Assessment of natural radiation exposure levels and mass attenuation coefficients of lime and gypsum samples used in Turkey

The activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K in lime and gypsum samples used as building materials in Turkey were measured using gamma spectrometry. The mean activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were found to be 38 ± 16, 20 ± 9, and 156 ± 54 Bq kg^???1 for lime and found to be 17 ± 6, 13 ± 5, and 429 ± 24 Bq kg^???1 for gypsum, respectively. The radiological hazards due to the natural radioactivity in the samples were inferred from calculations of radium equivalent activities (Ra_eq), indoor absorbed dose rate in the air, the annual effective dose, and gamma and alpha indices. These radiological parameters were evaluated and compared with the internationally recommended limits. The experimental mass attenuation coefficients (μ/ρ) of the samples were determined in the energy range 81–1,332 keV. The experimental mass attenuation coefficients were compared with theoretical values obtained using XCOM. It is found that the calculated values and the experimental results are in good agreement.     

Enhancement of occupational health and safety requirements in chemical tanker operations: The case of cargo explosion

Operational precautions for chemical tankers are vitally important in reducing the potential threat to shipboard crew by products carried. This paper enhances the International Safety Management (ISM) code in compliance with Occupational Health and Safety Management Systems (OHSAS 18001:2007) requirements in respect to operational constraints related to chemical tankers. As research methodology, Fuzzy Axiomatic Design (FAD) and Analytic Hierarchy Process (AHP) are referred to redesign the extended ISM code procedure, which identifies key points for occupational accident prevention on board chemical tankers. To illustrate the expected benefits of an extended ISM code procedure, the principle root causes of chemical tanker explosion are also discussed. In particular, the main results of the case study highlight the urgent need to ensure the competency of shipboard personnel and their familiarization with the characteristics of chemical cargos under differing circumstances. The outcomes set out in this paper contribute to regulatory compliance and to the management of occupational health and safety requirements on board chemical tankers.     

Amygdalin in bitter and sweet seeds of apricots

Hydrogen cyanide (HCN) poisoning due to amygdalin (AMY) in apricot seeds is one of the public health issues in Turkey. The aim of this study was to investigate the AMY content of 13 different apricot seeds including bitter and sweet ones, and which are either sulfurized or roasted. The AMY content was determined by a high-performance liquid chromatography. Release of HCN was predicted and total amount of seeds which can cause poisoning was calculated. The mean AMY content of bitter seeds was 26 ± 14 mg g^?1 and that of sweet seeds was 0.16 ± 0.09 mg g^?1. The consumption of small amounts of bitter seeds may cause cyanide poisoning.     

Designing of integrated quality and safety management system (IQSMS) for shipping operations

This paper proposes a systematic approach for exploring the compliance level of the international safety management (ISM) code with the ISO 9001:2000 in order to structure an integrated quality and safety management system (IQSMS) for shipping operations. Multi-attribute fuzzy axiomatic design (MA-FAD) is determined as a suitable research methodology for the focused problem. To illustrate the proposed approach, a casualty onboard oil tanker ship is analysed; moreover, the potential advantages of the IQSMS in operational level are underlined. The outcomes of this research originally ensure decision aid for the relevant executives in ship management companies who eagerly insist to implement quality integrated ISM code.     

How vital is the "lack of funding" in effective environmental management in Turkey?

The conflict experienced in Turkey between adequate legal and legislative arrangements with weak capabilities of policy implementation and enforcement is a typical scenario experienced in developing countries. The difficulties faced in environmental management is increased by funding issues. Although environmental management is directly influenced by problems associated with the distribution of public funds, lack of funding is not the sole reason responsible for the mismanagement of resources. The paper seeks to answer whether the lack of funding allocated to ameliorate environmental degradation and pollution is the main reason for an environmental crisis situation in Turkey. Turkey needs to ensure implementation of the basic obligations stated in its environmental policy with respect to national and international issues. Specific obstacles Turkey needs to overcome for more effective environmental management will be examined within this context.     

Equilibrium and kinetic studies on biosorption of Hg(II), Cd(II) and Pb(II) ions onto microalgae Chlamydomonas reinhardtii

The microalgae Chlamydomonas reinhardtii was used for the biosorption of Hg(II), Cd(II) and Pb(II) ions. The maximum adsorption of Hg(II) and Cd(II) ions on Chlamydomonas reinhardtii biomass was observed at pH 6.0 and the corresponding value for Pb(II) ions was 5.0. The biosorption of Hg(II), Cd(II) and Pb(II) ions by microalgae biomass increased as the initial concentration of Hg(II), Cd(II) and Pb(II) ions increased in the biosorption medium. The maximum biosorption capacities of microalgae for Hg(II), Cd(II) and Pb(II) ions were 72.2+/-0.67, 42.6+/-0.54 and 96.3+/-0.86 mg/g dry biomass, respectively. The affinity order for algal biomass was Pb(II)>Hg(II)>Cd(II). FT-IR analysis of algal biomass revealed the presence of amino, carboxyl, hydroxyl and carbonyl groups, which were responsible for biosorption of metal ions. Biosorption equilibrium was established in about 60 min and the equilibrium was well described by the Freundlich biosorption isotherms. Temperature change in the range of 5-35 degrees C did not affect the biosorption capacity. The microalgae could be regenerated using 0.1 M HCl, with up to 98% recovery, which allowed the reuse of the biomass in six biosorption-desorption cycles without any considerable loss of biosorption capacity.     

