Profiles of enzymatic activity in earthworms from zinc, lead and cadmium polluted areas near Olkusz (Poland)

The aim of the study was to determine whether there are signs of adaptation of soil fauna to a gradient of heavy metal contamination. Earthworms Aporrectodea caliginosa, Lumbricus terrestris and Eisenia fetida were collected during the spring and summer of 2000 and 2001 from meadow sites situated between 2 and 32 km from the Bukowno-Olkusz complex of zinc-lead ore mines and smelters. The heavy metal content in the soil near smelters reaches 10,500 mg/kg (d.w.) for Zn, 2600 mg/kg for Pb and 81.9 mg/kg for Cd. The sites differ with respect to species composition of earthworm community, with A. caliginosa being dominant. Complete data was obtained only for A. caliginosa, since other species were not abundant at all investigated sites during the whole period of investigation. The body burdens of Zn, Pb, Cd and Cu in A. caliginosa reached 1500, 100, 220 and 10 microg/g, respectively, in the vicinity of the smelter (2-4 km), and decreased to 400, 2, 36 and 6 microg/g at the most distant site (32 km). Cadmium and lead content was significantly elevated in the whole body of L. terrestris collected at the site 2.5 km distant from the smelters when compared to more distant sites, while in E. fetida only the body burden of cadmium was elevated at the nearest site compared to the next site of transect. Activities of glutathione peroxidase (GPX; EC 1.11.1.9) against hydrogen peroxide (H2O2) or cumene hydroperoxide (cumOOH), glutathione reductase (GR; EC 1.6.4.2), glutathione S-transferase (GST; EC 2.5.1.18) and catalase (CAT; EC 1.11.1.6) were assayed in postmitochondrial supernatant obtained from whole body homogenates. Seasonal and annual variations of enzyme activity were reflected by higher GPX activity in the late summer of 2001 in comparison with the spring and summer of 2000. This may reflect severe drought in the spring and summer of 2000. The activity of both GPX isozymes, GR and GST in A. caliginosa and L. terrestris increased with increasing distance from the smelters and reached maximum at sites III and IV (4 and 8 km from the smelters, respectively) and then it decreased in the animals from site V (32 km). These may be the effects of antagonism between the enzyme inducing and enzyme inhibiting action of smelter emissions, a phenomenon known as a hormetic effect. It is postulated here that this effect is of diagnostic value for metal pollution biomonitoring.     

Comparison of dioxin and furan TEQ determination in contaminated soil using chemical,micro-EROD,and immunoassay analysis

High resolution mass spectrometry gas chromatography (GC/MS) is the standard method for dioxin and furan analysis in environmental matrices. Considered as very accurate, this method is however time consuming and expensive. Methods based on biological interactions have the necessary sensitivity but began only recently to be investigated in the context of environmental applications. We have compared dioxin and furan toxicity levels (expressed as toxic equivalent quantities (TEQs)) in soil samples by three analytical approaches: the micro-ethoxyresorufin-o-deethylase (EROD) bioassay (a receptor-based method), an immunoassay (antibody-based method) and GC/MS analysis (used as a reference) using a shortened extraction-purification method. Both biological methods were sensitive to interferences from compounds co-extracted from samples. Most samples were underestimated by the immunoassay and, at a greater extent, overestimated by the EROD bioassay. The average accuracy of TEQ estimation (86 +/- 45% of values established by GC/MS) and the absence of false-negatives showed by the immunoassay suggest the usefulness of this method for semi-quantitative, preliminary characterization of potentially contaminated sites.     

Explosions of carbon black and propane hybrid mixtures

Explosions of hybrid mixtures, i.e. mixtures containing more than one combustible phase, are not well understood. Most studies in this area involve mixtures of common dusts and gases, such as coal and methane, or polyethylene and ethylene. The present work focuses on explosions of carbon black particles, i.e. almost pure carbon with a very low content of volatiles: this makes the process of explosion less intense. However, addition of some quantities of combustible gases (here: propane) may sustain combustion processes. Another important issue is the fact that the carbon black particles are smaller in size than most dusts encountered in the process industry. The experiments were carried out in a 20-L explosion vessel and the analysis of the results focuses on the maximum explosion pressures and the maximum rates of pressure rise as a function of carbon black and propane concentrations. In addition, some samples of unburnt dust were collected and analysed with a scanning electron microscope and with thermo-gravimetric analysis.     

Analysis of mechanics of side impact test defined in UN/ECE Regulation 129

Objective: This article discusses differences between a side impact procedure described in United Nations/Economic Commission for Europe (UN/ECE) Regulation 129 and scenarios observed in real-world cases.

Methods: Numerical simulations of side impact tests utilizing different boundary conditions are used to compare the severity of the Regulation 129 test and the other tests with different kinematics of child restraint systems (CRSs). In the simulations, the authors use a validated finite element (FE) model of real-world CRSs together with a fully deformable numerical model of the Q3 anthropomorphic test device (ATD) by Humanetics Innovative Solution, Inc.

Results: The comparison of 5 selected cases is based on the head injury criterion (HIC) index. Numerical investigations reveal that the presence of oblique velocity components or the way in which the CRS is mounted to the test bench seat fixture is among the significant factors influencing ATD kinematics. The results of analyses show that the side impact test procedure is very sensitive to these parameters. A side impact setup defined in Regulation 129 may minimize the effects of the impact.

