Evidence of reproductive disturbance in Astyanax lacustris (Teleostei: Characiformes) from the Doce River after the collapse of the Fundão Dam in Mariana,Brazil

Environmental Science and Pollution Research - The Fundão Dam collapsed, on November 5th, 2015, dumping more than 50 million/m3 of iron ore tailings, enriched with metals, into the Doce River...     

Management of sludge from fish ponds at the edge of the Itaparica Reservoir (Brazil): an alternative to improve agricultural production

Sludge generated in intensively managed tilapia fingerling breeding ponds near the Itaparica Dam in the semi-arid Brazilian northeastern region was tested as a soil conditioner to produce lettuce in an effort to mitigate the present environmental impact of the deposition of this sludge, thereby giving it a productive destiny. A greenhouse experiment was performed by mixing the sludge with a Haplic Planosol topsoil, a characteristic soil of the region, so that the sludge corresponded to 0, 25, 50, 75, and 100% of the mixture (substrate). The experiment was set up as a randomized block design with five blocks, each with three pots (5-kg substrate per pot) of the five sludge proportion treatments. One lettuce plant was transplanted into each pot, maintained under greenhouse conditions, and harvested 35 days after transplanting. Sludge, soil, and the substrates were evaluated for nutrient concentration and physical characteristics. Green and dry weights, stem diameter, and nitrogen, phosphorus, and potassium concentrations in the aboveground parts of the lettuce plants were determined. Sludge incorporation into the substrate improved its chemical and physical characteristics. The lettuce plants grew best in the substrate with 75% sludge, increasing its biomass production by 50% and more than doubling its nitrogen uptake.     

Petroleum Hydrocarbons Rhizodegradation by Sebastiania commersoniana (Baill.) L. B. SM. & Downs

Petroliferous activities in Brazil have an accelerated development in the last years. As a consequence, the incidence of environmental accidents such as oil spills and contamination of soils has increased significantly. Therefore, it is extremely necessary to develop remediation techniques with lower costs, decontamination efficiency and impact minimisation. The aim of this work was to evaluate Sebastiania commersoniana phytoremediation potential in soil contaminated by petroleum. This species, which is a native tree, was selected due to its proven capacity for surviving in areas contaminated by petroleum. Experiments were carried out with soils that were vegetated but non-contaminated, soils that were freshly contaminated (25, 50 and 75 g kg^?1) but non-vegetated, and soils that were vegetated and contaminated, samples were collected 60 and 424 days after contamination with the purpose of evaluating the percentage of petroleum degradation in relation to the time. The results obtained in the present study allow us to state that S. commersoniana proves to be tolerant to petroleum contamination with respect to plant’s growth. The degradation of petroleum hydrocarbons was evaluated by gas chromatography with a flame ionisation detector (GC-FID) equipped with a capillary column HP-5 (5% phenyl-methylpolysiloxane, 30 m; 0.25 mm; 0.25 μm). According to chromatographic analysis, samples in contact with S. commersoniana showed a significant area reduction of the hydrocarbon peaks. Analysis of the 60-day samples showed a reduction of petroleum hydrocarbons area higher than 60% and the 424-day samples showed a reduction higher than 94%, which demonstrates that a petroleum degradation process is occurring.     

Analysis of indoor gaseous formic and acetic acid, using radial diffusive samplers

A diffusive sampling method for the determination of gaseous acetic and formic acids, using a radial symmetry diffusive sampler, has been optimised for a 7-day exposure time in this study. Sampling rate determinations were performed on data obtained from a dynamic exposure chamber, simulating the indoor conditions of an empty, closed, room, at room temperature and minimal wind speed. Analysis has been performed by means of ion chromatography. The sampling rates for formic acid concentrations of 128 microg m(-3) and 1248 microg m(-3) were determined to be 91.2 +/- 3.9 ml min(-1) and 111.6 +/- 2.8 ml min(-1), respectively. The acetic acid sampling rate was independent of the concentration in the range 160 microg m(-3)-1564 microg m(-3), and amounted to 97.3 +/- 3.1 ml min(-1). Experimentally determined sampling rates showed deviations of 3% for acetic acid, and 3-21% for formic acid, in relation to theoretically derived values. The blank values were as low as 1.69 +/- 0.07 microg for formic acid and 1.21 +/- 0.14 microg for acetic acid, and detection limits lower than 0.5 microg m(-3) could be achieved, which is an improvement of 98-99% compared to previously validated diffusive sampling methods. This study describes the first step of an extended validation program in which the applicability of these types of samplers for the measurement of organic acids will be validated and optimised for the environmental conditions typical for museum showcases.     

Synthesis of an organic–inorganic composite from calcium carbonate and Kraft lignin and its use as carrier material for controlled release of semiochemical agents

Environmental Science and Pollution Research - The control of pests in agricultural systems is currently based on the widespread use of pesticides that efficiently control pests but have negative...     

Atmospheric BTEX-concentrations in an area with intensive street traffic

The major threat to clean air in developed and industrializing countries is now posed by traffic emissions. The effects of traffic road modifications on the air quality are, however, rarely reported in the literature. The aim of this study was to determine the influence of the modernization and renovation of a traffic artery in the region of Mortsel (Antwerp, Belgium) on the concentration of volatile organic compounds such as: benzene, toluene, ethylbenzene and m-, p-, o-xylenes (BTEX). The original goal of the reconstruction works was to reduce the traffic lanes of one of the busiest streets in Antwerp, in order to discourage the road traffic and in consequence also to improve the air quality in this region. The average concentrations of BTEX before these works in 2003 were: 1.6, 7.0, 0.9, 2.3, and 0.9 μg/m³, for benzene, toluene, ethylbenzene, m + p xylenes, and o-xylene, respectively. However, after the completion of the works, in 2005, they were slightly higher: 2.5, 9.5, 1.6, 3.4, and 1.3 μg/m³, respectively. The scatter plots of benzene against toluene, ethylbenzene and xylenes in 2003 and 2005 showed very good correlations. This fact indicated that all of the measured compounds originated from the same source, namely the road traffic. Moreover, the data obtained from an air-monitoring station at less than 6 km distance from the sampling site (operated by the Flemish Environment Agency, and located in Borgerhout, Antwerp), confirmed the lack of influence of background concentrations of BTEX. The obtained results led to the conclusion that the reduction of the number of traffic lanes had apparently increased the traffic jams and also increased the emission from cars. Therefore, these modernization works had even a negative impact on the local concentration of traffic-related pollutants as BTEX.