Evaluation of forest nutrition based on large-scale foliar surveys: are nutrition profiles the way of the future?

This paper introduces the use of nutrition profiles as a first step in the development of a concept that is suitable for evaluating forest nutrition on the basis of large-scale foliar surveys. Nutrition profiles of a tree or stand were defined as the nutrient status, which accounts for all element concentrations, contents and interactions between two or more elements. Therefore a nutrition profile overcomes the shortcomings associated with the commonly used concepts for evaluating forest nutrition. Nutrition profiles can be calculated by means of a neural network, i.e. a self-organizing map, and an agglomerative clustering algorithm with pruning. As an example, nutrition profiles were calculated to describe the temporal variation in the mineral composition of Scots pine and Norway spruce needles in Finland between 1987 and 2000. The temporal trends in the frequency distribution of the nutrition profiles of Scots pine indicated that, between 1987 and 2000, the N, S, P, K, Ca, Mg and Al decreased, whereas the needle mass (NM) increased or remained unchanged. As there were no temporal trends in the frequency distribution of the nutrition profiles of Norway spruce, the mineral composition of the needles of Norway spruce needles subsequently did not change. Interpretation of the (lack of) temporal trends was outside the scope of this example. However, nutrition profiles prove to be a new and better concept for the evaluation of the mineral composition of large-scale surveys only when a biological interpretation of the nutrition profiles can be provided.     

Long-range atmospheric transport of three toxaphene congeners across Europe. Modeling by chained single-box FATEMOD program

Background, aims, and scope  Since toxaphene (polychlorocamphene, polychloropinene, or strobane) mixtures were applied for massive insecticide use in the 1960s to replace the use of DDT, some of their congeners have been found at high latitudes far away from the usage areas. Especially polychlorinated bornanes have demonstrated dominating congeners transported by air up to the Arctic areas. Environmental fate modeling has been applied to monitor this phenomenon using parallel zones of atmosphere around the globe as interconnected environments. These zones, shown in many meteorological maps, however, may not be the best way to configure atmospheric transport in air trajectories. The latter could also be covered by connecting a chain of simple model boxes. We aim to study this alternative approach by modeling the trajectory chain using catchment boxes of our FATEMOD model. Polychlorobornanes analyzed in biota of the Barents Sea offered one case to study this modeling alternative, while toxaphene has been and partly still is used massively at southern East Europe and around rivers flowing to the Aral Sea. Materials and methods  Pure model substances of three polychlorobornanes (toxaphene congeners P26, P50, and P62) were synthesized, their environmentally important thermal properties measured by differential scanning calorimetry, as evaluated from literature data, and their temperature dependences estimated by the QSPR programs VPLEST, WATSOLU, and TDLKOW. The evaluated property parameters were used to model their atmospheric long-range transport from toxaphene heavy usage areas in Ukraine and Aral/SyrDarja/AmuDarja region areas, through East Europe and Northern Norway (Finnmarken) to the Barents Sea. The time period used for the emission model was June 1997. Usual weather conditions in June were applied in the model, which was constructed by chaining FATEMOD model boxes of the catchment’s areas along assumed maximal air flow trajectories. Analysis of the three chlorobornanes in toxaphene mixtures function as a basis for the estimates of emission levels caused by its usage. High estimate (A) was taken from contents in a Western product chlorocamphene and low estimate (B) from mean contents in Russian polychloroterpene products to achieve modeled water concentrations. Bioaccumulation to analyzed lipid of aquatic biota at the target region was estimated by using statistical calculation for persistent organic pollutants in literature. Results  The results from model runs A and B (high and low emission estimate) for levels in sea biota were compared to analysis results of samples taken in August 1997 at Barents Sea. The model results (ng g⁻¹ lw): 4–95 in lipid of planktovores and 7–150 in lipid of piscivores, were in fair agreement with the analysis results from August 1997: 21–31 in Themisto libellula (chatka), 26–42 in Boreocadus saida (Polar cod), and 5–27 in Gadus morhua (cod) liver. Discussion  The modeling results indicate that the application of chained simple multimedia catchment boxes on predicted trajectory is a useful method for estimation of volatile airborne persistent chemical exposures to biota in remote areas. For hazard assessment of these pollutants, their properties, especially temperature dependences, must be estimated by a reasonable accuracy. That can be achieved by using measurements in laboratory with pure model compounds and estimation of properties by thermodynamic QSPR methods. The property parameters can be validated by comparing their values at an environmental temperature range with measured or QSPR-estimated values derived by independent methods. The chained box method used for long-range air transport modeling can be more suitable than global parallel zones modeling used earlier, provided that the main airflow trajectories and properties of transported pollutants are predictable enough. Conclusions  Long-range air transport modeling of persistent, especially photo-resistant organic compounds using a chain of joint simple boxes of catchment’s environments is a feasible method to predict concentrations of pollutants at the target area. This is justified from model results compared with analytical measurements in Barents Sea biota in August 1997: three of six modeled values were high and the other three low compared to the analysis results. The order of magnitude level was similar in both modeled (planktovore and piscivore) and observed (chatka and polar cod) values of lipid samples. The obtained results were too limited to firm validation but are sufficient to justify feasibility of the method, which prompts one to perform more studies on this modeling system. Recommendations and perspectives  For assessment of the risk of environmental damages, chemical fate determination is an essential tool for chemical control, e.g., for EU following the REACH rules. The present conclusion of applicability of the chained single-box multimedia modeling can be validated by further studies using analyses of emissions and target biota in various other cases. To achieve useful results, fate models built with databases having automatic steps for most calculations and outputs accessible to all chemical control professionals are essential. Our FATEMOD program catchments at environments and compound properties listed in the database represent a feasible tool for local, regional, and, according our present test results, for global exposure predictions. As an extended use of model, emission estimates can be achieved by reversed modeling from analysis results of samples corresponding to the target area. This article is dedicated to the memory of Professor Alexander B Terentiev (who passed away in November 2006), our true friend. With his Institute of Organo-Element Compounds, Russian Academy of Science, Moscow, he was an important main organizer of the six joint Finnish–Russian seminars (every third year since 1989) on the field (‘Chemistry and Ecology of Organo-Element Compounds’). He prompted us especially to search properties and environmental fates for various polyhalogen compounds. We remember him for his friendly character and great sense of humor.     

