Determination of nickel in blood and serum samples of oropharyngeal cancer patients consumed smokeless tobacco products by cloud point extraction coupled with flame atomic absorption spectrometry

Oropharyngeal cancer is a significant public health issue in the world. The incidence of oropharyngeal cancer has been increased among people who have habit of chewing smokeless tobacco (SLT) in Pakistan. The aim of present study was to evaluate the concentration of nickel (Ni) in biological samples (whole blood, serum) of oral (n?=?95) and pharyngeal (n?=?84) male cancer patients. For comparison purposes, the biological samples of healthy age-matched referents (n?=?150), who consumed and did not consumed SLT products, were also analyzed for Ni levels. As the Ni level is very low in biological samples, a preconcentration procedure has been developed, prior to analysis of analyte by flame atomic absorption spectrometry (FAAS). The Ni in acid-digested biological samples was complexed with ammonium pyrrolidinedithio carbamate (APDC), and a resulted complex was extracted in a surfactant Triton X-114. Acidic ethanol was added to the surfactant-rich phase prior to its analysis by FAAS. The chemical variables, such as pH, amounts of reagents (APDC, Triton X-114), temperature, incubation time, and sample volume were optimized. The resulted data indicated that concentration of Ni was higher in blood and serum samples of cancer patients as compared to that of referents who have or have not consumed different SLT products (p?=?0.012–0.001). It was also observed that healthy referents who consumed SLT products have two to threefold higher levels of Ni in both biological samples as compared to those who were not chewing SLT products (p? Figure

?     

Chrysin attenuates estradiol-induced endometrial hyperplasia in rats via enhancing PPARα activity

Environmental Science and Pollution Research - Endometrial hyperplasia (EH) is a complex condition that commonly affects women after menopause. Since the current available treatments for EH are...     

Metal uptake capability of <Emphasis Type="Italic">Cyperus articulatus</Emphasis> L. and its role in mitigating heavy metals from contaminated wetlands

Wetland plants are biological filters that play an important role in maintaining aquatic ecosystem and can take up toxic metals from sediments and water. The present study investigated the seasonal variation in the accumulation potential of heavy metals by Cyperus articulatus in contaminated watercourses. Forty quadrats, distributed equally in 8 sites (six contaminated sites along Ismailia canal and two uncontaminated sites along the River Nile), were selected seasonally for sediment, water, and plant investigations. Autumn was the flourishing season of C. articulatus with the highest shoot density, length, and diameter as well as aboveground biomass, while summer showed the least growth performance. The photosynthetic pigments were markedly reduced under contamination stress. C. articulatus plants accumulated concentrations of most heavy metals, except Pb, in their roots higher than the shoots. The plant tissues accumulated the highest concentrations of Fe, Cd, Ni, and Zn during autumn, while Cu and Mn during spring, and Cr and Co during winter. It was found that Cd, Cu, Ni, Zn, Pb, and Co had seasonal bioaccumulation factor (BF) > 1 with the highest BF for Cd, Ni, and Zn during autumn, Co, Cu, and Pb in winter, spring, and summer, respectively. The translocation factor of most heavy metals, except Pb in spring, was <1 indicating potential phytostabilization of these metals. In conclusion, autumn is an ideal season for harvesting C. articulatus in order to monitor pollution in contaminated wetlands.     

Life-Cycle Impact Assessment of oil drilling mud system in Algerian arid area

The objective of this work is to assess the environmental impacts of the drilling mud system in Algeria's arid region. Water-based mud (WBM) and oil-based mud (OBM) are used during well drilling in Hassi Messaoud petroleum field, and have a considerable pollution potential particularly on the aquifer system which constitutes the single resource of drinking water in the Sahara. The Life-Cycle Assessment (LCA) approach is applied to evaluate the impacts of several drilling mud systems across all stages of their life cycle, e.g. use, treatment and disposal. Environmental impacts of five treatments scenarios corresponding to the drilling waste management applied in Hassi Messaoud are compared: reserve pit without treatment (burial option), secondary high centrifugation (vertical cuttings dryer), stabilisation/solidification online, stabilisation/solidification off line and thermal desorption. The impact assessment is carried on using the LCIA models of Impact 2002+ method in SIMAPRO7 software. This assessment identifies human toxicity and terrestrial eco-toxicity as the major impact categories in this specific arid context and quantifies the emissions contributions. The local environmental impact is the most important of the drilling mud life cycle and is mainly linked to emissions from reserve pits, treated cuttings, and drilling phase 16″ through the Turonian and Albian aquifer. The main contributing substances are aromatic hydrocarbons fraction and metals in particular barium, zinc, antimony, arsenic, and aluminium. Concerning the comparison of the treatment scenarios, it appears that stabilisation/solidification online is the best one; it has the lowest impact score in the two dominating categories because of the waste minimisation: mud storage avoided in the reserve pit. The second best scenario is the thermal desorption which obtains the lowest impact score in carcinogen effects due to hydrocarbons reduction (<1%) and avoided impacts of recovered oil. The toxic substances fate modeling will be improved by taking into account their site-specific impact.     

