Leather Insole with Acupressure Effect: New Perspectives

Some wastes contain many reusable substances of high value. Solid leather waste is one such potential waste which can be converted into value added products. This study attempts to prepare leather insoles with acupressure effect from finished leather wastes and used leather wastes. Leather with acupressure effect (LAE) was fabricated using regenerated leather. LAE was characterized physico-chemically using Fourier transform infrared spectroscopy, thermo gravimetric analysis and scanning electron microscopy. Foot pressure measurements were done using LAE insoles on healthy individuals. Results proved that LAE insoles were able to increase the foot pressure of the wearer and thereby created an acupressure effect in them. Wearing of footwear with LAE insoles were beneficial compared to regular insoles. LAE possessed the required mechanical properties for insole production and it was also biodegradable in nature. The study proves that these composites could be successfully used for the production of cost-effective leather goods and therapeutic footwear. Production of useful byproducts from wastes is income generating and at the same time reduces environmental pollution and a feasible technology for waste recycling has been proved in this study.     

The synergistic effect of air mass on outdoor performance for different PV module in India

The effect of air mass (AM) on the performance of multi-crystalline silicon (m-Si), amorphous silicon (a-Si), and hetero-junction with intrinsic thin layer (HIT)-technology-based photovoltaic (PV) modules are evaluated for representative day of four seasons during the year 2011 for composite climate of India. To find the best performing PV module technology with respect to AM at the site, annual energy yields and performance ratio against different AM bands (AM 1–4.5) are plotted. It is found that HIT modules perform better than m-Si and a-Si at each AM band. Annual energy yields for all three technologies decrease with increasing order of AM bands. The performance ratio for HIT and m-SI modules initially increases and then decreases with increasing order of AM bands. However, for a-Si modules, the performance ratio decreases with increasing order of the AM bands.     

Effect of cadmium individually and in combination with other metals on the nutritive value of fresh water fish,Channa punctatus

Impact of metal cadmium on the nutritive value of Channa punctatus on exposure to a sublethal concentration (1.12 mg/l) of cadmium (Cd2+) for 15 and 60 days has been studied. Among the various parameters selected, the level of moisture in liver and muscle was increased, while decrease was noted in the level of ash, total proteins and inorganic constituents like iron, calcium, inorganic phosphate, sodium and potassium in both liver and muscle in the two types of exposure. The total lipid level of liver increased, while muscle lipid level was decreased. On the other hand, calcium, iron, inorganic phosphate, sodium and potassium levels showed increase in blood. Zinc and selenium decreased the percentage alterations in all the parameters selected for study. In the two types of exposure, zinc was most effective to counteract the cadmium toxicity to fish as in almost all the parameters insignificant alterations were recorded. In combination studies, protection against cadmium toxicity by the two chemicals became more marked with increase in the tenure of exposure.     

Effect of fenvalerate technical grade on acetyl cholinesterase activity in Indian bullfrog Haplobatrachus tigerinus (Daudin)

Indian bullfrog Haplobatrachus tigerinus (Daudin) was exposed to sublethal dose (1/3 of LC50 I.E. 1.166 mg/kg) of fenvalerate technical grade and the effect was studied on the specific activity of acetyl cholinesterase in the different tissues of frog viz., brain, muscle, liver, kidney and testis at different time periods viz., 3,6, 12, 24, 48 and 72 hours. The inhibition of specific activity of acetyl cholinesterase was in the order of kidney > brain > muscle > liver > testis. A significant inhibition was noticed in kidney at 12 hours (-64.33%) and no effect was noticed at 3 hours in testis (+0.67%). The AChE activity was inhibited in first three hours of administration of fenvalerate in all the tissue tested. The inhibition continued upto 6 hours or 2 hours in different tissue but the recovery was started by 24 hours and almost completed by 72 hours.     

Catalytic gasification of coal using eutectic salts: recovery,regeneration, and recycle of spent eutectic catalysts

Catalyst recovery studies were conducted for gasified chars produced from steam gasification of Illinois #6 coal catalyzed with two different catalyst systems. A ternary (43.5 mol% Li2CO3-31.5 mol% Na2COr-25 mol% K2CO3) and a binary (29 mol% Na2CO3-71 mol% K2CO3) eutectic catalyst system were used for gasifying coal. Various extraction schemes, such as water extraction, H2SO4 extraction, and acetic acid extraction, were evaluated with respect to their extraction efficiencies. Effects of major process variables, such as solvent-to-char ratio, mixing time, temperature, and concentration, on the extraction efficiency were evaluated. A process schematic for the entire catalyst recovery, regeneration, and recycle scheme was developed and the preliminary process economics were determined based on these extraction schemes. H2SO4 extraction was found to be the most desirable. It also turned out to be more attractive than a once-through throwaway system.     

