Receptor model-based source apportionment of particulate pollution in Hyderabad, India

Air quality in Hyderabad, India, often exceeds the national ambient air quality standards, especially for particulate matter (PM), which, in 2010, averaged 82.2?±?24.6, 96.2?±?12.1, and 64.3?±?21.2 μg/m³ of PM₁₀, at commercial, industrial, and residential monitoring stations, respectively, exceeding the national ambient standard of 60 μg/m³. In 2005, following an ordinance passed by the Supreme Court of India, a source apportionment study was conducted to quantify source contributions to PM pollution in Hyderabad, using the chemical mass balance (version 8.2) receptor model for 180 ambient samples collected at three stations for PM₁₀ and PM_2.5 size fractions for three seasons. The receptor modeling results indicated that the PM₁₀ pollution is dominated by the direct vehicular exhaust and road dust (more than 60 %). PM_2.5 with higher propensity to enter the human respiratory tracks, has mixed sources of vehicle exhaust, industrial coal combustion, garbage burning, and secondary PM. In order to improve the air quality in the city, these findings demonstrate the need to control emissions from all known sources and particularly focus on the low-hanging fruits like road dust and waste burning, while the technological and institutional advancements in the transport and industrial sectors are bound to enhance efficiencies. Andhra Pradesh Pollution Control Board utilized these results to prepare an air pollution control action plan for the city.     

Preliminary measurements of summer nitric acid and ammonia concentrations in the Lake Tahoe Basin air-shed: implications for dry deposition of atmospheric nitrogen

Over the past 50 years, Lake Tahoe, an alpine lake located in the Sierra Nevada mountains on the border between California and Nevada, has seen a decline in water clarity. With significant urbanization within its borders and major urban areas 130 km upwind of the prevailing synoptic airflow, it is believed the Lake Tahoe Basin is receiving substantial nitrogen (N) input via atmospheric deposition during summer and fall. We present preliminary inferential flux estimates to both lake surface and forest canopy based on empirical measurements of ambient nitric acid (HNO3), ammonia (NH3), and ammonium nitrate (NH4NO3) concentrations, in an effort to identify the major contributors to and ranges of atmospheric dry N deposition to the Lake Tahoe Basin. Total flux from dry deposition ranges from 1.2 to 8.6 kg N ha-1 for the summer and fall dry season and is significantly higher than wet deposition, which ranges from 1.7 to 2.9 kg N ha-1 year-1. These preliminary results suggest that dry deposition of HNO3 is the major source of atmospheric N deposition for the Lake Tahoe Basin, and that overall N deposition is similar in magnitude to deposition reported for sites exposed to moderate N pollution in the southern California mountains.     

Comparison and evaluation of chemically speciated mobile source PM2.5 particulate matter profiles

Mobile sources are significant contributors to ambient PM2.5, accounting for 50% or more of the total observed levels in some locations. One of the important methods for resolving the mobile source contribution is through chemical mass balance (CMB) receptor modeling. CMB requires chemically speciated source profiles with known uncertainty to ensure accurate source contribution estimates. Mobile source PM profiles are available from various sources and are generally in the form of weight fraction by chemical species. The weight fraction format is commonly used, since it is required for input into the CMB receptor model. This paper examines the similarities and differences in mobile source PM2.5 profiles that contain data for elements, ions, elemental carbon (EC) and organic carbon (OC), and in some cases speciated organics (e.g., polycyclic aromatic hydrocarbons [PAHs]), drawn from four different sources. Notable characteristics of the mass fraction data include variability (relative contributions of elements and ions) among supposedly similar sources and a wide range of average EC:OC ratios (0.60 +/- 0.53 to 1.42 +/- 2.99) for light-duty gasoline vehicles (LDGVs), indicating significant EC emissions from LDGVs in some cases. For diesel vehicles, average EC:OC ratios range from 1.09 +/- 2.66 to 3.54 +/- 3.07. That different populations of the same class of emitters can show considerable variability suggests caution should be exercised when selecting and using profiles in source apportionment studies.     

