Removal of pesticides from secondary treated urban wastewater by reverse osmosis

Environmental Science and Pollution Research - The residues of pesticides that reach water resources from agricultural activities in several ways contaminate drinking water resources and threaten...     

Determining the impact of urban components on land surface temperature of Istanbul by using remote sensing indices

For the past 60 years, Istanbul has been experiencing an accelerated urban expansion. This urban expansion is leading to the replacement of natural surfaces by various artificial materials. This situation has a critical impact on the environment due to the alteration of heat energy balance. In this study, the effect upon the urban heat island (UHI) of Istanbul was analyzed using 2009 dated Landsat 5 Thematic Mapper (TM) data. An Index Based Built-up Index (IBI) was used to derive artificial surfaces in the study area. To produce the IBI index, Soil-Adjusted Vegetation Index, Normalized Difference Built-up Index, and Modified Normalized Difference Water Index were calculated. Land surface temperature (LST) distribution was derived from Landsat 5 TM images using a mono-window algorithm. In addition, 24 transects were selected, and different regression models were applied to explore the correlation between LST and IBI index. The results show that artificial surfaces have a positive exponential relationship with LST rather than a simple linear one. An ecological evaluation index of the region was calculated to explore the impact of both the vegetated land and the artificial surfaces on the UHI. Therefore, the quantitative relationship of urban components (artificial surfaces, vegetation, and water) and LST was examined using multivariate statistical analysis, and the correlation coefficient was obtained as 0.829. This suggested that the areas with a high rate of urbanization will accelerate the rise of LST and UHI in Istanbul.     

Monitoring of heavy metal and organic compound levels along the Eastern Aegean coast with transplanted mussels

Within the framework of the MYTITURK project, heavy metals and organic compounds contaminations were assessed in transplanted mussels in eight different bays from the Eastern Aegean coast. Izmir Bay, Canakkale Strait entrance, Saros and Candarli Bay were defined low pollution extent according to Principal Component Analysis taking into metal accumulation. PAHs (Polycyclic Aromatic Hydrocarbons) levels in the range of 29.4–64.2 ng g⁻¹ (dry weight) indicated that PAH contamination level classified as low along the Aegean coast. Concentrations of Aroclor1254 and 1260 were higher in transplanted mussels from Canakkale Strait Outlet due to industrial activities was originated from Marmara Sea. The organochlorinated pesticides such as heptachlor (<0.4 ng g⁻¹), aldrin (<0.30 ng g⁻¹), dieldrin (<0.75 ng g⁻¹), endrin (<2.3 ng g⁻¹) concentrations were homogeneous however, HCB (Hexachlorobenzene) and lindane concentrations were found undetectable level along the coast. DDE/DDT ratio in the caged mussels form Gulluk and Gokova Bay indicated recent DDT (Dikloro difenil trikloroethan) usage in these areas. The residues of organochlorinated compounds in transplanted mussels confirm the long persistence of DDTs. According to world health authorities, the concentration of heavy metals in mussels for the study area can generally be considered not to be at levels posing a health risk except Zn. The levels of POPs indicated that transplanted mussels have a lack of risk for the human health.     

Evaluation of the relationship of picoplankton and viruses to environmental variables in a lagoon system (Çakalburnu Lagoon,Turkey)

Lagoons are defined as wetlands separated from the sea coasts on which they are located and sit between continental and marine aquatic ecosystems. Çakalburnu Lagoon is a coastal wetland on the southern side of the Bay of ?zmir. Microorganisms, which are quite sensitive to changes occurring in environmental factors, are commonly used to determine the impact of environmental effects on the functioning of the ecosystem. In this study, variations in the abundance and biomass of picoplankton (Synechococcus spp. and bacteria) and the abundance of viruses, which identify the ecological productivity of the food chain, were seasonally examined by epifluorescence microscopy. Moreover, the microbial abundance and biomass relation over time between the physical and chemical parameters was evaluated. According to our results, the maximum abundance of Synechococcus spp. and viruses was 6.7?×?10⁴ cell/ml and 9.9?×?10⁸?cell/ml in the summer, respectively. Otherwise, the highest level of bacteria was measured at 3.6?×?10⁷ cell/ml in the spring. Based on the principal component analysis and Pearson correlation analysis results, we concluded that total suspended solids, Chl-a, particulate organic carbon and particulate organic nitrogen were the major parameters influencing the observed variability of the lagoon system. Overall, to protect and improve the ecological and microbiological quality of aquatic systems such as lagoons, the necessary monitoring and measurement studies should be conducted in these sensitive areas.     

