Inhibition of BPA degradation by serum as a hydroxyl radical scavenger and an Fe trapping agent in Fenton process

Identification of reactive oxygen species (ROS) that contribute to bisphenol-A (BPA) degradation and monitoring of BPA at various concentrations in human serum under Fenton reaction conditions were carried out using electron spin resonance (ESR) spectrophotometry and high performance liquid chromatography with electrochemical detection (HPLC-ECD). BPA recovery decreased with increasing Fe concentration and time, both with a Fenton reaction using Fe(II), and with a Fenton-like reaction using Fe(III). In these reactions, BPA dose-dependently decreased the intensity of 5,5-dimethyl-1-pyrroline-N-oxide (DMPO)-*OH, up to 1 microg/ml BPA, and no change in DMPO-O(2)(?-) intensity was observed. The decrease in BPA recovery was inhibited strongly by addition of serum under Fenton-like reaction conditions, and there was a negative correlation between turbidity and BPA recovery. To clarify the mechanism by which serum inhibits BPA degradation, the relationship between BPA recovery and sample turbidity, and characteristics of the precipitates were investigated using spectrophotometry and X-ray analysis. The precipitate formed in the serum-containing sample consisted of C, S, O, P and Fe. BPA degradation was also inhibited under Fenton-like reaction conditions in phosphate buffered saline (PBS), and a precipitate consisting of O, P, and Fe appeared. Precipitates also appeared in authentic albumin and gamma-globulin when sulfate was added with Fenton reagents. After precipitate removal, both Fe and protein concentrations in the supernatant of the protein solutions with sulfate decreased with increasing Fe addition. We demonstrate here that hydroxyl radical generation from Fenton or Fenton-like reactions can degrade BPA, and that serum strongly inhibits BPA degradation, not only by competing with BPA for hydroxyl radicals, but also by trapping Fe with oxidative components present in the serum.     

Synchronous waving in an ocypodid crab, Ilyoplax pusilla : analyses of response patterns to video and real crabs

In several species of ocypodid crabs, including Ilyoplax pusilla (De Haan), waving displays tend to be synchronized among neighboring individuals. However, no quantitative study has yet been conducted. In this study, responses of I. pusilla males to waving of video and real crabs were examined. Spontaneous, periodic waving was observed even when no stimulus waves were present. When single isolated waves of the video crab were randomly delivered (single pulse perturbation), crabs waved either immediately after the stimuli or after some time had elapsed. Assuming that waves immediately after the stimuli were triggered prior to those stimuli, crabs typically responded after a roughly constant delay from the onset of each stimulus. The delay (response time) was close to, but slightly shorter than, the spontaneous wave period. Dependency of response time upon timing of the stimulus (stimulus time) was at most weak. Responses of crabs to periodic waves of the video crabs and waves of␣the real crabs were basically consistent with the results of single pulse perturbation, although there was a consistent tendency for stimulus time and response time to be negatively correlated near stimulus time = 0 s. Overall, these results demonstrate that males of I. pusilla adjust signal timing relative to a neighbor in a manner of phase delay synchrony. The similar response pattern has also been noted in synchronous flashing of fireflies and the calling of katydids. Moreover, these experiments with I.␣pusilla demonstrate the value of video playback as a research tool in this species. Received: 4 April 1997 / Accepted: 17 December 1997     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar,Mongolia

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production,incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently,3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery.However, safety control and marketability of RDF will be required at that moment.     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar,Mongolia

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production, incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently, 3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery. However, safety control and marketability of RDF will be required at that moment.     

Genotoxicity of substances extracted from construction materials

Construction waste such as road pavement and concrete is estimated to constitute about 50% of the total industrial waste in Japan, and the recycling of such material has recently become a prominent topic among construction engineers. It has also been suggested that various types of industrial waste be utilized as components of construction materials. This paper investigates the environmental safety of certain materials in terms of the elutions and genotoxicities of these substances. The substances extracted from some materials, such as emulsifier, ash, and sediment, were found to have genotoxic characteristics. The dose-related responses of the various materials and their genotoxic strengths are shown. Received: June 16, 1998 / Accepted: September 7, 1999     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

A quantitative risk assessment of waterborne infectious disease in the inundation area of a tropical monsoon region

