Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter

Environmental Science and Pollution Research - A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial...     

武汉地区夏季和秋冬季大气污染的天气概念模型

利用2013～2019年武汉市生态环境局监测数据、L波段雷达探空资料、NCEP/NCAR逐日再分析资料,对夏季和秋冬季武汉地区污染日的大气污染特征、边界层结构、环流形势、物理量场进行研究,建立了武汉地区大气污染的天气概念模型.主要结论如下:(1)武汉市空气质量具有季节性变化特征,大气污染程度四季分布表现为冬＞秋＞春＞夏.夏季首要污染物是臭氧,冬季首要污染物是PM2.5.(2)比较挑选出的夏季清洁日和污染日的气象要素特征,污染日逆温的平均强度约为清洁日的一倍,逆温底高一般在600 m以下,空气质量一般为轻度-中度污染;静风频率(37.1％)明显高于清洁日的静风频率(2.9％);污染日平均风速小(0.8 m/s),边界层内相对湿度较低.同样比较秋冬季两类天气的气象要素特征,污染日逆温底高低、厚度小,不及清洁日的一半,不利于污染物的扩散,易出现重度污染天气.静风频率(20％)高于清洁日的静风频率(7.5％),风速小(1.6 m/s),污染日边界层内呈明显上千下湿的格局.(3)建立了夏季大气污染的天气概念模型,污染日副高偏弱位置偏东,长江流域易少雨干旱;地面我国东部大范围地区处于均压场中,武汉地区为偏东北异常小风,不利于大气污染物的扩散.(4)建立了秋冬季大气污染的天气概念模型,长江流域环流平直少波动,配合地面弱低压的天气形势和较强的逆温使得大气污染物聚集在近地面.蒙古冷高压强度偏弱,使得入侵我国的冷空气强度偏弱;武汉地区为偏北小风,对雾霾的移除和稀释扩散作用差.该研究结论可供大气污染预测预警研究和环境管理部门大气污染的联防联控参考.     

Study on coupling between mineral resources exploitation and the mining ecological environment in Shanxi Province

Environment, Development and Sustainability - Due to rapid socioeconomic development, seeking the coordination of resources exploitation and the ecological environment has become an objective...     

基于多功能协调的湖北省城市建设用地差别化绩效管控

城市建设用地差别化绩效管控是国土空间治理能力现代化的重要体现，也是土地政策精准投放的基础。从新时期城市建设用地的基本价值出发，构建基于经济生产、社会服务、生态保护、政治公平服务保障和科技文化培育五维功能的绩效评价指标体系，采用熵权法绩效评价模型和改进的协调度模型对湖北省城市建设用地五维功能绩效和协调度进行了评价，在此基础上通过“绩效-协调”差异性特征划分了不同类型区，并相应地制定了差别化管控政策。研究表明：湖北省城市建设用地综合绩效差异性表现为“中心城市最高，副中心城市次之，远离中心区域最差”的分布格局，而不同功能维度绩效差异性也较为明显，结合城市建设用地多功能协调程度来看，湖北省16个市域可划分为3类管控区，分别为多功能协调优化区、多功能潜力挖掘区和多功能适度强化区，并可分别从结构优化、功能协调、总量控制、增量供给、存量挖潜等方面对城市建设用地实行差别化管控。该研究可为建设用地双控行动与土地资源优化配置提供方法参考。 关键词： 土地利用；城市建设用地；绩效；多功能协调；差别化管控     

Enhanced Interfacial Adhesion and Characterisation of Recycled Natural Fibre-Filled Biodegradable Green Composites

The structural, thermal, mechanical, and biodegradable properties of composite materials made from polylactide (PLA) and agricultural residues (arrowroot (Maranta arundinacea) fibre, AF) were evaluated. Melt blended glycidyl methacrylate-grafted polylactide (PLA-g-GMA) and coupling agent-treated arrowroot fibre (TAF) formed the PLA-g-GMA/TAF composite, which had better properties than the PLA/AF composite. The water resistance of the PLA-g-GMA/TAF composite was greater than that of the PLA/AF composite; the release of PLA in water from the PLA/AF and PLA-g-GMA/TAF composites indicated good biological activity. The PLA-g-GMA/TAF material had better mechanical properties than PLA/AF. This behaviour was attributed to better compatibility between the grafted polymer and TAF. The results indicated that the T_g of PLA was increased by the addition of fibre, which may have improved the heat resistance of PLA. Furthermore, the mass losses following burial in soil compost indicated that both materials were biodegradable, especially at high levels of AF or TAF substitution.     

Optimal Absorbent Evaluation for the CO2 Separating Process by Absorption Loading,Desorption Efficiency,Cost, and Environmental Tolerance

The CO₂ absorption capacities of potassium glycinate, potassium sarcosinate (choline, proline), mono-ethanolamine (MEA), and tri-ethanolamine were evaluated to find the optimal absorbent for separating CO₂ from gaseous products by a CO₂ purification process. The absorption loading, desorption efficiency, cost, and environmental tolerance were assessed to select the optimal absorbent. MEA was found to be the optimum absorbent for separating the CO₂ and H₂ mixture in gaseous product. The maximum absorption loading rate was 0.77 mol CO₂ per mol MEA at temperature of 20°C and absorbent concentration of 2.5 mol/L, whereas desorption efficiency was 90% by heating for 3 h at 130°C. MEA was found to be an optimal absorbent for the purification process of CO₂ during gaseous production.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

Production of Curdlan Grown on Cassava Starch Waste Hydrolysates

Cassava starch waste hydrolysates (CSWHs) with different degrees of polymerisation, i.e., CSWHs-1, CSWHs-2 and CSWHs-3, were prepared through the hydrolysis of cassava starch waste with thermostable a-amylase from Thermococcus sp. HJ21. The prepared CSWHs were then used as a carbon source for curdlan production with Alcaligenes faecalis ATCC 31749. The amount of curdlan produced and the glucosyltransferase activity during curdlan synthesis increased more obviously when CSWHs-2 was used as the carbon source than when glucose was used. Using both carbon sources, the maximum curdlan production was observed at day 5, and the maximum glucosyltransferase activity was observed at day 4. Glucosyltransferase activity decreased thereafter, and biomass continued to increase until the end of the experiment (day 6). Results indicated that the enhanced curdlan production with CSWHs as the carbon source was highly correlated with glucosyltransferase activity.     

煤制乙二醇废水预处理装置的工业化调试

针对煤制乙二醇废水含高浓度硝酸盐氮的特点,设计了缺氧膨胀床(AEB)反应器预处理装置,并进行了工业化启动和调试运行,考察了其在反硝化连续流运行条件下的处理效果及工艺参数变化。结果表明,AEB反应器启动后,填料层生物膜挂膜快速且生长稳定。反应器在工业化调试阶段运行稳定,COD和TN的去除率和去除负荷较为稳定。在受到来水冲击后,AEB反应器处理效果稳定,出水可在短期内恢复正常。该技术的系统操控参数范围较广,易于工业化操控运行,在煤制乙二醇废水和其他含高浓度硝酸盐氮废水的处理中具有较大的推广价值。