Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.

     

Changes in the Distribution of Broadleaf Tree Species in the Central Part of the Southern Urals since the 1970s

Russian Journal of Ecology - Changes in the distribution of broadleaf tree species—Tilia cordata Mill., Quercus robur L., Acer platanoides L., and Ulmus glabra Huds.—in the central part...     

Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Dyes removal from water using polymeric nanocomposites: a review

Environmental Chemistry Letters - Most dyes are pollutants that should be removed from waters due to their mutagenic and carcinogenic properties, requiring advanced adsorption methods. Here, we...     

Assessment of the State of Lung Lichen, <Emphasis Type="Italic">Lobaria pulmonaria</Emphasis> (L.) Hoffm., in Forest Communities with Different Times Since Disturbance in the Northeast of European Russia

Quantitative parameters of cenopopulations of Lobaria pulmonaria, an endangered cyanolichen, have been studied in spruce phytocenoses of Karelia recovering after disturbance through the successional stage of aspen stands for a period ranging from 80 to 450 years. The results show that, as the time since disturbance increases, the total number of L. pulmonaria thalli and the number of colonized substrate units increase as well, with no stabilization of these parameters being observed in the series of communities studied. The total area of thalli in the phytocenoses is restored within approximately 200 years after the last disturbance. In old-growth forests (>400 years), L. pulmonaria thalli colonize a broad spectrum of tree species in different life states, including lower branches of young spruce trees. Even if they serve as temporary substrates, this can markedly strengthen the potential of the species for further expansion within the community in case of shortage in the main phorophyte (aspen). Thus, the proportion of regressive populations decreases, while that of colonizing populations increases, which is indicative of successful reproduction of the species.     

Magnetotactic bacteria: Characteristics and environmental applications

• Magnetotactic bacteria (MTB) synthesize magnetic nanoparticle within magnetosomes. • The morphologic and phylogenetic diversity of MTB were summarized. • Isolation and mass cultivation of MTB deserve extensive research for applications. • MTB can remove heavy metals, radionuclides, and organic pollutants from wastewater. Magnetotactic bacteria (MTB) are a group of Gram-negative prokaryotes that respond to the geomagnetic field. This unique property is attributed to the intracellular magnetosomes, which contains membrane-bound nanocrystals of magnetic iron minerals. This review summarizes the most recent advances in MTB, magnetosomes, and their potential applications especially the environmental pollutant control or remediation. The morphologic and phylogenetic diversity of MTB were first introduced, followed by a critical review of isolation and cultivation methods. Past research has devoted to optimize the factors, such as oxygen, carbon source, nitrogen source, nutrient broth, iron source, and mineral elements for the growth of MTB. Besides the applications of MTB in modern biological and medical fields, little attention was made on the environmental applications of MTB for wastewater treatment, which has been summarized in this review. For example, applications of MTB as adsorbents have resulted in a novel magnetic separation technology for removal of heavy metals or organic pollutants in wastewater. In addition, we summarized the current advance on pathogen removal and detection of endocrine disruptor which can inspire new insights toward sustainable engineering and practices. Finally, the new perspectives and possible directions for future studies are recommended, such as isolation of MTB, genetic modification of MTB for mass production and new environmental applications. The ultimate objective of this review is to promote the applications of MTB and magnetosomes in the environmental fields.     

Global Warming-Related Dynamics of Infection by Eubothrium rugosum (Plathelminthes,Cestoda) in the Burbot from the Rybinsk Reservoir

Russian Journal of Ecology - Abstract—Long-term observations (1968–2019) on the dynamics of infection by the cestode Eubothrium rugosum in the burbot (Lota lota) have been performed in...     

环境监测中重金属污染的控制对策分析

在我国社会经济快速发展的过程中,人们对自然资源需求无度,造成生态环境破坏问题非常严重。通过环境监测可以及时分析空气中有毒有害的物质成分,并且对环境污染问题进行及时有效的解决。但是在监测的过程中所采用大量的空气试剂很容易造成环境二次污染等问题,为此必须要积极加强对环境监测中重金属污染的合理控制,对空气试剂产生的大量废弃物进行及时的回收处理,从而有效避免出现二次污染的情况,充分发挥环境监测的作用。     

The passion bug: How and when do leaders inspire work passion?

Drawing from signaling theory, we propose a work passion transfer model where leaders' passion is transmitted to employees through the former's leadership style and is contingent on employees' perceived importance of performance to self-esteem (IPSE). Data from 201 supervisor–employee dyads from the health-care industry show that leaders' harmonious passion led to employees' harmonious passion through charismatic leadership, whereas contingent reward leadership accounted for the transfer of obsessive passion; IPSE did not play a moderating role for either form of passion. Results from a supplementary study further reveal that the link between leadership and employee passion operated through employees' perception of leader passion and that employees' IPSE accentuated for the relationship between perceived leader obsessive passion and employees' obsessive passion. This study advances research in work passion, leadership, and signaling theory and provides important implications for managerial practice.     

Usability of non-standard lower anchor configurations for child restraint system (CRS) installation

Abstract

Objectives: The objective of this study was to determine whether the amount of tension required for proper child restraint system (CRS) installation varies with lower anchor spacing and to determine whether nonexperts can produce adequate tension on wider-than-standard lower anchor configurations.

Methods: CRSs were installed by certified child passenger safety technicians (CPSTs; n?=?6 subjects, n?=?72 installations) and nonexperts (n?=?30 subjects, n?=?120 installations) on a mock-up vehicle seat fixture with lower anchors set at 11 (standard), 15, 19, and 23 in. apart from one another. Each CPST installed a rear-facing (RF) infant base, RF convertible, and forward-facing (FF) convertible into each of the 4 spacing configurations in random order. The CPSTs were instructed to tighten the lower connector strap until the tension was exactly at the threshold between passing and failing the 1-in. test. Each nonexpert installed one CRS model into all 4 spacing conditions in random order. Nonexperts were instructed to install the CRS to the best of their ability. The tension produced on the lower connector strap was recorded via load cell in the lower anchor assembly of the vehicle seat. Resultant tension magnitudes were compared across spacing conditions using matched pair t-tests. The CPSTs’ mean 1-in. test threshold values were compared to tensions produced by nonexperts. Installations were visually evaluated for errors and qualitative usability feedback was collected via survey.

Results: CPSTs installed the infant base with higher tensions in the 15-, 19-, and 23-in. configurations compared to the standard 11-in. configuration (P = .034, .032, and .003, respectively). The nonexperts installed the infant base with higher tension in the 15- and 23-in. configurations compared to the 11-in. configuration (P = .004 and .026, respectively). The RF convertible and FF convertible installations showed no significant differences in tension among any of the spacing configurations for either group. Only 19% of the nonexperts’ installations were tight enough to pass CPST thresholds, and the pass rate did not vary with respect to lower anchor spacing. In feedback surveys, the nonexpert group did not show a consistent preference for either standard or wider-than-standard lower anchor configurations.

Conclusions: The amount of tension required to pass the 1-in. rule did not vary with lower anchor spacing configurations for the RF and FF convertible CRS, but the infant base required more tension in wider anchor configurations. Nonexperts tended to produce less than ideal tension in all configurations, although their tension magnitudes increased for the infant base in wider configurations.