Changes in feeding mechanisms during early ontogeny in juveniles of <Emphasis Type="Italic">Crepidula fecunda</Emphasis> (Gastropoda,Calyptraeidae)

Feeding in early life stages of the sedentary snail Crepidula is effected both by the use of the radula and by filtering with the gill. The present study is a contribution to the knowledge of the mechanisms of feeding by early juvenile snails of Crepidula fecunda. Experimental observations were made on specimens of known ages as they were fed constant concentrations of microalgae in the presence of a primary biological film on a glass substrate. Feeding activity was filmed under the microscope, and images were digitized for the identification and quantification of feeding structures. A morphological analysis was made of the structures associated with this process. Results showed that the radula was functional beginning in 1-day-old juveniles, and the gill functioned in respiration. Gill function in filter-feeding began in juveniles of 9 days old when dorsal and ventral ciliation had developed, as well as the food pouch. The latter structure begins activity as soon as the gill starts food collection. Osphradia appeared simultaneous with development of the filter feeding capacity by the gill. In their earliest stages after metamorphosis, the young snails begin life by radular scraping of primary biofilms, gradually shifting to filter feeding as the gill developed a critical number of filaments and cilia.     

Effects of Geomorphic Setting and Urbanization on Wood,Pools, Sediment Storage,and Bank Erosion in Puget Sound Streams1

Segura, Catalina and Derek B. Booth, 2010. Effects of Geomorphic Setting and Urbanization on Wood, Pools, Sediment Storage, and Bank Erosion in Puget Sound Streams. Journal of the American Water Resources Association (JAWRA) 46(5):972-986. DOI: 10.1111/j.1752-1688.2010.00470.x Abstract: Interrelationships between urbanization, the near-riparian zone, and channel morphology were examined in 44 lowland stream reaches in the Puget Lowlands of western Washington, United States. Both the degree of urbanization and channel type control channel response to a range of instream and riparian conditions. Some of these relationships are not evident in lumped datasets (i.e., with all channel types and/or degrees of urbanization) and highlight the importance of fluvial geomorphology in determining channel response. We found that in low-urbanized watersheds dominated by forced pool-riffle and plane-bed morphologies, the frequency and distribution of large woody debris (LWD), pool spacing, sediment storage, and bank erosion have a strong relationship with channel confinement and characteristics of near-riparian vegetation. In contrast, high-urbanized reaches dominated by simplified morphologies are substantially less sensitive to the condition of the near-riparian zone (e.g., size of the near-riparian vegetation and the level of channel confinement), due to the common disconnection of stream and floodplain caused by the placement of stabilizing structures in the banks. These structures are typically placed to prevent erosion; however, they also result in fewer LWD and pools, less sediment storage, and higher potential for incision.     

Feasibility study prior to the certification of trace elements in urban and industrial wastewater reference materials

Reliable results for the determination of trace elements in urban and industrial wastewaters are of paramount importance for both checking the performance of sewage treatment and for detecting possible urban or industrial contamination sources. The quality control of measurements should in principle rely on external tools such as certified reference materials (CRM), which should represent, as closely as possible, the matrix of samples currently analysed, e.g., in the frame of environmental monitoring. To date, however, no CRM representatives of wastewater composition are available, which limits the possibility for control laboratories to check their QC externally. To fill this gap, the European Commission's Standards, Measurements and Testing Programme (formerly BCR) has started a European collaborative project of which the aim is to test the feasibility of preparation of wastewater reference materials and the analytical state-of-the-art to enable the certification of trace elements in such matrices. This paper presents the results of the first phase of this project, namely the feasibility study and the results of an interlaboratory trial.     

The effect of food supply on feeding strategy in sessile female gastropods<Emphasis Type="Italic"> Crepidula fecunda</Emphasis>

Sessile females of the gastropod Crepidula fecunda are exclusively suspension-feeders. Our previous work showed that particles removed from suspension are entrained on the gill and continuously accumulate as a mucous string on the distal margin of the lamella, although some are transferred by a ciliary tract to the food pouch, where they form a mucous ball. The mucous string is transferred from the gill margin to the neck canal, where it forms a mucous cord which is transported to the mouth. The mucous ball and the mucous cord are ingested with the aid of the radula. In this study we examined the response of the system to a wide range of cell concentrations of the flagellate Isochrysis galbana. As the particle concentration increased from 5,000 to 200,000 cells ml^-1, the volume of the mucous ball almost doubled, as did the number of radular extrusions required to ingest it. The total volume of mucous balls produced and ingested increased very slightly as particle concentration rose from 5,000 to 100,000 cells ml^-1, but the volume of mucous cord material ingested increased four to five times over the same range. At higher food concentrations the mucous cord increased in thickness, but not in length, which is constrained by the length of the gill margin. At all particle concentrations the mucous cord accounted for 80–95% of the total material (mucous cords plus mucous balls). Ingestion rate reached a maximum at 140,000 cells ml^-1 for mucous balls and mucous cords. At higher concentrations the production of pseudofaeces increased from all sources ("type-I" pseudofaeces from rejected mucous balls; "type-II" pseudofaeces from rejected fragments of mucous cords; and "type-III" pseudofaeces, which come from particles trapped in a coarse mucous net at the mouth of the inhalant mantle cavity and are transferred via the lateral ciliary tract to the mantle margin, by-passing the food pouch). Thus C. fecunda has adopted a feeding strategy in which particle entrainment by the gills is continuous, even at very high ambient particle concentrations (200,000 cells ml^-1 for I. galbana), and excess material which cannot be ingested is rejected by one or more of three routes for the elimination of pseudofaeces.Communicated by P.W. Sammarco, Chauvin     

