Screening analysis of volatile organic contaminants in commercial inorganic coagulants used for drinking water treatment

A method for quality screening is suggested to detect volatile impurities in inorganic coagulants that are used for drinking water treatment. Static headspace gas chromatography with mass spectrometry detection (HS–GCMS) is sensitive and selective to detect volatiles in low concentrations. This study has discovered that volatile organic impurities are detectable in ferric and aluminium-based coagulants which are used for drinking water treatment. For ferric chloride, 2-propanol was detected at a level of 17–24 μg ml⁻¹, acetone at 0.7–1.7 μg ml⁻¹, 1,1,1-trichloroacetone at 0.02–0.04 μg ml⁻¹, trichloromethane at 0.01–0.02 μg ml⁻¹ and toluene at 0.01–0.12 μg ml⁻¹. For ferric chloride sulfate, acetone was detected at a level of 0.12 μg ml⁻¹, 1,1,1-trichloroacetone at 0.06–0.08 μg ml⁻¹, trichloromethane at 0.13–0.23 μg ml⁻¹, bromodichloromethane at 0.04–0.06 μg ml⁻¹ and dibromochloromethane at 0.04–0.05 μg ml⁻¹. For aluminium hydroxide chloride, only trichloromethane was detectable, but below the method detection limits (MDL). Although the concentrations of these impurities in commercial coagulants are low, this observation is important and should have impact on water industries for them to pay attention to the chemicals they are using for drinking water production.     

Block Copolymers Containing (R)-3-Hydroxybutyrate and Isosorbide Succinate or (S)-Lactic Acid Mers

A new aliphatic block copolyester was synthesized in bulk from transesterification techniques between poly((R)-3-hydroxybutyrate) (PHB) and poly(isosorbide succinate) (PIS). Additionally, other two block copolyesters were synthesized in bulk either from transesterification reactions involving PHB and poly(l-lactide) (PLLA) or from ring-opening copolymerization of l-lactide and hydroxyl-terminated PHB, as result of a previous transesterification reactions with isosorbide. Two-component blends of PHB and PIS or PLLA were also prepared as comparative systems. SEC, MALDI-TOF mass spectrometry (MALDI-TOFMS), ¹H and ¹³C NMR spectroscopy, WAXD, solubility tests, and TG thermal analysis were used for characterization. The block copolymer structures of the products were evidenced by MALDI-TOFMS, ¹³C NMR, and WAXD data. The block copolymers and the corresponding binary blends presented different solubility properties, as revealed by solubility tests. Although the incorporation of PIS sequences into PHB main backbone did not enhance the thermal stability of the product, it reduced its crystallinity, which could be advantageous for faster biodegradation rate. These products, composed of PHB and PIS or PLLA sequences, are an interesting alternative in biomedical applications.     

Phosphorus in runoff assessed by anion exchange resin extraction and an algal assay

Eutrophication of surface waters can be accelerated by agricultural inputs of phosphorus (P), provided that P is in a form that can be utilized by aquatic algae. We studied anion exchange resin (AER) extraction and a dual culture algal assay (DCAA) for the determination of potentially algal-available P in water samples without sediment preconcentration. Our material consisted of agricultural and forest runoff and wastewaters. The results obtained by the two methods were essentially equal when the samples contained only small amounts of particulate phosphorus (PP) in relation to dissolved molybdate-reactive phosphorus (DRP). However, in turbid agricultural runoff, P extracted with AER averaged 72% (n = 17) of the P yield of the 3-wk DCAA (R2 = 0.94). When the runoff samples were diluted for the AER extraction in the same manner as for the DCAA, the AER-P yield increased to 85% (n = 5) of DCAA-P. The minimum detectable value was greater for the AER test (41 microg L(-1) AER-extractable P) than for the DCAA (7 microg L(-1) DCAA-P). At concentrations greater than about 50 microg L(-1) AER-P or DCAA-P, the accuracy of the methods was satisfactory, with the coefficient of variation in replicated analyses being less than 10% for the AER test and less than 20% for the DCAA. Other anions competing for the exchange sites of the AER decreased P recovery by 15 to 20% when their equivalent concentration exceeded about 4 mmol, L(-1), and this effect was relatively constant over a large concentration range. We consider that AER extraction is a suitable low-cost method to estimate the algal availability of P in runoff samples.     

Does control of soil erosion inhibit aquatic eutrophication?

Much of the phosphorus (P) from erosive soils is transported to water bodies together with eroded soil. Studies clarifying the impact of soil erosion on eutrophication have sought largely to quantify the reserves of P in soil particles that can be desorbed in different types of receiving waters. Aquatic microbiology has revealed that the cycling of P is coupled to the availability of common electron acceptors, Fe oxides and SO?, through anaerobic mineralization in sediments. Eroded soil is also rich in Fe oxides, and their effect on the coupled cycling of C, Fe, S, and P has been neglected in eutrophication research. Soil erosion, and its control, should therefore be studied by considering not only the processes occurring in the water phase but also those taking place after the soil particles have settled to the bottom. We propose that in SO?-rich systems, Fe oxides transported by eroded soil may promote Fe cycling, inhibit microbial SO? reduction and maintain the ability of sediment to retain P. We discuss the mechanisms through which eroded soil may affect benthic mineralization processes and the manner in which soil erosion may contribute to or counteract eutrophication.     