Study of organochlorine pollutants in snow at North Pole and comparison to the snow at north, central and south Finland

Organic pollutants, especially polychlorinated hydrocarbons, phenols, guaiacols and catechols have been studied by analyses of snow samples from North Pole, May 1984. All of these pollutants were below the limit of determination which was estimated to be as fallout 0.1–0.05 μg/m² for individual compounds. For comparison, snow samples from Central Finland and South Finland 1983–1985 also showed non-detectable levels of chlorinated hydrocarbons but well measurable levels of chlorophenol compounds which were significantly higher at urban (heavy traffic) than rural and higher at South than Central Finnish places, respectively. One sample from Lapland, North Finland 1985, however, had no measurable amounts of chlorophenols like the North Pole sample.     

Measurements and Modelling of Air Pollution in a Street Canyon in Helsinki

A measuring campaign was conducted in the street canyon 'Runeberg street' in Helsinki in 1997. Hourly concentrations of carbon monoxide (CO), nitrogen oxides (NO_X), nitrogen dioxide (NO₂) and ozone (O₃) were measured at the street and roof levels, and the relevant hourly meteorological parameters were measured at the roof level. The hourly street level measurements and on-site electronic traffic counts were conducted during the whole year 1997, and roof level measurements were conducted during approximately two months, from 3 March to 30 April in 1997. The Operational Street Pollution Model (OSPM) was used to calculate the street concentrations and the results were compared with the measurements. The overall agreement between measured and predicted concentrations was good for CO and NO_x, but the model slightly overestimated the measured concentrations of NO₂. The database, which contains all measured and predicted data, is available for a further testing of other street canyon dispersion models.     

Uncertainty in health risks due to anthropogenic primary fine particulate matter from different source types in Finland

The emission-exposure and exposure-response (toxicity) relationships are different for different emission source categories of anthropogenic primary fine particulate matter (PM_2.5). These variations have a potentially crucial importance in the integrated assessment, when determining cost-effective abatement strategies. We studied the importance of these variations by conducting a sensitivity analysis for an integrated assessment model. The model was developed to estimate the adverse health effects to the Finnish population attributable to primary PM_2.5 emissions from the whole of Europe. The primary PM_2.5 emissions in the whole of Europe and in more detail in Finland were evaluated using the inventory of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario model (FRES), respectively. The emission-exposure relationships for different primary PM_2.5 emission source categories in Finland have been previously evaluated and these values incorporated as intake fractions into the integrated assessment model. The primary PM_2.5 exposure-response functions and toxicity differences for the pollution originating from different source categories were estimated in an expert elicitation study performed by six European experts on air pollution health effects. The primary PM_2.5 emissions from Finnish and other European sources were estimated for the population of Finland in 2000 to be responsible for 209 (mean, 95% confidence interval 6–739) and 357 (mean, 95% CI 8–1482) premature deaths, respectively. The inclusion of emission-exposure and toxicity variation into the model increased the predicted relative importance of traffic related primary PM_2.5 emissions and correspondingly, decreased the predicted relative importance of other emission source categories. We conclude that the variations of emission-exposure relationship and toxicity between various source categories had significant impacts for the assessment on premature deaths caused by primary PM_2.5.     

