首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   24篇
  免费   1篇
  国内免费   5篇
安全科学   5篇
废物处理   1篇
环保管理   2篇
综合类   20篇
污染及防治   2篇
  2021年   1篇
  2020年   1篇
  2019年   1篇
  2016年   1篇
  2014年   1篇
  2013年   1篇
  2012年   2篇
  2011年   2篇
  2010年   1篇
  2009年   2篇
  2008年   2篇
  2007年   2篇
  2006年   2篇
  2003年   2篇
  2002年   1篇
  2001年   1篇
  2000年   1篇
  1998年   2篇
  1997年   1篇
  1996年   3篇
排序方式: 共有30条查询结果,搜索用时 31 毫秒
1.
为方便快速分离沉积物中含氯农药和多氯联苯,将超声波技术和蒸汽蒸馏萃取技术相结合,萃取沉积物中的微量含氯农药和多氯联苯,所得萃取物不需进一步的净化和浓缩,可直接用于色谱分析.实验表明,在进行蒸汽蒸馏萃取之前,使用辅助的超声波技术可将大部分待测物的回收率提高20%-30%,较好地解决了由于沉积物的吸附作用而导致的蒸汽蒸馏萃取回收率偏低的缺陷.该法使沉积物样品中的氯代农药和多氯联苯的蒸汽蒸馏萃取富集成为可能.  相似文献   
2.
为适应用废铜制取电解铜时快速测定铜的需要,试验用快速电解法测定电解铜中的铜的方法,采用水浴控制溶样温度,电炉加热驱氮,加大电解电流,缩短电解时间,对不同电解酸度进行了探讨,样品测定结果重现性好,准确性较好。  相似文献   
3.
目的 研究封闭式镀液循环装置中不同镀液循环流量对Ni-SiC复合镀层的影响规律,优化镀液循环流量参数.方法 以Q235管状工件为待镀基体,以添加SiC颗粒的改良瓦特镀液为母液,在自主研发的封闭式镀液循环电镀装置中以0.3、0.5、0.7 m3/h的镀液循环流量于管件内壁制备Ni-SiC复合镀层,通过SEM检测、XRD测试、硬度测试和摩擦磨损性能测试等手段,对各Ni-SiC复合镀层宏微观形貌、厚度、成分、结构、硬度和耐磨性进行分析研究.结果 在0.5 m3/h流量条件下,镀层厚度为32.98μm,SiC颗粒含量为15.37%,镀层晶粒尺寸和硬度分别为10.84 nm和704HK0.245,该条件下制备的Ni-SiC复合镀层具有最佳耐磨性,摩擦系数为0.41,体积磨损率仅2.83×10–5 mm3/Nm.结论 在不同镀液循环流量参数下,采用该封闭式循环电镀装置,均可制得均匀完整的Ni-SiC复合镀层.随镀液循环流量的升高,镀层厚度和SiC颗粒体积含量均降低,镀层颜色金属光泽增强,镀层晶粒尺寸先减小、后增大,镀层硬度则先升高、后降低.  相似文献   
4.
通过对酸性法测定高锰酸盐指数全过程的分析,结果表明水样静置时间、水样浓度、水浴时间、反应温度等因素影响测定结果。文章总结了测定过程中需要注意的几个关键环节,确保获得准确数据。  相似文献   
5.
采用混凝-砂滤-固定化生物活性炭纤维的组合处理工艺来处理洗浴废水.利用聚合氯化铝和聚丙烯酰胺为混凝剂对废水进行混凝处理,之后将废水通入砂滤柱,废水在曝气池进行曝气后进入固定化生物活性炭纤维(IBACF)单元.IBACF固定化完成后,连续运行30 d,去除率稳定之后,处理后的浊度、LAS、S0D_(Mn)平均值分别为2.2NTU、0.12 mg·L~(-1)、2.33 mg·L~(-1),平均去除率分别为95.2%、94.7%、84.8%.经处理后的洗浴废水各项指标均可以达到生活饮用水卫生标准或城市供水水质标准,可以直接回用于洗浴用水和其他生活杂用水.  相似文献   
6.