Indoor and outdoor radon measurements at lung cancer patients’ homes in the dwellings of Rize Province in Turkey

In this study, indoor and outdoor radon (²²²Rn) surveys were carried out in the summer and winter seasons in homes of one hundred lung cancer patients in the year 2013–2014. The aim was to investigate the relationship between radon and cancer patients. Lung cancer patients completed a questionnaire concerning their living environment, various physical parameters and living habits. Pearson correlation and t tests revealed no meaningful results between radon concentrations, on one hand, and environmental and personal living habits, on the other hand. Consequently, the BEIR VI model was adapted and ²²²Rn exposure was estimated to be responsible for about 12% of the lung cancer incidences in the winter season and around 5% in the summer season in the Rize Province. However, due to the limited number of data and numerous parameters that could lead to lung cancer, the estimations done with the model should be taken very lightly. The annual effective doses due to inhalation of indoor and outdoor ²²²Rn were estimated to be, respectively, 1.43 and 0.94 mSv y^?1. The indoor and outdoor annual effective doses were, respectively, close and below the world annual effective dose (1.3 mSv y^?1). At the district level, the indoor annual effective dose equivalent in the ?yidere district was 4.52 mSv y^?1, which was 3.5 times greater than the world average. The number of patients in the majority of the houses in this district was more than one.     

Synthesis of Polylactide-b-Poly (Dimethyl Siloxane) Block Copolymers and Their Blends with Pure Polylactide

The synthesis of polylactide (PLA)-b-poly (dimethyl siloxane) (PDMS) linear block copolymers and their use in blends with pure-PLA are described. PLA-b-PDMS linear block copolymers were obtained by the transesterification reaction in chloroform solution between poly(dimethyl siloxane) bis (2-aminopropyl ether) (molecular weight 2,000?Da) with PLA in the presence of stannous octoate. Molecular weights (Mw) of the block copolymers were varied from 53,800 to 63,600?Da while that of pristine PLA was 73,600?Da. The copolymers obtained were purified by fractional precipitation and then characterized by ¹H NMR, FTIR, GPC, viscometry and DSC techniques. Blends of pure PLA with PLA-b-PDMS block copolymers displayed improved elastic properties (elongation up to 140%) compared to pure PLA (elongation ~9%). Thermal, mechanical and morphological characterization of the blends were also conducted.     

Analysis of airborne pollen fall in Nicosia (Cyprus)

Airborne pollen distribution in the city of Nicosia (Cyprus) was measured volumetrically during two consecutive years 2007–2008 on weekly basis using Lanzoni trap (Lanzoni VPPS 2000). A total of 7,880 pollen grains/m³ belonging to 44 taxa, in 2007 were 3,593 pollen grains/m³ and in 2008 it was 4,287 pollen grains/m³, were determined. Out of these, 25 belonged to the arboreal and 19 to the non-arboreal taxa. At the end of 2 years, total pollen counts were 78.76% arboreal, 19.32% non-arboreal, and 1.92% unidentified taxa. The number of pollen in the arboreal plants followed the trend as Pinaceae (29.96%), Cupressaceae/Taxaceae (18.33%), Olea europaea L. (6.92%), and Quercus spp. (4.92%), and for non-arboreal representatives, these were Poaceae (8.46%), Chenopodiaceae/Amaranthaceae (2.61%), Plantago spp. (1.69%), and Parietaria spp. (1.51%). The distribution of pollen in the atmosphere of Nicosia followed the trend as March, April, May, and June.     

Geological and technical characterisation of Iscehisar (Afyon-Turkey) marble deposits and the impact of marble waste on environmental pollution

Turkey, due to its location in the Alpine-Himalayan belt, has numerous marble deposits. More than 250 marble types with different colours and patterns have been produced from these deposits and one hundred of these are well known around the world. One such well-known marble type is Afyon-Iscehisar. Afyon-Iscehisar is Palaeozoic in age and has been quarried since the era of the Roman empire. The Afyon region is known as one of the most important marble production and processing centres in Turkey. The Afyon province, which possesses 3.5% of exploitable marble reserves (3,872,000,000 tonne) in Turkey, yields 9% of the total marble block production. The 409 marble processing plants in Afyon produce 19% of the total slab in Turkey. As a result of marble production activities, approximately 340,000 tonne of marble waste has accumulated in the area. While some of these unshaped marble blocks are re-used and returned to the economy, the majority are discarded. There are two waste marble storage fields located in the Afyon-Iscehisar region. All of the solid and fine-grained marble waste is stored in waste marble storage fields in Susuz Bo?az? and in the nearby Iscehisar marble quarries. The ecological effects of the marble waste, which were once discharged everywhere and exhibited visual pollution, has now been reduced to a minimal level.