Size-exclusion chromatographic study of ECF and TCF softwood kraft pulp bleaching liquors

Background, aims, and scope  

Currently, elemental chlorine-free (ECF) and totally chlorine-free (TCF) bleaching systems are widely used for pulp production. Low and medium molecular weight lignin break-down products are known to have harmful effects on the environment. According to some recent results, also high molecular weight (HMW) material consisting mainly of lignin and carbohydrates may cause toxic effects to the environment. For these reasons, toxicity and structure studies of HMW materials are of great importance. This investigation is a part of a larger project to obtain more structure information of HMW materials and toxicity of ECF and TCF bleaching effluents. Size-exclusion chromatography (SEC) has been commonly used for the characterization of organic macromolecules such as lignin, but to our knowledge, no reports have appeared dealing with the comparison of SEC of ECF and TCF bleaching liquors. The aim of the present study was to get more information about the molecular weight distribution (MWD) of HMW fractions of waste liquors from ECF and TCF bleaching sequences by SEC.     

Are N and S deposition altering the mineral composition of Norway spruce and Scots pine needles in Finland?

Data from a large-scale foliar survey were used to calculate the extent to which N and S deposition determined the mineral composition of Scots pine and Norway spruce needles in Finland. Foliar data were available from 367 needle samples collected on 36 plots sampled almost annually between 1987 and 2000. A literature study of controlled experiments revealed that acidifying deposition mediates increasing N and S concentrations, and decreasing Mg:N and Ca:Al ratios in the needles. When this fingerprint for N and S elevated deposition on tree foliage was observed simultaneously with increased N and S inputs, it was considered sufficient evidence for assuming that acidifying deposition had altered the mineral composition of tree needles on that plot in the given year. Evidence for deposition-induced changes in the mineral composition of tree foliage was calculated on the basis of a simple frequency model. In the late eighties the evidence was found on 43% of the Norway spruce and 27% of Scots pine plots. The proportion of changed needle mineral composition decreased to below 8% for both species in the late nineties.     

Evaluating the role of desorption in bioavailability of sediment-associated contaminants using oligochaetes, semipermeable membrane devices and Tenax extraction

The success of the rapidly desorbing fraction as an available fraction was challenged by using sediment ingesting and non-ingesting oligochaetes (Lumbriculus variegatus) together with passive samplers (semipermeable membrane devices, SPMDs) in accumulation and kinetic modelling exercises for carbon-14 labelled model compounds (pyrene, benzo[a]pyrene and 3,4,3',4'-tetrachlorobiphenyl). Passive samplers clearly produced lower uptake rate constants and steady state factors than either of the oligochaete treatments when residue concentrations were based on animal lipid or total SPMD weight. The rapidly desorbing chemical fractions in sediments did not show a significant relationship with the biota sediment accumulation factors or SPMD accumulation factors. A distinctly better relationship was observed between the accumulation factors and the desorption rate constants. The results support the assumption that desorption plays an important role in bioavailability, although animal behaviour and the diffusional limitations of hydrophobic contaminants in sediment together probably affect the actual available pool.     

Sparse regression for analyzing the development of foliar nutrient concentrations in coniferous trees

Analyzing and predicting the development of foliar nutrient concentrations are important and challenging tasks in environmental monitoring. This article presents how linear sparse regression models can be used to represent the relations between different foliar nutrient concentration measurements of coniferous trees in consecutive years. In the experiments the models proved to be capable of providing relatively good and reliable predictions of the development of foliage with a considerably small number of regressors. Two methods for estimating sparse models were compared to more conventional linear regression models. Differences in the prediction accuracies between the sparse and full models were minor, but the sparse models were found to highlight important dependencies between the nutrient measurements better than the other regression models. The use of sparse models is, therefore, advantageous in the analysis and interpretation of the development of foliar nutrient concentrations.     

Oil residues in Baltic sediment,mussel and fish. I. Development of the analysis methods

Sediment, sediment trap, Mytilus, Macoma and flounder samples from Northern Baltic (Finnish archipelago) have been analyzed for their contents of aliphatic and aromatic hydrocarbons. Androstane and hexaethylbenzene were used as internal standards. The analysis procedure consisted of alkaline degradation of fat, column fractionation of the two residue groups and final determination by glass capillary gas chromatography with FID for aliphatic hydrocarbon group and with mass spectrometry for non-polar aromatic residue group. The latter group was also determined by high pressure liquid chromatography. The residues due to oil pollution were distinguished from compounds of pure natural origin on the basis of statistical treatment of the determination results.