Conclusions: It is demonstrated that an artificial anchorage in the Regulation 129 test does not account for a rotation of the CRS, which should appear in the case of a realistic anchorage. Therefore, the adopted procedure generates the smallest HIC value, which is at the level of the far-side impact scenario where there are no obstacles. It is also shown that the presence of nonlateral acceleration components challenges the quality of a CRS and its headrest much more than a pure lateral setup.     

Interlaboratory comparisons in EMF survey measurements

This article presents methods and results of interlaboratory comparison in the electromagnetic field (EMF) survey measurements performed by Electromagnetic Environment Protection Laboratory. Based on the results, the author analyzed factors affecting the precision of EMF measurements, in particular—difficult to estimate—the “human factor”. In practice, the human factor has never been taken into account in the EMF measurements accuracy estimations budget, and the author estimate the importance of this factor that may include even up to half of the total uncertainty of measurements. Taking into account all factors depredating the accuracy of measurements, the uncertainty of the survey EMF measurements was estimated at the level of 2–4 dB.     

Use of the landfill water pollution index (LWPI) for groundwater quality assessment near the landfill sites

The purpose of the paper is to assess the groundwater quality near the landfill sites using landfill water pollution index (LWPI). In order to investigate the scale of groundwater contamination, three landfills (E, H and S) in different stages of their operation were taken into analysis. Samples of groundwater in the vicinity of studied landfills were collected four times each year in the period from 2004 to 2014. A total of over 300 groundwater samples were analysed for pH, EC, PAH, TOC, Cr, Hg, Zn, Pb, Cd, Cu, as required by the UE legal acts for landfill monitoring system. The calculated values of the LWPI allowed the quantification of the overall water quality near the landfill sites. The obtained results indicated that the most negative impact on groundwater quality is observed near the old Landfill H. Improper location of piezometer at the Landfill S favoured infiltration of run-off from road pavement into the soil-water environment. Deep deposition of the groundwater level at Landfill S area reduced the landfill impact on the water quality. Conducted analyses revealed that the LWPI can be used for evaluation of water pollution near a landfill, for assessment of the variability of water pollution with time and for comparison of water quality from different piezometers, landfills or time periods. The applied WQI (Water Quality Index) can also be an important information tool for landfill policy makers and the public about the groundwater pollution threat from landfill.     

Potential of solar domestic hot water systems in rural areas for greenhouse gas emission reduction in Poland

Application of solar energy for preparing domestic hot water is one of the easiest methods of utilization of this energy. At least part of the needs for warm tap water could be covered by solar systems. At present, mainly coal is used for water heating at dwellings in rural areas in Poland. Warm tap water consumption will increase significantly in the future as standards of living are improved. This can result in the growth of electricity use and an increase in primary fuel consumption. Present and future methods of warm sanitary water generation in rural areas in Poland is discussed, and associated greenhouse gas (GHG) emissions are estimated. It is predicted that the emission of CO₂ and NOx will increase. The emission of CO and CH₄ will decrease because of changes in the structure of the final energy carriers used. The economic and market potentials of solar energy for preparing warm water in rural areas are discussed. It is estimated that solar systems can meet 30%–45% of the energy demand for warm water generation in rural areas at a reasonable cost, with a corresponding CO₂ emission reduction. The rate of realization of the economic potential of solar water heaters depends on subsidies for the installation of equipment.

     

Social and ecological correlates of long-distance pant hoot calls in male chimpanzees

Long-distance calls have a variety of functions in different animal species. However, where multiple functions are proposed for a single long-distance call type, little is known about their relative importance. Chimpanzees are one species where several functions have been proposed for their long-distance call, the pant hoot. In this study, we investigated the effect of social factors, including the rank of the caller, party size, fission–fusion rates, and the presence of estrus females as well as ecological factors including the type of food consumed and travel time, on male chimpanzee (Pan troglodytes schweinfurthii) pant hooting, in order to identify the key correlates of this behavior. The wild male chimpanzees of the Kanyawara community, Uganda, produced more pant hoots on days when there were frequent changes in the male, but not female, composition of the focal’s party. This factor accounted for the largest amount of variation in pant hoot production, and we found that males were more likely to repeat a call prior to rather than after fusion with other males, suggesting that the calls facilitate fusion. Pant hoots therefore seem to play a pivotal role in regulating grouping dynamics in chimpanzees. Our study also shows that pant hooting was positively correlated with the rank of the caller, the presence of parous females in estrus, and the consumption of high-quality food, suggesting that pant hoots signal social status or social bonds when between-male competition is high. This study supports the view that pant hoots fulfill a complex social function.     

Application of a tri-capital community resilience framework for assessing the social–ecological system sustainability of community-based forest management in the Philippines

This study proposes and empirically tests a framework that integrates the concepts of community resilience and social–ecological system (SES) resilience through community forestry case studies. The framework provides a possible approach for assessing community resilience based on the development and allocation of socio-cultural, economic, and natural capital of individual households within a given forest community. Furthermore, aspects of SES resilience and system dynamics are used to define the potential state thresholds of community resilience. This exploratory attempt to quantify community resilience, using the proposed framework, aims to advance understanding of the conceptual overlaps of SES and community resilience as applied to forestry management. We consider community forestry groups as SES examples in which the community is an important stakeholder in managing natural forest capital. We selected pioneer communities under the community-based forest management (CBFM) Program in the Philippines as our case studies. We found that, on average, CBFM group members demonstrated moderate levels of resilience according to their acquired levels of capital. Although economic capital remained the weakest capital, the CBFM program had a positive effect in increasing the socio-cultural and natural capital of an entire community.