Consequences of maternal isolation from salinity stress for brooded embryos and future juveniles in the estuarine direct-developing gastropod Crepipatella dilatata

At reduced salinities, brooding females of some gastropods and bivalves may isolate their mantle cavities from the environment for several days, maintaining internal osmotic concentration but causing severe declines in dissolved oxygen and pH, and increases in ammonia and other toxic substances in the mantle fluid. This study in November–December examined the immediate consequences of such stresses for brooded embryos of Quempillén estuary gastropod Crepipatella dilatata, in terms of time to juvenile emergence and rates of embryonic growth [measured as shell length (SL)]. Juveniles were also monitored for latent effects on feeding rates, oxygen consumption, and growth for the first 4 weeks after emergence into normal salinity seawater. An acute salinity stress lasting 3 days applied to females that were brooding pre-shelled or intermediate-shelled stages increased embryonic incubation periods, but without affecting SL at emergence. Growth rates were reduced for encapsulated embryos regardless of the stage at which the salinity stress was applied. Latent effects on juvenile development included slower shell growth and reduced rates of oxygen consumption and feeding. These effects were sustained for the first month after release from the female. The results suggest that marked reductions in salinity lasting for several days indirectly but negatively affect the development of brooded embryos of C. dilatata and also affect the juveniles for at least several weeks following their release, even after salinity has returned to normal.     

Quantification of carbamazepine and atrazine and screening of suspect organic contaminants in surface and drinking waters

A new approach for the identification of suspect trace organic contaminants in drinking and surface waters is presented. Samples were initially analyzed using a target determination method for two contamination tracers, carbamazepine (CBZ) and atrazine (ATZ). This method used offline solid-phase extraction and online solid-phase extraction techniques coupled to liquid chromatography-triple quadrupole mass spectrometry to accelerate the sample preparation process and improve method performance. CBZ and ATZ were found respectively in 31% and 56% of the samples, and concentrations were usually <20 ng L⁻¹. These samples were re-analyzed with a similar method on a quadrupole time-of-flight mass spectrometer to identify suspect contaminants by means of exact mass measurements and isotope patterns. A database of 264 common organic contaminants was built and used in conjunction with a Molecular Feature algorithm to identify the presence of these substances in drinking and surface water collected from different sources at various locations across Canada. Several organic contaminants were identified in the samples, but only the presence of caffeine, desethylatrazine, simazine and venlafaxine could be verified by comparison to pure standards. The presence of desethylatrazine was also confirmed by MS/MS experiments. These results suggest that target analysis for tracers of organic contamination may be a helpful tool to prioritize samples which should be further screened for suspect contaminants. This study also shows that the combination of separation techniques (offline and online SPE, LC) contribute to advance the applicability of high-resolution mass spectrometry for the identification of trace organic contaminants by accelerating the preparation step, reducing complexity and increasing analyte concentrations for optimal detection.     

印染行业清洁生产技术

论述了目前印染行业水污染的现状及原因，指出调整产业结构、应用新工艺、大力提倡节约用水、清沽生产将是印染行业实现可持续发展的必由之路。     

Metal diffusion properties of a Nafion-coated porous membrane in an aquatic passive sampler system

A cellulose acetate membrane, positioned in a passive sampler system, was coated with the perfluorinated polymer Nafion. Aqueous metal transport through the membrane and the Nafion film was investigated. The Nafion-coated membrane prevents the transport of metals bound to natural organic material to the receiving phase in the passive sampler, while copper associated with small synthetic ligands pass through the Nafion film. Increasing thickness of the Nafion film decreases the metal uptake rate to the receiving phase in the passive sampler and increases the response time. A decreased response time for the passive sampler would provide a better estimation of rapid changes in concentration, particularly for dynamic aquatic systems such as urban runoff. Limited biofouling protection with the Nafion coating was demonstrated by growth inhibition of natural periphyton communities on glass surfaces.     

Fungal contamination of stored automobile-fuels in a tropical environment

Because of the lack of reports, the base levels of microbial contamination on stored fuels are unknown in tropical regions and it is unclear whether these levels have some influence on fuel quality parameters. Therefore, fungal quality in automobile fuels stored across Costa Rican territory was evaluated during two years according to the standard ASTM D6974-04. For a total of 96 samples, counts and identification of molds and yeasts were performed on regular gas, premium gas and diesel taken from the bottom and superior part of the container tanks. The highest contamination was found on the bottom of the tanks, where an aqueous phase was usually identified, showing populations over the ones present in the hydrocarbon itself (up to 108 CFU/L). Diesel was the most contaminated fuel (up to 107 CFU/L); however, an alteration on the physicochemical parameters was not observed in any kind of fuel. Seventy-five mold strains were isolated, Penicillium sp. being the most common genus (45.8% of the samples), and ten yeast strains, from the genera Candida sp. and Rhodotorula sp. Four of the yeasts were able to grow on diesel as the sole carbon source, at concentrations ranging from 0.5% to 25%. Increasing the frequency of tank cleaning, adding antimicrobial agents and monitoring microbial populations are recommended strategies to improve microbial quality of stored fuels.