Research on the micro- and macrocharacteristics of different metamorphic degrees of coal helps improve the control and protection techniques used during spontaneous combustion. Nine coals with different properties were thoroughly investigated in this study. Fourier transform infrared spectroscopy and a self-designed temperature-programmed oil bath experimental system were adopted to analyze the molecular structure and macrocharacteristic parameters of the spontaneous combustion of coal. Additionally, the influence of particle size on spontaneous combustion was considered. Various functional groups were employed as microcharacteristic parameters to capture the principal active groups in oxidation. The gas production rate, oxygen consumption rate, gas concentration, heat energy release rate, and characteristic temperatures were evaluated as macrocharacteristic parameters to investigate the changes in coal during oxidation. The results establish that the microcharacteristics of coal molecules determine the degree of spontaneous combustion based on intrinsic properties and that changes in the macrocharacteristics of the spontaneous combustion of coal reflect the microstructural changes. The contents of the hydroxyl groups, carbonyl groups, alkyl ether and aryl ether in the coal molecules gradually decrease with the metamorphic increase. Oxygen-containing functional groups have higher reactivities and easily react with oxygen, causing the macroparameters, such as the oxygen consumption rate, the gas generation rate and the heat energy release rate, to consistently decrease with the increase of the metamorphic degree. Small-particle-size coal molecules have more active aliphatic hydrocarbons, oxygen-containing functional groups and a larger specific surface area, increasing the chances of adsorbing the oxygen of active groups and promoting the reaction between coal and oxygen. The experimental results indicate that coal samples with higher metamorphic degrees or larger sizes exhibit lower tendencies toward spontaneous combustion. Evaluation of the spontaneous combustion of coal based on a temperature-programmed oil bath experimental system is of great practical importance for preventing the spontaneous combustion of coal during storage, processing and utilization and can serve as a convenient reference for production safety in mining applications.  相似文献   
7.
以铅锌尾矿样为测试样品,标土为质控样,分别用王水水浴-原子荧光法和微波消解-原子荧光法测定尾矿中砷含量,通过比较两种方法的实验过程以及数据结果,找出相对更适宜测定铅锌尾矿中砷含量的方法。结果表明,两种方法测定的标土砷含量均在推荐值范围内,微波消解尾矿样测定结果的相对标准偏差较小,重现性更好;实验过程中,微波消解-原子荧光法速度快,耗时短,效率更高。使用微波消解法测定铅锌尾矿中砷含量的结果更接近于样品的真实值。  相似文献   
8.
选用2种在市场上畅销的护肤品(六神沐浴露和玉兰油沐浴露),采用大型蚤(daphnia magna straus)的急性毒性标准测定方法,初步研究和评价了2种沐浴露对水环境污染的生态毒性.结果表明,六神沐浴露24h的LC50和EC50值分别为96.76和81.72 mg·L-1,48 h的LC50和EC50值分别为78.42和72.93 mg·L-1;玉兰油沐浴露24h的LC50和EC50值分别为91.13和84.95 mg·L-1,48h的LC50和EC50值分别为80.11和78.51 mg·L-1.2种沐浴露对大型蚤的致死和抑制效应与其浓度呈明显正相关关系,且毒性效应随作用时间的延长而增强.  相似文献   
9.
气浮法对矿区洗浴污水中洗涤剂处理及回用研究   总被引:1,自引:0,他引:1  
邵武  李中和  宋岩 《环境工程》2009,27(1):30-32
通过不同方案的对比试验,确定了矿区洗浴污水处理及回用的工艺,重点解决了阴离子合成洗涤剂对水质的影响,为矿区洗浴污水回用提供一项可行的方案。  相似文献   
10.
微电解—SBR组合工艺处理漂染废水   总被引:4,自引:0,他引:4  
采用微电解-SBR组合工艺对漂染废水进行了处理研究。结果表明,以微电解作预处理,使 漂染废水的可生化性BOD5/COD比值为0.22-0.26提高到0.35-0.57。再经SBR法和炉渣吸附法处理后,各项水质指标均达GB8978-88《污水综合排放标准》中纺织印染工业的一级标准。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号