中美煤矿安全比较与借鉴

中国和美国都是煤炭生产和消费大国,但是中国的煤矿安全却与美国存在巨大差距。笔者首先从两国历年来煤矿安全数据分析入手,认为:美国煤矿安全经历了严重恶化、小幅波动和安全稳定3个阶段;而中国的煤矿经历了改革开放前大起大落和其后的小幅波动两个阶段,迄今为止,还没有进入安全稳定时期。然后从法规、监察、采矿权、安全投入、矿工及工会、教育及培训、科技进步等7个方面对两国的煤矿安全进行了比较。最后,借鉴美国进入第3阶段的成功经验,提出一些改善中国煤矿安全的相应对策建议,如完善法规、加强监管、明晰采矿权、设立安全投入预算资金、改善矿工的弱势地位、加强教育与培训、依靠科技进步等。     

C60 fullerene: a powerful antioxidant or a damaging agent? The importance of an in-depth material characterization prior to toxicity assays

Since the discovery of fullerenes in 1985, these carbon nanospheres have attracted attention regarding their physico/chemical properties. Despite little knowledge about their impact on the environment and human health, the production of fullerenes has already reached an industrial scale. However, the toxicity of C₆₀ is still controversially discussed.The aim of this study was to clarify the biological effects of tetrahydrofuran (THF) suspended C₆₀ fullerene in comparison to water stirred C₆₀ fullerene suspensions. Beyond that, we analyzed the effects on the Crustacea Daphnia magna an indicator for ecotoxicological effects and the human lung epithelial cell line A549 as a simplified model for the respiratory tract.We could demonstrate that water-soluble side products which were formed in THF nC₆₀ suspension were responsible for the observed acute toxic effects, whereas fullerenes themselves had no negative effect regardless of the preparative route on either A549 cell in vitro or D. magna in vivo.     

Principles of microbial PAH-degradation in soil

Interest in the biodegradation mechanisms and environmental fate of polycyclic aromatic hydrocarbons (PAHs) is motivated by their ubiquitous distribution, their low bioavailability and high persistence in soil, and their potentially deleterious effect on human health. Due to high hydrophobicity and solid-water distribution ratios, PAHs tend to interact with non-aqueous phases and soil organic matter and, as a consequence, become potentially unavailable for microbial degradation since bacteria are known to degrade chemicals only when they are dissolved in water. As the aqueous solubility of PAHs decreases almost logarithmically with increasing molecular mass, high-molecular weight PAHs ranging in size from five to seven rings are of special environmental concern. Whereas several reviews have focussed on metabolic and ecological aspects of PAH degradation, this review discusses the microbial PAH-degradation with special emphasis on both biological and physico-chemical factors influencing the biodegradation of poorly available PAHs.     

Effect of electrokinetic transport on the vulnerability of PAH-degrading bacteria in a model aquifer

There has been increasing interest in employing electro-bioremediation, a hybrid technology of bioremediation and electrokinetics, to overcome the low bioavailability of hydrophobic organic contaminants (HOC) by homogenizing sorption-retarded HOC and immobilised microorganisms. Present electro-remediation approaches mainly aim at macroscale pollutant extraction and tend to neglect possible impacts of direct current (DC) on the physiology of microorganisms. The effect of weak electric fields (X = 1 V cm⁻¹) on the fitness of electrokinetically dispersed fluorene-degrading Sphingomonas sp. LB126 in bench-scale model aquifers was investigated by flow cytometry using propidium iodide (PI) as an indicator that distinguishes between PI-permeable (cells with porous membranes, i.e. dead or vulnerable) and PI-impermeable bacteria. After 15.5 h of DC treatment 56% of all cells recovered were dispersed at the centimetre scale relative to 29% in the absence of DC. There was no overall negative effect of the 15.5-h DC treatment on cell vulnerability, as 7.0% of the DC-treated bacteria exhibited PI-staining compared to 6.5% of the control population. Minor differences were observed in the subpopulation that had been mobilised by electroosmosis with an approximately twofold increase in the percentage of PI-stained cells relative to the control. Enhanced PI staining did not correlate with reduced culturability of the cells on rich-medium agar plates. Relative to the control, DC-treated cells mobilised by electroosmosis were threefold more culturable, confirming earlier data that that PI-cell membrane permeability does not always indicate reduced viability of oligotrophic environmental bacteria. Our findings suggest that electrokinetics is a valuable mechanism to transport viable and culturable polycyclic aromatic hydrocarbon (PAH)-degrading bacteria in soil or sediments.     

Holocene biomass burning and global dynamics of the carbon cycle

Fire regimes have changed during the Holocene due to changes in climate, vegetation, and in human practices. Here, we hypothesise that changes in fire regime may have affected the global CO2 concentration in the atmosphere through the Holocene. Our data are based on quantitative reconstructions of biomass burning deduced from stratified charcoal records from Europe, and South-, Central- and North America, and Oceania to test the fire-carbon release hypothesis. In Europe the significant increase of fire activity is dated approximately 6000 cal. yr ago. In north-eastern North America burning activity was greatest before 7500 years ago, very low between 7500-3000 years, and has been increasing since 3000 years ago. In tropical America, the pattern is more complex and apparently latitudinally zonal. Maximum burning occurred in the southern Amazon basin and in Central America during the middle Holocene, and during the last 2000 years in the northern Amazon basin. In Oceania, biomass burning has decreased since a maximum 5000 years ago. Biomass burning has broadly increased in the Northern and Southern hemispheres throughout the second half of the Holocene associated with changes in climate and human practices. Global fire indices parallel the increase of atmospheric CO2 concentration recorded in Antarctic ice cores. Future issues on carbon dynamics relatively to biomass burning are discussed to improve the quantitative reconstructions.     

