单体米黄大理石矿粉对小麦产量及各器官重金属含量的影响

采用盆栽法,研究大理石矿粉对小麦产量及对成熟期小麦根、茎叶、果实中重金属含量的影响。结果表明:添加大理石矿粉会显著影响小麦的生长及产量(P<0.05),添加矿粉的量不大于60g/kg时,小麦的结实小穗数、穗粒数、千粒重和产量随添加量的增加而增加,而含量再继续增大时,对小麦产量的促进作用将减弱;低含量的大理石矿粉能缓解Pb、Cu、Zn对小麦的毒害,而高含量的对小麦的影响各异,小麦各器官中重金属Cd、Cr与添加大理石矿粉含量呈显著正相关;重金属对小麦各器官的影响排序,根:Cd>Cr>Pb>Cu>Zn,茎叶:Cd>Cr>Cu>Pb>Zn,果实:Cd>Cr>Pb>Zn>Cu。在大理石开采区应该采取一定的措施,避免大量的大理石矿粉散入周围的耕地。     

Properties of concrete paving blocks made with waste marble

Marble industry produces large amounts of waste marble - what causes environmental problems. In paving blocks based on two cement types we have partly replaced aggregate with waste marble. Physical and mechanical tests were performed on blocks so produced. The cement type turns out to be an important factor. Mechanical strength decreases with increasing marble content while freeze-thaw durability and abrasive wear resistance increase. Waste marble is well usable instead of the usual aggregate in the concrete paving block production.     

Radionuclide content of building materials and associated gamma dose rates in Egyptian dwellings

Studies have been carried out to determine the natural radioactivity in some building materials (bricks, tiles, marble and ceramics) and their associated radiation hazard. The radioactivity concentrations of ²²⁶Ra ²³²Th and ⁴⁰K were measured using a gamma spectrometer with a Hp–Ge detector. The activities of ²³⁸U and ²³⁴U were measured using an alpha-spectrometer with a surface barrier detector after applying a radiochemical procedure. The ²³⁴U/²³⁸U isotopic ratios were calculated. The radium equivalent activities and the radiation hazard index associated with the natural radionuclides were calculated. A computer program was developed and applied to calculate the dose rate a person will receive from the walls of a room constructed from the studied building materials.     

Geological and technical characterisation of Iscehisar (Afyon-Turkey) marble deposits and the impact of marble waste on environmental pollution

Turkey, due to its location in the Alpine-Himalayan belt, has numerous marble deposits. More than 250 marble types with different colours and patterns have been produced from these deposits and one hundred of these are well known around the world. One such well-known marble type is Afyon-Iscehisar. Afyon-Iscehisar is Palaeozoic in age and has been quarried since the era of the Roman empire. The Afyon region is known as one of the most important marble production and processing centres in Turkey. The Afyon province, which possesses 3.5% of exploitable marble reserves (3,872,000,000 tonne) in Turkey, yields 9% of the total marble block production. The 409 marble processing plants in Afyon produce 19% of the total slab in Turkey. As a result of marble production activities, approximately 340,000 tonne of marble waste has accumulated in the area. While some of these unshaped marble blocks are re-used and returned to the economy, the majority are discarded. There are two waste marble storage fields located in the Afyon-Iscehisar region. All of the solid and fine-grained marble waste is stored in waste marble storage fields in Susuz Bo?az? and in the nearby Iscehisar marble quarries. The ecological effects of the marble waste, which were once discharged everywhere and exhibited visual pollution, has now been reduced to a minimal level.     

Black layers on historical architecture

Background, aim and scope

The external surface of any building in urban polluted environment is unavoidably destined to be covered with layers that assume a grey to black colour and are generally called ‘black crusts’. These, according to standard protocols and glossary, are deteriorated surface layers of stone material; they can have variable thickness, are hard and fragile and can detach spontaneously from the substrate, which, in general, is quite decayed. Plain visual examination may lead to consider ‘black crusts’ all similar, whilst only a careful diagnostic investigation can distinguish ‘black crusts’ and the consequences of their formation on stone substrates. In this paper, various black layers on marble are studied and compared and the morphological and compositional characteristics discussed according to the related mechanisms of formation. Differences between old (hundred years) and recent crusts (30 years) are investigated and pointed out.