Trends in atmospheric particulate matter in Dhaka,Bangladesh, and the vicinity

Environmental Science and Pollution Research - Dhaka and its neighboring areas suffer from severe air pollution, especially during dry season (November–April). We investigated temporal and...     

Photocatalytic oxidation of the textile dye basic red 18 with irradiated titanium dioxide

One of the major problems of textile wastewater is the presence of dye materials, because colour is visible to the public even if the dye concentration is lower than other pollutants, and needs therefore to be removed from the wastewater before it is discharged. Techniques based on “advanced oxidative processes” such as photocatalysed oxidation seem to be very promising for industrial wastewater treatment, especially for decolourization of textile effluents. In this work, we describe the photocatalytic degradation of the textile dye Basic Red 18 (BR 18) in aqueous solution using two different types of TiO₂ as photocatalyst: Degussa P25 (80% anatase) and Framitalia (100% anatase). Photooxidation of BR 18 was followed by HPLC analysis, and kinetic parameters were evaluated in order to optimise the treatment procedure. The results obtained in this work showed that the colour became virtually zero and the chemical oxygen demand (COD) is strongly reduced at the end of the treatment. The obtained results are compared with the efficiency of decolourization using the H₂O₂/UV System. Finally, marine mussel test was used to evaluate the efficiency of photocatalytic oxidation with TiO₂ in terms of ecotoxicity. A significant reduction of cumulative mortality was observed for the treated effluent.     

Effect of the Pretreatment with UV and Gamma Radiations on the Modification of Plywood Surface by Photocuring with Epoxy Acrylate

In order to further improve the physical properties of plywood surface that was pretreated with UV and Gamma radiation at different radiation intensities before photocuring. After pretreatment with radiation the plywood surface was coated with different prepared formulations containing epoxyacrylate (EA-1020) as an oligomer, difunctional monomers such as tripropylene glycol diacrylate (TPGDA), 2-hexadioldiacrylate (HDDA), Ethylene Glycol dimethacrylate (EGDMA) and trifunctional monomer trimethyl propen triacrylate (TMPTA) with photoinitiator Darocur 1664. Thin polymer films were prepared on glass plate with these formulated solutions and cured under UV radiation. Pendulum hardness (PH) and gel content of the film were studied for selecting the formulations as top coat and as base coat. The polished plywood surface was coated with selected formulation and cured under UV radiation. Various rheological properties of UV cured plywood surface such as pendulum hardness, scratch hardness, microgloss, adhesion strength, percentage chipped off area and abrasion resistance were studied.     

An effective dietary survey framework for the assessment of total dietary arsenic intake in Bangladesh: Part-A—FFQ design

Groundwater contaminated with arsenic (As), when extensively used for irrigation, causes potentially long term detrimental effects to the landscape. Such contamination can also directly affect human health when irrigated crops are primarily used for human consumption. Therefore, a large number of humans are potentially at risk worldwide due to daily As exposure. Numerous previous studies have been severely limited by small sample sizes which are not reliably extrapolated to large populations or landscapes. Human As exposure and risk assessment are no longer simple assessments limited to a few food samples from a small area. The focus of more recent studies has been to perform risk assessment at the landscape level involving the use of biomarkers to identify and quantify appropriate health problems and large surveys of human dietary patterns, supported by analytical testing of food, to quantify exposure. This approach generates large amounts of data from a wide variety of sources and geographic information system (GIS) techniques have been used widely to integrate the various spatial, demographic, social, field, and laboratory measured datasets. With the current worldwide shift in emphasis from qualitative to quantitative risk assessment, it is likely that future research efforts will be directed towards the integration of GIS, statistics, chemistry, and other dynamic models within a common platform to quantify human health risk at the landscape level. In this paper we review the present and likely future trends of human As exposure and GIS application in risk assessment at the landscape level.