alumina, silica, and zirconia in the fabrication of ceramic membrane. Thus, local Malaysian kaolin has been chosen as the ceramic material in this study for the preparation of kaolin hollow fibre membrane since it is inexpensive and naturally abundant in Malaysia. Due to the fact that the sintering process plays a prominent role in obtaining the desired morphology, properties, and performances of prepared ceramic membrane, the aim of this work was to study the effect of different sintering temperatures applied (ranging from 1200 to 1500 °C) in the preparation of kaolin hollow fibre membrane via dry/wet phase inversion-based spinning technique and sintering process. The morphology and properties of membrane were then characterised by SEM, AFM, FTIR, XRD, and three-point bending test, while the performances of membrane were investigated by conducting water permeation and Reactive Black 5 (RB5) dye rejection tests. From the experimental results obtained, the sintering temperature of 1400 °C could be selected as the optimum sintering temperature in preparing the kaolin hollow fibre membrane with the dense sponge-like structure of separation layer that resulted in the good mechanical strength of 70 MPa with the appreciable water permeation of 75 L/h m² bar and RB5 rejection of 68%.