Uncertainty in health risks due to anthropogenic primary fine particulate matter from different source types in Finland

The emission-exposure and exposure-response (toxicity) relationships are different for different emission source categories of anthropogenic primary fine particulate matter (PM_2.5). These variations have a potentially crucial importance in the integrated assessment, when determining cost-effective abatement strategies. We studied the importance of these variations by conducting a sensitivity analysis for an integrated assessment model. The model was developed to estimate the adverse health effects to the Finnish population attributable to primary PM_2.5 emissions from the whole of Europe. The primary PM_2.5 emissions in the whole of Europe and in more detail in Finland were evaluated using the inventory of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario model (FRES), respectively. The emission-exposure relationships for different primary PM_2.5 emission source categories in Finland have been previously evaluated and these values incorporated as intake fractions into the integrated assessment model. The primary PM_2.5 exposure-response functions and toxicity differences for the pollution originating from different source categories were estimated in an expert elicitation study performed by six European experts on air pollution health effects. The primary PM_2.5 emissions from Finnish and other European sources were estimated for the population of Finland in 2000 to be responsible for 209 (mean, 95% confidence interval 6–739) and 357 (mean, 95% CI 8–1482) premature deaths, respectively. The inclusion of emission-exposure and toxicity variation into the model increased the predicted relative importance of traffic related primary PM_2.5 emissions and correspondingly, decreased the predicted relative importance of other emission source categories. We conclude that the variations of emission-exposure relationship and toxicity between various source categories had significant impacts for the assessment on premature deaths caused by primary PM_2.5.     

颗粒物对紫外线灭活二级出水中粪大肠菌的影响

用低压紫外线照射具有相同颗粒物粒径分布的一系列水样,把实验结果带入二重动力学模型进行计算,评价自然状态下颗粒物对粪大肠菌的保护作用. 结果表明,二级出水中的大部分粪大肠菌都与颗粒物交连在一起;在颗粒物<10⁵ C·mL^-1时,颗粒物的增加会明显降低紫外线对二级出水中粪大肠菌的灭活率,但当颗粒物>10⁵ C·mL^-1时,这种影响不明显.从二重动力学模型的计算结果来看,对于不同颗粒物浓度的水样,难灭活的微生物所占的比重很小且比较稳定,大多数与颗粒物结合的粪大肠菌都较易被紫外线灭活.     

Health risk assessment of indoor air pollution in Finnish ice arenas

Poor indoor air quality and epidemic carbon monoxide (CO) and nitrogen dioxide (NO(2)) poisonings due to exhaust emissions from ice resurfacers have been continuously reported from enclosed ice arenas for over 30 years. The health risks in users of Finnish ice arenas were analysed in three ways: (1) evaluation of four cases of epidemic CO poisonings, (2) modelling the association between NO(2) exposure and respiratory symptoms among junior ice hockey players, and (3) estimation of the number of arena users at risk of breathing poor quality air due to non-compliance of ice arenas with recommended abatement measures. The common causes for the CO poisonings involving over 300 subjects were large emissions from propane-fuelled ice resurfacer, small arena volume, negligible ventilation, and very recent opening of the arena. Rhinitis (prevalence 18.3%) and cough (13.7%) during or after training or game were significantly associated with the estimated personal NO(2) exposure of young hockey players (n=793) to average concentrations ranging from 21 to 1176 microg/m(3) in their home arena. During a 6-year follow-up of an intensive information campaign the portion of electric resurfacers increased from 9% to 27%, and that of emission control technology on propane-fuelled resurfacers increased from 13% to 84%. The portion of inadequately ventilated arenas decreased from 34% to 25%. However, 48% of the investigated Finnish ice arenas (n=125) did not fully comply with the non-regulatory recommendations. Consequently, 20000 daily users of ice arenas were estimated to remain in 2001 at risk of breathing poor quality air. Modern small and inadequately ventilated ice arenas pose their users (mostly children and young adults) at risk of breathing poor quality air and suffering from acute adverse health effects. Governmental regulations are needed worldwide to ensure safe sports in enclosed ice arenas.     

Trace metal distribution and control in the pilot-scale bubbling fluidized bed combustor equipped with the pulse-jet fabric filter,limestone injection,and the humidification reactor

This work focused on trace metal behavior and removal in a fabric filter or in a humidification reactor during the cofiring of sawdust and refuse-derived fuels (RDFs) in a pilot-scale bubbling fluidized bed (BFB) boiler. Trace metal emissions measurements before and after the fabric filter revealed that removal efficiency in the fabric filter was in the range of 80-100%, and that the European Union (EU) Directive on Incineration of Waste restrictions for trace metal emissions are easily achieved even if addition of RDFs substantially increases the concentration of trace metals in fuel blends. Limestone injection enhanced the removal of As and Se but had no noticeable effect on the removal of other trace metals. Extensive formation of HgCl2 and condensation on fly ash particles during sawdust plus 40% RDF cofiring resulted in a 92% Hg removal efficiency in the fabric filter. Limestone injection had no effect on the Hg removal in the fabric filter but decreased the Hg removal in a humidification reactor from 40 to 28%. Results of the bed material and fly ash analysis suggested capture of Cu, Pb, Mn, Ni, and Zn in the bed material but also suggested that these metals may be released from the bed if the fuel characteristics or process conditions are changed.