Flooding and inundation are annual events that occur during the rainy season in Cambodia, and inundation has a strong relationship with human health. This study simulated the coliform bacteria distribution using a hydraulic model and estimated the impact of inundation on public health using a dose–response model. The model parameters were calibrated using field survey data from Cambodia and obtained good agreement with the coliform group count distribution. The results suggest that the impact of inundation on human health is most noticeable in residential areas. The annual average risk of infection during medium-sized flood events is 0.21. The risk due to groundwater use ranges from 0.12 to 0.17 in inundation areas and reaches as high as 0.23 outside the inundation areas. The risk attributed to groundwater use is therefore higher than that for surface water use (0.02–0.06), except in densely populated areas at the city center. There is a high risk for infection with waterborne disease in residential areas, and the annual average risk during small flood events is 0.94. An assessment of possible countermeasures to reduce the risk shows that the control of inundation may bring more risk to public health in Cambodia. Shallower inundation water (<0.3 m) leads to a higher risk of infection, but if the depth is greater than 2 m, the risk is low in residential areas. The simulated results explain the spatial distributions of infection risk,, which are vitally important for determining the highest priority places with relatively high risk and will be helpful for decision makers when considering the implementation of countermeasures.     

Current results and future perspectives for Japanese recycling of home electrical appliances

The Japanese system of recycling home electrical appliances has several unique aspects, including (1) a limited number of target appliances, (2) a recycling fee system that requires consumers to pay a recycling fee at the time of disposal, and (3) a direct recycling obligation for manufacturers, who have a physical, rather than a financial, responsibility for their end-of-life products. We studied data from 2001 to 2007 and found that the amount of four specified home electrical appliances and their materials that was recycled increased from about 319,249 tonnes in 2001 to about 447,262 tonnes—or 3.5 kg per inhabitant—in 2006. Recycling yield and development of recycling technologies have also improved. New recycling technologies have enabled a higher rate of material recycling of plastics (i.e., a closed-loop recycling). Improved eco-design, such as design for easier disassembly, has been promoted, and the higher quality of discarded appliances has enhanced the reuse market. Hazardous substances and fluorocarbons are being well managed. Problems with the recycling system include inelastic recycling fees, illegal dumping, illegal transfer by retailers, and the limited number of target appliances. Recycling fees could be reduced; this move might reduce the incidence of illegal dumping, as would engage stakeholders in collaborative efforts against illegal dumping. Illegal transfers could be reduced by improved traceability for retailers. Products such as liquid crystal displays, plasma display panels and clothes dryers have become increasingly common and should be also be targeted for recycling.     

Development of a catalytic dehalogenation (Cl,Br) process for municipal waste plastic-derived oil

Dehalogenation is a key technology in the feedstock recycling of mixed halogenated waste plastics. In this study, two different methods were used to clarify the effectiveness of our proposed catalytic dehalogenation process using various carbon composites of iron oxides and calcium carbonate as the catalyst/sorbent. The first approach (a two-step process) was to develop a process for the thermal degradation of mixed halogenated waste plastics, and also develop dehalogenation catalysts for the catalytic dehydrochlorination of organic chlorine compounds from mixed plastic-derived oil containing polyvinyl chloride (PVC) using a fixed-bed flow-type reactor. The second approach (a single-step process) was the simultaneous degradation and dehalogenation of chlorinated (PVC) and brominated (plastic containing brominated flame retardant, HIPS–Br) mixed plastics into halogen-free liquid products. We report on a catalytic dehalogenation process for the chlorinated and brominated organic compounds formed by the pyrolysis of PVC and brominated flame retardant (HIPS–Br) mixed waste plastics [(polyethylene (PE), polypropylene (PP), and polystyrene (PS)], and also other plastics. During dehydrohalogenation, the iron- and calcium-based catalysts were transformed into their corresponding halides, which are also very active in the dehydrohalogenation of organic halogenated compounds. The halogen-free plastic-derived oil (PDO) can be used as a fuel oil or feedstock in refineries.     

3R strategies for the establishment of an international sound material-cycle society

Focusing on the promotion of the “3Rs” – reduce, reuse, and recycle – the authors summarize the policy that Japan has evolved in waste management and recycling policy over the years. To realize an international sound material-cycle society (SMS), the 3R approaches should first be implemented in each individual country. After each country has established an SMS to the best of its ability, contribution toward reducing the environmental load internationally, especially across all of East Asia, will be achieved by having waste and recyclable resources that cannot be handled in one country effectively used or processed in other countries. The current situation of international resource circulation is described and a concept of SMS at an international level is proposed. The views expressed herein are those of the authors and are not necessarily the official views of the organizations with which the authors are affiliated.