工作场所职业工效相关因素及其管理初探

为了探讨工作场所职业工效管理的基本策略和方法，在概述职业工效相关因素类别、相互关联及评价方法等基础上，提出基于职业病危害防治要求、风险管理理念和管理体系建设模式的职业工效不良因素干预管理的初步策略及实施要点。研究结果表明:工作场所职业工效相关因素包括个体特征、工艺设备及其布局、工作系统设计、作业环境、作业管理和社会心理因素等，不同因素间存在直接或间接的相互影响，并最终影响到微观层面劳动者职业活动的工效特点及宏观层面工作场所整体的职业工效特征；实施有效的职业工效管理，在于科学辨识、评估不良职业工效因素的基础上，进一步在职业病危害预防控制的不同阶段采取合理可行的管理方法进行干预，并持续改进。     

Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

聚丙烯车间12m3釜聚合岗危险分析及安全措施

聚合岗位是石油化工厂聚丙烯车间重要且非常危险的岗位,一旦发生意外事故,将会导致人员的重大伤亡和巨大的经济损失。笔者依据聚丙烯车间生产现状,详细地介绍了12m3 釜聚合岗位工艺流程,用“系统安全”的理论和方法对其主要物质、生产工艺、操作过程的危险性进行了辨识,且绘制了主要危险点分布图;通过危险源辨识可知,聚合釜具有的超温、超压特点是该岗位众多危险源中最为严重的潜在危险,应用“事故树法”对聚合釜超温、超压爆炸事故进行了危险分析,找出其爆炸潜在的危险因素有2 4种,该事故树的最小割集共有6 6个,表明聚合釜爆炸可能性是很大的。依据分析结果,针对聚合釜爆炸可能性最大的危险因素,提出了安全对策与措施,以避免或减少爆炸事故的发生     

毛细管柱气相色谱法测定工作场所空气中的丙烯腈

为了建立采用毛细管柱测定工作场所空气中丙烯腈浓度的方法,使用活性炭管采集工作场所空气中的丙烯腈,二硫化碳溶液解吸,毛细管柱分离后,用氢火焰离子化检测器检测。结果显示:丙烯腈的检出限为0.73μg/ml,相关系数为0.9998,解吸效率94.3%～104.7%,相对标准偏差为0.41%～1.0%。因此,该方法灵敏度高、检测准确、操作性强,可提高丙烯腈的检测效率,适用于工作场所空气中丙烯腈的分析。     

Targeted workplace incivility: The roles of belongingness,embarrassment, and power

Research to date has largely been unclear about whether a single perpetrator is sufficient to instigate the well‐documented negative consequences of workplace incivility. In the current research, we examine the extent to which perceived belongingness and embarrassment mediate the relationship between incivility from a single perpetrator and two important outcomes (job insecurity and somatic symptoms), and the extent to which the perpetrator's power moderates these relationships. Across two studies using different methods, we find that incidents of single perpetrator incivility are associated with target feelings of isolation and embarrassment, which in turn relate to targets' perceived job insecurity and somatic symptoms (Studies 1 and 2) both the same day and three days later (Study 2). Moreover, we find that perpetrator power moderates the relationship between incivility and embarrassment, such that targets are more embarrassed when the perpetrator is powerful. Implications for theory and practice are discussed. Copyright © 2017 John Wiley & Sons, Ltd.     

基于层次分析法的有毒作业场所职业危害程度分级指标研究

我国目前职业危害形势依然严峻，急、慢性职业中毒案例时有发生。对可能引起急、慢性职业中毒的有毒作业场所，按照其职业危害严重程度实施分级、分重点监管，成为我国职业危害监管工作需要解决的迫切需求。实施有毒作业场所分级监管的关键，是确定合理的分级指标，从而将有毒作业场所区分开。本文应用层次分析法，对有毒作业场所的各项评价指标进行分析，并最终确定毒物浓度超标倍数作为最终的分级指标，从而为制定有毒作业场所分级标准，开展有毒作业场所分级监管提供科学的依据。     

固井水泥作业场所粉尘治理及效果评价

对油田固井水泥生产和使用作业场所进行了劳动卫生学调查,对粉尘污染严重的立式散装水泥储存罐尾气口排放、水泥裸口装卸、水泥与外加剂干混工艺进行了技术改造和粉尘治理,使作业场所空气中粉尘浓度由平均49.94 mg/m3降至1.19 mg/m3,除尘效率达97.81%,效果明显。     

作业场所职业病危害因素检测与评价信息化管理系统的应用

通过应用信息化网络技术,建立了作业场所职业病危害因素检测与评价数据库,实现了用人单位作业场所有害因素检测与评价数据的申报、传递、编制、审核、报告打印、统计等功能。信息化模板的建立,降低了职业卫生学调查工作难度,方便了检测方案和报告编辑,统一了作业场所职业病危害因素检测与评价报告书生成格式,并自动生成职业病危害因素检测与评价报告书,提高了作业场所职业病危害因素检测与评价工作的质量。本系统具有操作简易、处理功能强大、内部监督管理完善等特点,实现作业场所职业病危害因素检测与评价信息管理科学化、规范化、信息化,降低了劳动强度,提高了工作效率,有很好的应用价值,尤其适合现阶段基层职业卫生工作的需要。     

某市区重点行业职业病危害因素现状调查研究

对某市区重点行业15家企业职业病危害因素进行检测与评价,对普查结果进行综合分析。结果表明:15家企业工作场所化学有害因素职业卫生现状情况良好,但噪声危害程度较大;在6个重点行业中,电子制造行业有害因素合格率最低,为84%,其次是纺织行业,有害因素合格率为85%,其他化学原料及化学制品、化工、木制家具、石材加工四个行业合格率均较高;市直以上企业职业卫生现状情况优于区属企业,300-2000人之间较大规模的企业职业卫生现状情况优于300人以下的企业。同时,对企业提出了职业危害现状的改进措施与建议。     

加强危险场所电气安全检测,提高化工企业本质安全水平

针对近年来化工企业电气安全、防静电等事故多发的现状,本文通过对化工企业电气安全、防静电等安全设施存在的问题进行分析,阐述了化工企业电气安全、防静电设施存在的主要缺陷,强调了利用技术支撑手段对在用安全设施进行检测检验对提高企业本质安全水平的重要性,并对如何做好电气安全、防静电等安全设施的检测工作提出了建议。