Mercury induced alterations in the intestinal,absorption of nutrients in the fresh water murrel, Channapunctatus

The effect of five concentrations (10 mM, 1 mM, 0.1 mM, 0.01 mM and 0.001 mM) of mercury on the rate of absorption of glucose, fructose, glycine and tryptophan by the intestine of the fresh water murrel $\text{Channa}$$\text{punctatus}$ has been studied. Intestinal absorption of these nutrients was also examined in fish exposed to a sublethal concentration (3 μg/l) of mercury for 15 and 30 days. Significant decrease was recorded in the rate of intestinal absorption of all the four nutrients with higher concentrations (10 mM, 1 mM and 0.1 mM) of mercury. 0.01 mM and 0.001 mM of mercury also reduced the transport rate but it was insignificant, except in case of tryptophan, where 0.01 mM of mercury also produced significant decrease. Exposure of fish by bath to mercury also resulted in significant decrease in the intestinal transport rate of all the four nutrients after 30 days.     

Large-scale green synthesis of Cu nanoparticles

This article reports a novel, eco-friendly herbal method to synthesize Cu nanoparticles in large scales. Cu nanoparticles are an alternative to Ag and Au nanoparticles and have potential applications in many industrial areas. Many synthetic routes have been documented for the preparation of copper nanoparticles, but very few routes are eco-friendly and large-scale. We report here the preparation of Cu nanoparticles from aqueous CuSO₄ using non-toxic and inexpensive materials like curd, milk, and herbal extracts such as tamarind and lemon juice as capping agents. X-ray diffraction and transmission electron microscopy show that produced particles are nanocrystalline copper 20–50 nm in size with a face-centered cubic structure. Fourier-transformed infrared spectroscopy evidences the role of organic acids in the capping process. The novelty of this work is the synthesis of Cu nanoparticles from CuSO₄ without electricity and using non-toxic, cheap capping agents.     

Click chemistry approach to conventional vegetable tanning process: accelerated method with improved organoleptic properties

Click chemistry approaches are tailored to generate molecular building blocks quickly and reliably by joining small units together selectively and covalently, stably and irreversibly. The vegetable tannins such as hydrolyzable and condensed tannins are capable to produce rather stable radicals or inhibit the progress of radicals and are prone to oxidations such as photo and auto-oxidation, and their anti-oxidant nature is well known. A lot remains to be done to understand the extent of the variation of leather stability, color variation (lightening and darkening reaction of leather), and poor resistance to water uptake for prolonged periods. In the present study, we have reported click chemistry approaches to accelerated vegetable tanning processes based on periodates catalyzed formation of oxidized hydrolysable and condensed tannins for high exhaustion with improved properties. The distribution of oxidized vegetable tannin, the thermal stability such as shrinkage temperature (T _s) and denaturation temperature (T _d), resistance to collagenolytic activities, and organoleptic properties of tanned leather as well as the evaluations of eco-friendly characteristics were investigated. Scanning electron microscopic analysis indicates the cross section of tightness of the leather. Differential scanning calorimetric analysis shows that the T _d of leather is more than that of vegetable tanned or equal to aldehyde tanned one. The leathers exhibited fullness, softness, good color, and general appearance when compared to non-oxidized vegetable tannin. The developed process benefits from significant reduction in total solids and better biodegradability in the effluent, compared to non-oxidized vegetable tannins.     

Catalytic Gasification of Coal Using Eutectic Salts: Recovery,Regeneration, and Recycle of Spent Eutectic Catalysts

Abstract

Catalyst recovery studies were conducted for gasified chars produced from steam gasification of Illinois #6 coal catalyzed with two different catalyst systems. A ternary (43.5 mol% Li₂ CO₃ –31.5 mol% Na₂ CO₃ –25 mol% K₂ CO₃ ) and a binary (29 mol% Na₂ CO₃ –71 mol% K₂ CO₃ ) eutectic catalyst system were used for gasifying coal. Various extraction schemes, such as water extraction, H₂ SO₄ extraction, and acetic acid extraction, were evaluated with respect to their extraction efficiencies. Effects of major process variables, such as solvent-to-char ratio, mixing time, temperature, and concentration, on the extraction efficiency were evaluated. A process schematic for the entire catalyst recovery, regeneration, and recycle scheme was developed and the preliminary process economics were determined based on these extraction schemes. H₂ SO₄ extraction was found to be the most desirable. It also turned out to be more attractive than a once-through throwaway system.     

Changes in the activities of some digestive enzymes of Channa punctatus,exposed chronically to mercuric chloride

Abstract

The effect of a chronic exposure to sublethal concentration of mercuric chloride (0.3 mg/1) on the activities of some enzymes in the digestive system of the teleost fish Channa punctatus was examined after 15 and 30 days of treatment. Glucose‐6‐phosphatase was significantly inhibited in the intestine and pyloric caeca. No marked alterations were observed in the activities of maltase and lactase except for elevation in maltase activity and inhibition in lactase activity in the intestine and pyloric caeca after 15 days of treatment. Three peptidases (aminotripeptidase, glycylglycine dipeptidase and glycyl‐1‐leucine dipeptidase) showed decreased activities in all parts of the digestive system. A decrease was also observed in the activity of lipase except for the stomach where inhibition after 15 days was insignificant. The results indicate that the activities of all the enzymes examined are inhibited in intestine and pyloric caeca and digestion of proteins and lipids may be more affected by mercury than the digestion of some carbohydrates.