Comparison and Evaluation of Chemically Speciated Mobile Source PM2.5 Particulate Matter Profiles

ABSTRACT

Mobile sources are significant contributors to ambient PM_{2 5}, accounting for 50% or more of the total observed levels in some locations. One of the important methods for resolving the mobile source contribution is through chemical mass balance (CMB) receptor modeling. CMB requires chemically speciated source profiles with known uncertainty to ensure accurate source contribution estimates. Mobile source PM profiles are available from various sources and are generally in the form of weight fraction by chemical species. The weight fraction format is commonly used, since it is required for input into the CMB receptor model. This paper examines the similarities and differences in mobile source PM_2.5 profiles that contain data for elements, ions, elemental carbon (EC) and organic carbon (OC), and in some cases speciated organics (e.g., polycyclic aromatic hydrocarbons [PAHs]), drawn from four different sources.

Notable characteristics of the mass fraction data include variability (relative contributions of elements and ions) among supposedly similar sources and a wide range of average EC:OC ratios (0.60 ± 0.53 to 1.42 ± 2.99) for light-duty gasoline vehicles (LDGVs), indicating significant EC emissions from LDGVs in some cases. For diesel vehicles, average EC:OC ratios range from 1.09 ± 2.66 to 3.54 ± 3.07. That different populations of the same class of emitters can show considerable variability suggests caution should be exercised when selecting and using profiles in source apportionment studies.     

Comparison of the SCAQS Tunnel Study with Other On Road Vehicle Emission Data

The Van Nuys Tunnel experiment conducted in 1987 by Ingalls et al. (see A&WMA Paper 89-137.3), to verify automotive emission inventories as part of the Southern California Air Quality Study (SCAQS), gave higher CO and HC emission-rate values than expected on the basis of automotive-emission models—by factors of approximately 3 and 4, respectively. The CO/NO_X and HC/NO_X emission-rate ratios moreover were higher than expected—by similar factors (NO_X emission rates were about as expected). The purpose of the present paper is to review the literature on dynamometer and on-road (in tunnels and along roadways) testing of in-use vehicles, and on urban-air CO/HC/NO_X concentration ratios, to see whether the Van Nuys Tunnel results are reasonable in terms of previous experience. The conclusions are that (1) on-road CO and HC emissions higher than expected have been reported before, (2) on-road CO and HC emissions consistent with the Van Nuys Tunnel results have been reported before, and (3) on-road CO/NO_X and HC/NO_X emission-rate ratios higher than expected have been reported before. The Van Nuys Tunnel NO_X results actually are lower than in other on-road experiments, and the CO/NO_X and HC/NO_X ratios consequently are higher. The higher-than-predicted CO/NO_X and HC/NO_X ratios at Van Nuys and other on-road sites suggest richer operation on-road than predicted or than observed in the inuse- vehicle dynamometer tests which serve as the model inputs. Support for these suggestions and conclusions is found in comparison of urban-air and emission-inventory HC/NO_X ratios.     

Presence of hydrocarbon-degrading bacteria in the gills of mussel Mytilus galloprovincialis in a contaminated environment: a mesoscale simulation study

A number of previous studies have shown that the relationships of symbiosis existing between mussels and microorganisms are directly dependent on the environmental conditions. However, little is known about existing relationships between mussels and bacteria in hydrocarbon-impacted marine environments. The aim of this preliminary study is to investigate the presence of oil-degrading bacteria in the mussel Mytilus galloprovincialis during growth in polluted ecosystems. All the experiments were carried out in a mesocosm system designed to simulate chronic pollution and to enable direct exposure of mussels to chemicals. Quantitative (4′,6-diamidino-2-phenylindole, colony-forming units, Most Probable Number) analyses and screening (presence/absence) of metabolic functional genes were performed to analyse bacterial populations inside the gills of mussels exposed and not exposed to hydrocarbons. The data obtained show that the presence of hydrocarbons affected the abundance of bacteria inside the gills of specimens and determines selection for specific (hydrocarbon-degrading) bacteria (i.e. Alcanivorax sp. and Marinobacter sp.). However, is not yet clear whether the presence of such genera of bacteria inside the mussel is due to symbiosis or as a result of filtration.     

