Radiostrontium monitoring of bivalves from the Pacific coast of eastern Japan

In early April 2011, radiostrontium was accidentally released from the Fukushima Daiichi Nuclear Power Plant to the Pacific coast of eastern Japan. We developed a simple procedure to analyze radiostrontium levels in marine mussels (Septifer virgatus) and seawater using crown ether (Sr Resin; Eichrom). Then, we used our method to describe the spatial and temporal distribution of radiostrontium in mussels and seawater on the Pacific coast of eastern Japan from 2011 to 2013 and for 2015. Activity of ⁹⁰Sr in mussels and seawater decreased with distance from the Fukushima Daiichi Nuclear Power Plant and between 2011 and 2013 tended to be higher in areas south of the Fukushima Daiichi Nuclear Power Plant than to the north of it. Activity in mussels and seawater also tended to decrease from 2011 to 2013 and by 2015 had reached levels experienced prior to the Fukushima accident. Our results suggest that radiostrontium discharged from the Fukushima Daiichi Nuclear Power Plant was dispersed by coastal currents in a southerly direction along the Pacific coast of eastern Japan from 2011 to 2013, following which its activity decreased to background levels by 2015.     

Relationship between the riverine nitrate–nitrogen concentration and the land use in the Teshio River watershed, North Japan

The present research investigated the relationship between nitrate–nitrogen (NO₃–N) in river water and the land use/land cover (hereafter, land use) in the Teshio River watershed located in northern Hokkaido island to understand the effect of human activities such as agriculture, forestry, industry, and urbanization in the drainage basin on the river ecosystem quality and services. River water was sampled at nine points seasonally during a 2-year period and the nutrients concentration was measured. Land use profiles were estimated at two spatial scales, riparian and sub-catchment, for each sampling station. The spatial pattern of water quality in the Teshio River showed increased NO₃–N levels associated with agriculture and urban expansion, and forest reduction in the watershed. Land use at the riparian scale closely reflected that at the sub-catchment scale, which masked the unique riparian buffer effect on the river water condition. The increased agricultural and reduced forest area in the riparian zone, especially in the upper middle reach, could be a possible reason for a decline of ecosystem service for the provisioning of clean water and habitat for aquatic organisms. Measures towards sustainable and more nature-friendly agricultural management are necessary in the area to protect the Teshio River ecosystem and its ecosystem services.     

Evaluation of commercial landscaping mulch for possible contamination from CCA

Wood treated with chromated copper arsenate (CCA) is found in construction and demolition (C&D) debris, and a common use for wood recycled from C&D debris is the production of mulch. Given the high metals concentrations in CCA-treated wood, a small fraction of CCA-treated wood can increase the metal concentrations in the mulch above regulatory thresholds. The objective of this study was to determine the extent of contamination of CCA-treated wood in consumer landscaping mulch and to determine whether visual methods or rapid X-ray fluorescence (XRF) technology can be used to identify suspect mulch. Samples were collected throughout the State of Florida (USA) and evaluated both visually and chemically. Visual analysis focused on documenting wood-chip size distribution, whether the samples were artificially colored, and whether they contained plywood chips which is an indication that the sample was, in part, made from recycled C&D wood. Chemical analysis included measurements of total recoverable metals, leachable metals as per the standardized synthetic precipitation leaching procedure (SPLP), and XRF analysis. Visual identification methods, such as colorant addition or presence of plywood, were found effective to preliminarily screen suspect mulch. XRF analysis was found to be effective for identifying mulch containing higher than 75 mg/kg arsenic. For mulch samples that were not colored and did not contain evidence of C&D wood, none exceeded leachable metal concentrations of 50 microg/L and only 3% exceeded 10 mg/kg for recoverable metals. The majority of the colored mulch made from recycled C&D wood contained from 1% to 5% CCA-treated wood (15% maximum fraction) resulting in leachable metals in excess of 50 microg/L and total recoverable metals in excess of 10 mg/kg. The maximum arsenic concentration measured in the mulch samples evaluated was 230 mg/kg, which was above the Florida residential direct exposure regulatory guideline of 2.1 mg/kg.     

Pool of Dust Particles over the Asian Continent: Balloon-borne Optical Particle Counter and Ground-based Lidar Measurements at Dunhuang, China

Measurements of aerosols were made in 2001 and 2002 at Dunhuang (40 degrees 00'N, 94 degrees 30'E), China to understand the nature of atmospheric particles over the desert areas in the Asian continent. Balloon-borne measurements with an optical particle counter suggested that particle size and concentration had noticeable peaks in super micron size range not only in the boundary mixing layer but also in the free troposphere. Super-micron particle concentration largely decreased in the mid tropopause (from 5 to 10 km; above sea level, a.s.l.). Lidar measurements made during August 2002 at Dunhuang suggested the possibility that mixing of dust particles occurred from near the ground to about 6 km even under calm weather conditions, and a large depolarization ratio of particulate matter was found in the aerosol layer. The top of the aerosol layer was found at heights of nearly 6 km (a.s.l.). It is strongly suggested that nonspherical dust particles (Kosa particles) frequently diffused in the free atmosphere over the Taklamakan desert through small-scale turbulences and are possible sources of dust particles of weak Kosa events that have been identified in the free troposphere not only in spring but also in summer over Japanese archipelago. Electron microscopic experiments of the particles collected in the free troposphere confirmed that coarse and nonspherical particles observed by the mineral particle were major components of coarse mode (diameter larger than 1 microm) below about 5 km over Dunhuang, China.     

Review of ozone and temperature lidar validations performed within the framework of the Network for the Detection of Stratospheric Change

The use of assimilation tools for satellite validation requires true estimates of the accuracy of the reference data. Since its inception, the Network for Detection of Stratospheric Change (NDSC) has provided systematic lidar measurements of ozone and temperature at several places around the world that are well adapted for satellite validations. Regular exercises have been organised to ensure the data quality at each individual site. These exercises can be separated into three categories: large scale intercomparisons using multiple instruments, including a mobile lidar; using satellite observations as a geographic transfer standards to compare measurements at different sites; and comparative investigations of the analysis software. NDSC is a research network, so each system has its own history, design, and analysis, and has participated differently in validation campaigns. There are still some technological differences that may explain different accuracies. However, the comparison campaigns performed over the last decade have always proved to be very helpful in improving the measurements. To date, more efforts have been devoted to characterising ozone measurements than to temperature observations. The synthesis of the published works shows that the network can potentially be considered as homogeneous within +/-2% between 20-35 km for ozone and +/-1 K between 35-60 km for temperature. Outside this altitude range, larger biases are reported and more efforts are required. In the lower stratosphere, Raman channels seem to improve comparisons but such capabilities were not systematically compared. At the top of the profiles, more investigations on analysis methodologies are still probably needed. SAGE II and GOMOS appear to be excellent tools for future ozone lidar validations but need to be better coordinated and take more advantage of assimilation tools. Also, temperature validations face major difficulties caused by atmospheric tides and therefore require intercomparisons with the mobile systems, at all sites.