Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

温度对酚试剂分光光度法测定空气中甲醛的影响

GB/T 18204.26《公共场所空气中甲醛测定方法》中的酚试剂分光光度法,其方法原理是空气中甲醛与酚试剂反应生成嗪,嗪在酸性溶液中被高铁离子氧化形成蓝绿色化合物。根据颜色深浅,比色定量。两步反应在室温较低时作用不完全。吸光度随时间延长而逐渐加大。文章经过不同室温实验提出,在室温低于23℃时,两步反应应在恒温水浴43℃保温10min。室温达到23℃时可不必加热。     

方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.     

在降雨量极少的条件下日本琵琶湖的环境因子的分布(英文)

琵琶湖是日本第一大淡水湖,20世纪60年代以来,由于经济的发展,湖水水质逐步变坏。1977年湖的北部出现赤潮,1983年湖的南部出现了湖泊富营养化的产物微囊藻。多年来,在深水区湖水温度分层情况下,叶绿素a或浮游植物主要分布在湖的表层(Tezuka,1984)。但在1994年夏季,降雨量极少的情况下,在深水区叶绿素a或浮游植物主要分布在温跃层附近,这种现象在琵琶湖是罕见的(Nakanishi,1995)。最近,琵琶湖北湖的藻类爆发显著增加了溶氧的消耗,导致了湖底层溶氧的减少。如果湖底层溶氧持续减少,底泥储存的磷就会释放到湖水中,从而加快湖泊富营养化的进程。本文分析了琵琶湖南北10个点1994年4月至1995年3月每月1次的常规观测资料,深入剖析了全湖物理化学参数的时空分布,不仅发现叶绿素的峰值在湖水温度分层时出现在温跃层的上部,而且湖底边界层同时出现了低溶氧和高浊度的现象。分析认为绿素a和溶氧、浊度的对应关系表明温跃层是一光合成活跃的区间。     

A reflection on four impactful Ambio papers: The biotic perspective: This article belongs to Ambio’s 50th Anniversary Collection. Theme: Climate change impacts

Climate change represents one of the most pressing societal and scientific challenges of our time. While much of the current research on climate change focuses on future prediction, some of the strongest signals of warming can already be seen in Arctic and alpine areas, where temperatures are rising faster than the global average, and in the oceans, where the combination of rising temperatures and acidification due to increased CO₂ concentrations has had catastrophic consequences for sensitive marine organisms inhabiting coral reefs. The scientific papers highlighted as part of this anniversary issue represent some of the most impactful advances in our understanding of the consequences of anthropogenic climate change. Here, we reflect on the legacy of these papers from the biotic perspective.     

Influence of constant and fluctuating temperature on biodegradation rates of fish biodiesel blends contaminating Alaskan sand

Bioremediation of sandy soil contaminated with fish-biodiesel, conventional diesel, and blends of both was studied in microcosm experiments at different temperatures, simulating the subarctic environment. While distinct lag, exponential, and stationary phases were observed at 20 °C, degradation at 6 °C was slow and the lag phase continued throughout the 4-week experiment. A three-phase 1st order kinetic model successfully described respiration at 20 °C, a one-phase model was sufficient at 6 °C. For temperatures fluctuating between ∼6 and ∼20 °C, higher than expected microbial activity persisted at 6 °C for several days, due to the presence of active cultures, even though the soil temperature closely followed the air temperature. At 20 °C, respiration peaked already after 1 week, and 18-51% of the initially added fuel was mineralized within 4 weeks, whereby degradation was higher at higher biodiesel percentages. Biodiesel addition accelerated mineralization of blends with regular diesel beyond expectations. In blends with 20% biodiesel, the degradation rate constant was twice as high as for conventional diesel. These synergistic effects are likely due to an active microbial population. Addition of biodiesel to conventional diesel could reduce the impact of diesel spills.     

高温(70℃)玉米秸秆水解液产氢行为及群落结构

考察了高温条件下(70℃)牛粪堆肥、土壤、厌氧污泥、腐烂秸秆种接种物利用玉米秸秆水解液的产氢行为。结果表明:牛粪堆肥接种时达到最大的产气量(1355.7mL/L)和氢气产量(608.4mL/L),随后依次为腐烂秸秆、厌氧污泥和土壤。修改的Gompertz方程可以较好描述产氢量随时间变化趋势(R2>0.99)。牛粪堆肥接种时达到最大的产氢潜力(676.0mL/L),而土壤接种时的迟滞时间最小(9.8h)。DGGE图谱显示:不同接种物对应不同的微生物群落结构。Bacillus thermozeamaize,Enterobacter sp.JDM-19和Thermoanaerobacterium polysaccharolyticum strain,KMTHCJT和可能分别是牛粪堆肥,厌氧污泥和腐烂秸秆接种条件下的关键产氢微生物。     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

实验室条件下温度升高对水体叶绿素a的影响研究

以23℃为基础,按2℃温差设置温度梯度,最高温度组为29℃。每隔10d取样一次,进行叶绿素α浓度的测定。结果显示温度低于25℃时,增温有助于藻类生物量的提高,而温度超过25℃时,增温限制了藻类生物量的提高。水体温度量对浮游植物生物的影响程度与增温幅度和培养时间有关。Pearson相关性分析结果显示:温度与叶绿素a浓度相关性显著(P0.05),叶绿素a浓度与培养时间呈极显著正相关(P0.01)。     

Experimental and theoretical studies on physico-chemical parameters affecting the solubility of phosphogypsum

Phosphogypsum is a waste by-product of the phosphate fertilizer industry, which is usually disposed in the environment because of its restricted use in industrial applications. Physico-chemical conditions existing in stack fluids and leachates are of major importance and determine solubility and redox stability of phosphogypsum, as well as radionuclide release from stacks to terrestrial environments. The aim of this study is to assess the effect of key parameters (e.g. ionic strength, temperature, pH) on the solubility of phosphogypsum. Phosphogypsum sampling and in-situ measurements were carried out at a coastal stack in Cyprus, solubility experiments were performed in simulated laboratory systems and thermodynamic calculations by means of MINTEQA2, an equilibrium speciation model. Generally, increasing ionic strength and temperature leads to increased phosphogypsum solubility, with the former being much more effective. The increased solubility of phosphogypsum in saline solutions is attributed solely to ionic strength effects on the activity of ionic species in solution and no solid phase transformations could be observed. The effect of pH on phosphogypsum solubility seems to be insignificant at least in a pH range between 4 and 8. Regarding uranium levels, there is a strong correlation between salinity and uranium concentration and linear correlation between phosphogypsum solubility and uranium levels in stack solutions, indicating the incorporation of uranium into the gypsum lattice and the formation of a solid solution.