Striking the balance: Challenges and perspectives for the protected areas network in northeastern European Russia

Increasing anthropogenic pressure on the largest remaining tracts of old-growth boreal forest in Europe necessitates additional conservation of ecosystems and biodiversity in northeastern European Russia. In a regional network comprising 8 % of the Nenets Autonomous District and 13.5 % of the Komi Republic, 248 areas have varying protected statuses as state nature reserves (zapovedniks), national parks, reserves/sanctuaries (zakazniks), or natural monuments. Due to increased natural resource extraction in this relatively pristine area, designation of additional protected areas is critical for the protection of key ecological sites. The history of ecological preservation in these regions is herein described, and recent recommendations for incorporating additional ecologically representative areas into the regional network are presented. If the protected area network can be expanded, the overall environmental stability in these globally significant ecosystems may remain intact, and can help Russia meet the 2020 Aichi conservation targets, as set forth by the Convention of Biological Diversity.     

Ni and Cu migration and accumulation in forest ecosystems on the Kola Peninsula

Biogeochemical cycles of Ni and Cu in pine forests on the northern tree line (Kola peninsula) in the background and industry-disturbed areas have been investigated. Total, bio-available and exchangeable concentrations of Ni and Cu in the soil, atmospheric Ni and Cu fluxes and soil water migration, and metal uptake by plants are considered. In the polluted area, forest ecosystems are seen as biogeochemical barriers which may attenuate intensity of Ni and Cu migration down the soil profile. A quantitative assessment is given of the role of dominating forest plants and soil horizons as barriers to heavy metal fluxes.     

Multi-component assessment of worker exposures in a copper refinery. Part 2. Biological exposure indices for copper, nickel and cobalt

Urinary copper (Cu), nickel (Ni) and cobalt (Co) concentrations were determined for 127 Cu refinery workers (40 females, 87 males), with values of the 95% upper confidence interval of the geometric mean in nmol per mmol creatinine of 89 (Ni), 42 (Cu) and 3.4 (Co) for electrorefinery workers. In the pyrometallurgical departments, the corresponding concentrations were 37 (Ni), 99 (Cu) and 11 (Co). Female workers had higher Co urinary concentrations than males (p< or = 0.05) while no gender difference was observed for Cu and Ni. Inter-elemental correlations were moderate to weak. Based on the inhalable aerosol levels reported previously for the same workers, the observed urinary Cu concentrations were considerably lower than expected, relative to Co and Ni. This is interpreted in terms of the current understanding of Cu homeostasis.     

Model of the number of species in an ecosystem in dependence on geographical latitude

An equation is developed for the dependence of the maximum number of species in an ecosystem on temperature. A comparison with observations for marine ecosystems in different latitudes suggests an excellent agreement of theory with observations for the temperature interval 0–30°C.     

Retention time profiling of all 136 tetra- through octa- chlorinated dibenzo-p-dioxins and dibenzofurans on a variety of Si-Arylene gas chromatographic stationary phases

The applicability of three different Silphenylene Silicone co-polymer (Si-Arylene) GC stationary phases (J&W Scientific DB-5ms, Varian VF-5ms, and VF-Xms) has been evaluated for the separation of all 136 tetra- through the octa- chlorinated dibenzo-p-dioxins (PCDD) and chlorinated dibenzofurans (PCDF) from closely eluting isomers using gas chromatography/high resolution mass spectrometry (GC/HRMS). Their relative performance data are compared to the “conventional” 5% diphenyl 95% dimethylpolysiloxane GC column (Supelco Equity-5) and to each other based on absolute retention times, visualized mass chromatograms, and the separation of 2,3,7,8-substituted isomers. VF-Xms GC column was able to demonstrate a better performance towards separation of 2,3,7,8-substituted PCDD/PCDF compared to other Si-Arylene GC columns tested, where only 2,3,4,7,8-PnCDF can not be resolved from 1,2,3,6,9-PnCDF and 2,3,4,6,7,8-/1,2,3,6,8,9-HxCDF and 1,2,3,7,8,9-/1,2,3,4,8,9-HxCDF can be at least partially resolved. These data suggest that the development of a single GC column for the separation of all 17 2,3,7,8-substituted dioxins and furans is feasible, which therefore could be used as a standard tool for the PCDD/PCDF methods globally including USEPA methods 1613b, 8290A, 8280B, European Standard Method EN 1948, Canadian methods DFPCB-E3418, EPS 1/RM/19, Japanese methods JIS K0311 and JIS K0312. Having one specific GC column to separate all 2,3,7,8-substituted PCDD/PCDF will significantly improve the data quality, comparability by the various methods and assessment techniques while simultaneously leading to a more cost and time efficient operation.     