Materials and methods

Samples of black crusts collected from the Milan Cathedral façade (Candoglia Marble) have been studied and compared with the careful and synergic employ of traditional techniques: optical (transmission and reflected VIS light) and electron microscopy, X-ray spectrometry and micro-Fourier transform infrared spectroscopy.

Results

Visual examination of loose fragments does not allow to point out outstanding differences amongst the various samples; black layers have similar main mineral components, gypsum and airborne particles, with different spatial distribution. The microscopic studies allowed to point out the porosity differences, the gypsum crystallisation habit, different amount of embedded particles, level and progress of marble decay.

Discussion

The observations lead to define three main types of black crusts: black crust deriving from marble sulphation, compact deposit and encrustation due to exogenic materials deposition. Black crusts show evidence of sulphation in progress, without a clear continuity solution between crust and marble; the lack of separation is particularly evident in ‘recent’ crust, where the sulphation process is more active. Black compact deposits show a higher porosity than black crusts because gypsum is not coming from the chemical corrosion of the substrate but from outside; actually, in the former case, the substrate is sound. Encrustations show a highly regular crystal organisation of gypsum (close packed tabular crystals) that cannot be traced back to casual atmospheric deposit or to corrosion of the substrate but rather to the crystallisation of a solution coming from an external source. Also in this case, the marble is sound; evidence of the effect of some protection treatment is pointed out.

Conclusions

In spite of the apparent similarity of the examined samples, analytical results have evidenced three main types of black crusts: black crust with decayed substrate, compact deposit and black encrustation showing a sound substrate underneath. Experimental evidence of calcite grains sulphation in progress, taking place according to a model recently proposed, has been observed. Sulphation process is prevented where particular conservation treatments had been applied in the past.

Recommendations and perspectives

New experimental studies can be focussed to understand the specific conditions (measurements of micro-climatic and thermodynamic parameters) and mechanisms for black crusts formation in situ. The problem of the kinetic of the sulphation process of marble, the assessment of black layers formation in the case of different carbonate stone materials and the study of acid attack in presence of surface protecting layers deserve further investigation.     

Safety analysis of slipping barefoot on marble covered wet areas

This study was conducted in order to determine the suitable surface processing techniques which will increase the safety of pedestrians, reducing the risk of slipping on wet floor coverings on which they walk barefoot. In the scope of the study, slip angle of surface-processed marbles in three different dimensions is determined by using DIN 51097 Standard “The determination of the characteristics that reduce slipping on wet, barefoot surfaces”. Slip angles were calculated with the help of an inclined plane method and by using three different surface processing techniques (polishing, honing and tumbling techniques) for five different types of marble. It was found that the parameters which affected slip angle values of the marbles were surface roughness, plate sizes, grain size of the abrasives used for surface processing, physical and mechanical properties. Statistical analysis was used to determine the relationship between these parameters. The marbles were then grouped according to safe utilization places depending on slip angle and surface roughness, according to the statistical results.     

飞灰及其混合脱硫剂浆液脱硫特性的实验研究

从碱性物溶出率和脱硫容量两个方面，对杭州地区3种电厂飞灰和飞灰－大理石混合脱硫剂进行了实验研究。结果表明，降低pH值有利于飞灰中碱性物的溶出，pH为5－8时，飞灰中碱性物溶出率约为30％。不同电厂飞灰的脱硫容量差异较大，为0.12-0.25gSO2/g飞灰，相当于石灰石脱硫容量的23％－48％。飞灰－大理石混合脱硫剂中飞灰与大理石之间具有相互协同促进作用，对飞灰：大理石为1：1的混合脱硫剂，其脱硫容量Ws60比大理石提高了30％。当脱硫率要求不太高时，可考虑使用飞灰－大理石混合脱硫剂，以部分或全部取代石灰石脱硫剂，从而大大降低脱硫剂成本。