Road Dust Resuspension in the Vicinity of Limestone Quarries in Jordan

Abstract

Many areas in Jordan suffer from elevated levels of coarse particulate matter (PM₁₀). One potentially significant source of the observed PM is the resuspension of road dust in the vicinity of limestone quarries. To obtain data to assess the impact from this source, PM₁₀ road dust resus-pension factors near Abusiiah, a town to the north east of Amman surrounded by many quarries and brick factories, were measured. Measurements included PM₁₀ mass, particle size distributions, wind speed, and wind direction.The results showed that PM₁₀ concentrations could be as high as 600 µg/m³, and most of the airborne PM is in the coarse fraction. Loading trucks play a major role in resus-pending road dust, with an observed PM₁₀ emission rate of >6000 mg/km.     

Motor Vehicle Contributions to Ambient PM10 and PM2.5 at Selected Urban Areas in the USA

A source apportionment study was carried out to estimate the contribution of motor vehicles to ambient particulate matter (PM) in selected urban areas in the USA. Measurements were performed at seven locations during the period September 7, 2000 through March 9, 2001. Measurements included integrated PM_2.5 and PM₁₀ concentrations and polycyclic aromatic hydrocarbons (PAHs). Ambient PM_2.5 and PM₁₀ were apportioned to their local sources using the chemical mass balance (CMB) receptor model and compared with results obtained using scanning electron microscopy (SEM). Results indicate that PM_2.5 components were mainly from combustion sources, including motor vehicles, and secondary species (nitrates and sulfates). PM₁₀ consisted mainly of geological material, in addition to emissions from combustion sources. The fractional contributions of motor vehicles to ambient PM were estimated to be in the range from 20 to 76% and from 35 to 92% for PM_2.5 and PM₁₀, respectively.     

Sources of volatile organic compounds in Cairo’s ambient air

The greater Cairo area suffers from extreme levels of gas and particulate phase air pollutants. In order to reduce the levels of ambient pollution, the USAID and the Egyptian Environmental Affairs Agency (EEAA) have supported the Cairo Air Improvement Project (CAIP). As part of this project, two intensive ambient monitoring studies were carried out during the period of February 22 to March 4 and October 27 to November 27, 1999. Volatile organic compounds (VOCs) were measured on a 24-h basis at six sampling stations during each of the intensive periods. During the February/March study, samples were collected daily, while in the October/November study samples were collected every other day. The six intensive measurement sites represented background levels, mobile source impacts, industrial impacts, and residential exposure. High levels of NMHC were observed at all locations. NMHC concentrations ranged from 365 ppb C at Helwan to 1,848 ppb C at El Qualaly during winter, 1999 and from 461 ppb C at Kaha to 2,037 ppb C at El Qualaly during fall, 1999. El Qualaly, the site chosen to represent mobile emissions, displayed the highest average NMHC concentrations of any site, by a factor of 2 or more. The highest mobile source contributions were estimated at this site. The major contributors to NMHC at all sites were mobile emissions, lead smelting, and compressed natural gas.     

Road dust resuspension in the vicinity of limestone quarries in Jordan

Many areas in Jordan suffer from elevated levels of coarse particulate matter (PM10). One potentially significant source of the observed PM is the resuspension of road dust in the vicinity of limestone quarries. To obtain data to assess the impact from this source, PM10 road dust resuspension factors near Abusiiah, a town to the north east of Amman surrounded by many quarries and brick factories, were measured. Measurements included PM10 mass, particle size distributions, wind speed, and wind direction. The results showed that PM10 concentrations could be as high as 600 microg/m3, and most of the airborne PM is in the coarse fraction. Loading trucks play a major role in resuspending road dust, with an observed PM10 emission rate of >6000 mg/km.