A Gradient Study of 34 Elements in the Vicinity of a Copper-Nickel Smelter in the Kola Peninsula

Concentrations of 34 elements determined by ICP mass spectrometry were studied in surface soil and vegetation along a north–south gradient through the Pechenganickel smelter complex in Kola peninsula, northern Russia. Strong influence from the smelter was evident for Fe, Co, Ni, and Cu, mainly associated with dry deposition of large particles. Also for As, Se, Mo, Sb, Te, Bi, and Pb the smelter or associated sources appeared to be distinct contributors of contamination consisting presumably of smaller particles. Significant but less distinct effects leading to enhanced concentration levels were observed for P, S, V, Cr, Zn, and Tl. In the case of Mn, Rb, Sr, Cs, and Ba the concentrations in vegetation were generally lower near the source, which may be due to cation exchange with protons or heavy metal cations in the soil and subsequent leaching from the root zone. For Li, Be, B, Na, Mg, Al, Ca, Y, Cd, La, Th, and U no particular influence from the smelter complex was observed. Some characteristic differences observed in element concentrations in different plant species and between different years of Pinus sylvestris needles are discussed. The high concentrations observed for many trace elements in the humus horizon indicates that it acts as an active biogeochemical barrier against downward transport of these elements.     

The heterogeneous composition of working place aerosols in a nickel refinery: a transmission and scanning electron microscope study

Size, morphology and chemical composition of individual aerosol particles collected in a nickel refinery were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis (EDX). The phase composition was determined by selected area electron diffraction and EDX in a transmission electron microscope. Most particles are heterogeneous on a nanometer scale and consist of various phases. Nickel phases observed in the roasting and anode casting departments include metallic nickel, bunsenite (NiO), trevorite (Ni,Cu)Fe2O4, heazlewoodite Ni3S2, godlevskite (Ni,Cu)9S8, orthorhombic NiSO4 and an amorphous Ni,Cu.Al,Pb sulfate of variable composition. Additional phases encountered include corundum (Al2O3), murdochite (PbCu6O8), hexagonal Na2SO4, anhydrite (CaSO4), graphite (C) and amorphous carbon. The implications of the occurrence of the different Ni phases and their nanometer size for the study of adverse health effects are explored.     

Assessment of Allowable Thermal Load for a River Reservoir Subject to Multi-Source Thermal Discharge from Operating and Designed Beloyarsk NPP Units (South Ural,Russian Federation)

This study develops a quantitative approach to the establishment of a maximum allowable thermal discharge into a freshwater body (the Beloyarsk Reservoir) incorporated in the once-through cooling technology at the Beloyarsk nuclear power plant (NPP) (South Urals, Russian Federation). The study is based on a 3-D hydrodynamic model, embracing water circulation, heat transfer, and ice-cover formation in the Beloyarsk Reservoir. The model is driven by atmospheric forcing, river runoff, and the discharge/intake of NPP cooling water. It was used to simulate the horizontal and vertical distribution of water temperature under the effect of the operation of existing (number 3) and anticipated (numbers 4 and 5) nuclear power units. The model is validated by the comparison of the computation results with observed water temperature distribution and ice-cover configuration obtained with remote sensing techniques. The model was also used to predict the future evolution of water temperature after the launching of two new power units, which, having a common cooling system, may affect each other. It was shown that the first of the new units, no. 4, will not dramatically affect the existing thermal conditions in the reservoir, while launching one more unit, no. 5, will apparently result in overheating of the reservoir water in response to the greater volume of cooling-water discharge from the two power units. Because of a specific configuration of the recirculation flow, the reservoir may fail to cope with the dissipation of the generated heat, leading to a steady (uncontrolled) rise of water temperature in the inlet channel to one of the power units. This will reduce the potential of NPP, using the once-through cooling technology, and will most likely have an adverse effect on the survival of aquatic organisms in the Beloyarsk Reservoir. Therefore, some other environment-saving technologies must be developed for removing surplus heat from the unit no. 5 of the Beloyarsk NPP.     

Influence of spruce and pine on the acidity and composition of atmospheric fallout in north taiga forests of an industrially developed region

The ideas concerning the spatial and temporal variation of acidity and composition of atmospheric fallout in forests of the boreal zone are discussed. The role played by the atmospheric component in the functioning of these forests depends on the acidity and composition of fallout and the extent of their transformation by the biocenosis. The most profound transformation of fallout occurs during the growing season. In spaces between crowns, the corresponding changes are atmogenic; in undercrown areas, they are obviously biogenic (autogenic). Spruce transforms the fallout more intensively than pine. Under conditions of industrial pollution, the atmobiogenic character of fallout is supplemented with a technogenic component, as its acidity and concentration of pollutants and other elements sharply increase. Concentrations of principal cations reach high values because of their leaching from the crown by acid precipitation. The traditional concept of atmospheric load on boreal forests should be reconsidered taking into account their spatial structure.