The Removal of Acid Violet 90 from Aqueous Solutions Using PANI and PANI/Clinoptilolite Composites: Isotherm and Kinetics

Polyaniline (PANI) and polyaniline/Gördes-clinoptilolite (PANI/GC) composite materials were synthesized by the chemical oxidative polymerization technique and used in the adsorption of Acid Violet 90 metal-complex dye (AV 90). The samples were characterized by X-ray diffractions, nitrogen adsorption–desorption isotherms, scanning electron microscopes and Fourier transform infrared. The effect of initial pH (2–8), sorbent dosage (0.5–4.0 g/L) and initial dye concentrations (50–400 mg/L) on adsorption onto PANI and PANI/GC were examined in a batch system. Langmuir, Freundlich and Temkin isotherm models were used to investigate the adsorption mechanism of AV 90 on PANI and PANI/GC. Langmuir isotherm model for PANI/GC and Freundlich isotherm model for PANI were fitted well with the experimental data. The highest dye uptake capacities were obtained with Langmuir isotherm model as 153.85 mg/g and 72.46 mg/g for PANI and PANI/GC, respectively. In order to determine the adsorption kinetics, pseudo first-order and second-order kinetic models were studied. As a result, the adsorption of AV 90 dye on PANI and PANI/GC was better identified with Pseudo second-order kinetic model than the first one.     

Aliphatic and polycyclic aromatic hydrocarbons in the surface sediments from the Eastern Aegean: assessment and source recognition of petroleum hydrocarbons

Materials and methods  

Aliphatic and polycyclic aromatic hydrocarbons (PAHs) were determined in surficial sediments from the Aegean Sea in the Eastern Mediterranean in 2008.     

An investigation into reservoir NOM reduction by UV photolysis and advanced oxidation processes

A comparison of four treatment technologies for reduction of natural organic matter (NOM) in a reservoir water was made. The work presented here is a laboratory based evaluation of NOM treatment by UV-C photolysis, UV/H(2)O(2), Fenton's reagent (FR) and photo-Fenton's reagent (PFR). The work investigated ways of reducing the organic load on water treatment works (WTWs) with a view to treating 'in-reservoir' or 'in-pipe' before the water reaches the WTW. The efficiency of each process in terms of NOM removal was determined by measuring UV absorbance at 254 nm (UV(254)) and dissolved organic carbon (DOC). In terms of DOC reduction PFR was the most effective (88% removal after 1 min) however there were interferences when measuring UV(254) which was reduced to a lesser extent (31% after 1 min). In the literature, pH 3 is reported to be the optimal pH for oxidation with FR but here the reduction of UV(254) and DOC was found to be insensitive to pH in the range 3-7. The treatment that was identified as the most effective in terms of NOM reduction and cost effectiveness was PFR.     

Spatial distribution and source apportionment of PCBs in sediments around İzmit industrial complexes, Turkey

The spatial distribution, degree of pollution and major sources of PCBs were evaluated in surficial sediments within the heavily urbanized and industrialized ?zmit Bay and its main freshwater inputs. ΣPCB concentrations range from 2.90 to 85.4ngg(-1) in marine sediments and from ND to 47.7ngg(-1) in freshwater sediments. Results suggest that high concentrations of ΣPCBs were localized around a chlor-alkali plant and an industry that handles bulk liquid, dry and drummed chemicals, and petroleum products in the Bay. Using a chemical mass balance receptor model (CMB), major sources of PCBs in the region were investigated. The CMB model identified Aroclor 1254 and 1260 to be the major PCB sources in marine sediments and the less chlorinated Aroclor 1248 and 1242 as the major PCB sources in freshwater sediments. The potential sources for the PCBs were briefly discussed in terms of their use in various industrial applications.     

Complete desalination of seawater using a novel polyvinylidene fluoride/zeolite membrane

Water scarcity arises rapidly with increasing human population, urbanization and industrialization. Therefore, water production from natural sources using efficient and environmental friendly technologies is gaining attention. Pervaporative desalination is a promising technology based upon membrane filtration. Here, we fabricated and tested a novel hybrid-composite membrane: polyvinylidene fluoride (PVDF)/polyvinyl pyrrolidone/(PVP)/3A zeolite. Desalination performance was evaluated in terms of flux, salt rejection, zeolite incorporation within the membrane and temperature. Results show that all membranes exhibited salt rejection higher than 99.5%. The highest flux of 2.5 kg m^?2 h^?1 and salt rejection of 99.9% were obtained using 10 wt% 3A incorporated PVDF/PVP membrane at 40 °C. The PVDF/PVP/3A zeolite membrane preserved its stability during 55-h desalination operating without performance decline.