Environmental and health effects of nanomaterials in nanotextiles and façade coatings

Engineered nanomaterials (ENM) are expected to hold considerable potential for products that offer improved or novel functionalities. For example, nanotechnologies could open the way for the use of textile products outside their traditional fields of applications, for example, in the construction, medical, automobile, environmental and safety technology sectors. Consequently, nanotextiles could become ubiquitous in industrial and consumer products in future. Another ubiquitous field of application for ENM is fa?ade coatings. The environment and human health could be affected by unintended release of ENM from these products. The product life cycle and the product design determine the various environmental and health exposure situations. For example, ENM unintentionally released from geotextiles will probably end up in soils, whereas ENM unintentionally released from T-shirts may come into direct contact with humans and end up in wastewater. In this paper we have assessed the state of the art of ENM effects on the environment and human health on the basis of selected environmental and nanotoxicological studies and on our own environmental exposure modeling studies. Here, we focused on ENM that are already applied or may be applied in future to textile products and fa?ade coatings. These ENM's are mainly nanosilver (nano-Ag), nano titanium dioxide (nano-TiO(2)), nano silica (nano-SiO(2)), nano zinc oxide (nano-ZnO), nano alumina (nano-Al(2)O(3)), layered silica (e.g. montmorillonite, Al(2)[(OH)(2)/Si(4)O(10)]nH(2)O), carbon black, and carbon nanotubes (CNT). Knowing full well that innovators have to take decisions today, we have presented some criteria that should be useful in systematically analyzing and interpreting the state of the art on the effects of ENM. For the environment we established the following criteria: (1) the indication for hazardous effects, (2) dissolution in water increases/decreases toxic effects, (3) tendency for agglomeration or sedimentation, (4) fate during waste water treatment, and (5) stability during incineration. For human health the following criteria were defined: (1) acute toxicity, (2) chronic toxicity, (3) impairment of DNA, (4) crossing and damaging of tissue barriers, (5) brain damage and translocation and effects of ENM in the (6) skin, (7) gastrointestinal or (8) respiratory tract. Interestingly, some ENM might affect the environment less severely than they might affect human health, whereas the case for others is vice versa. This is especially true for CNT. The assessment of the environmental risks is highly dependent on the respective product life cycles and on the amounts of ENM produced globally.     

A new ceratopsian dinosaur from the Javelina Formation (Maastrichtian) of West Texas and implications for chasmosaurine phylogeny

Bravoceratops polyphemus gen. et sp. nov. is a large chasmosaurine ceratopsid from the lowermost part of the Javelina Formation (early Maastrichtian) of Big Bend National Park, TX, USA. B. polyphemus has a distinctive narrow snout, a long fenestrate frill, and a fan-shaped median parietal bar with a midline epiparietal on its posterior margin, as well as a symmetrical depression on its dorsal surface at the nexus of the parietal rami. This depression is interpreted to be the attachment point for a second midline epiparietal. This parietal morphology is distinct from that exhibited by Anchiceratops or Pentaceratops. The posterior midline epiparietal in B. polyphemus and its bifurcated quadratojugal–squamosal joint are features shared with the most derived chasmosaurines, Torosaurus and Triceratops. The combination of primitive and derived traits exhibited by B. polyphemus, and its stratigraphic position, is compatible with the gradual transition from basal, to intermediate, to derived chasmosaurines observed throughout the western interior of North America, and with phylogenetic analysis, which suggests that Bravoceratops may be closely related to Coahuilaceratops.     

Use of Ergonomics as a Quality Improvement Tool in a Manual Assembly Task

This study attempted to identify a direct relationship between the design characteristics of a manually-assembled product, exposure to work-related ergonomic risk factors, and improvement in product quality. The study considered (a) Accessibility (ease of approach) and Guidance (ease of alignment and positioning) as Design Variables, (b) Shoulder Abduction, Trunk Lateral Flexion, Rate-Normalized Percentage of Maximal Voluntary Contraction (%MVC) of the Wrist Flexors, Wrist Extensors, and Deltoids, and Frequency of Attachment as Ergonomics Variables, and (c) Percentage of Attachment Too Loose, Too Tight, and Misaligned as Quality Variables. Postural data, surface EMG data, and quality data were collected from 10 participants performing four 10-min repetitive manual assembly tasks with plastic threaded nuts, bolts, flat parts, and open-box parts. Unobstructed accessibility of manually-assembled parts was associated with decreased exposure to awkward trunk posture, decreased activity of the wrist flexors and extensors, increased frequency of repetitive motion, and a decrease in the tendency to attach parts too loosely. Accessibility had no effect on misalignment defects as measured. Part guidance decreased the number of parts attached too tightly and aided in increasing the rate of assembly of parts when there was unobstructed access to parts.