Performance assessment system of health,safety and environment based on experts' weights and fuzzy comprehensive evaluation

Performance evaluation of Health, Safety and Environment (HSE) is the measurement of a company's achievement in HSE management. In order to receive a comprehensive and objective evaluation result, it is necessary to consider all evaluation factors and experts at different levels when HSE performance assessment is conducted. To improve conventional HSE performance evaluation, where weighted average method was used, a Fuzzy Comprehensive Evaluation (FCE) method is used in this study by taking experts' weights into account. Further, an HSE operating performance assessment system is designed to simplify manual and complex assessment process and generate charts and analysis reports automatically. Finally, a case of petrochemical enterprise is used to illustrate the effectiveness of the method and system.     

城市能源利用与环境保护的综合管理初探

能源短缺和环境污染已成为中国推行全面协调可持续发展的重要制约因素,作为能源消耗的主体和环境污染的控制重点,在城市层面推动能源发展战略的转变和强化环境保护是发展的基本要求.鉴于能源与环境之间的高度关联性,在管理方面要求对能源发展和环境保护进行统筹考虑和综合管理,充分强调能源经济效率和环境制约因素在能源发展中的作用.通过制定合理的产业能效标准和排放绩效标准,为城市经济、能源和环境的可持续性发展提供科学性、系统性决策支持.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

膜、柱串联固相萃取-高效液相色谱法测定水中多环芳烃(PAHs)的研究

建立了用膜-柱串联固相萃取(SPE)技术,甲醇和水作为流动相进行梯度洗脱,紫外和荧光检测器串联的高效液相色谱法(HPLC)分析水中EPA优先监控的16种PAHs的方法.     

Prediction of Leachate Level in Kimpo Metropolitan Landfill Site by Total Water Balance

Kimpo metropolitan landfill has received various kinds of wastessince January 1992. The leachate level was measured to be 10.3 m in May 1995 and the level increased to 12.2 m in August 1996. Therefore, to prove the reason for the increasing leachate level, we calibrated hydraulic conductivity of each waste andintermediate layer using the HELP (Hydrologic Evaluation ofLandfill Performance) model. The leachate generation data measured from February 1993 to October 1995 was used in the model calibration. As a result of a model calibration, we obtained anaverage infiltration ratio and used this in analysis of the total water balance to predict elevation of leachate level. Main causes of the elevation of the leachate level were the high water content of the waste and the degradation of the leachate-drainage system caused by the subsidence of a naturalbarrier layer.     

性能化设计标准在火灾安全设计中的应用

随着建筑向着高层化、大型化的趋势发展 ,目前世界上许多国家的建筑设计正逐步地从处方式规范转换到性能化规范。性能化规范的成功实施需要建立性能化设计标准。在建筑火灾安全设计中 ,使用的性能化设计标准包括确定性设计标准和偶然性设计标准。确定性设计标准主要与火灾的发生、发展和蔓延等级 ,以及生命安全等级有关。偶然性设计标准主要关心火灾发生的可能性及产生的后果。文章最后对性能化设计标准的应用情况进行了讨论和总结     

复杂工业系统中班组人因失误分析

在复杂工业系统中 ,人因可靠性分析 (HRA)是预防和减少人因失误的有效方法。人在复杂工业系统中的生产活动 ,往往是由组织中班组成员集体完成的 ,完整的HRA必须充分考虑班组人误的产生。班组人误的产生有其自身的规律 ,如何合理地定义人员行为形成因子 (PSFs)是班组人因失误分析的难点 ,也是班组人因失误分析的重要手段 ,被广泛应用在核电厂 ,航空和造船工业领域的事故分析中。笔者详细分析和探讨了班组人因失误的定义、产生过程及相关的人的行为形成因子 ,以期能使大规模工业系统中的人因失误分析更加合理和完善。     

对安全人性化需求规律的研究

以人为本是现代安全管理的重要原则 ,在生产经营活动中 ,保障人的生命更安全、更健康 ,生活更幸福 ,既是安全管理的重要目的 ,也是人类生活的必然需求。但是 ,人民提高生命质量的安全需求是多方面的、复杂的。通过对人类生存、繁衍和发展的历史进行深入分析发现 ,人的安全需求与马斯洛的层次需求理论有相似之处 ,虽然内涵不同 ,但需求总是由低层次向高层次发展 ,当一种低层需求得到满足后 ,更高层次的需求就占据支配地位 ,成为人的行为激励因素。笔者从人性化的角度对安全需求层次类型、每一层次的特征、发展规律进行了探讨 ,其结果有助于安全管理有针对性、科学性、时效性地进行宏观决策和微观调控 ,也有助于更好地增加安全投入 ,从而提高安全生产水平。把握人性化需求规律 ,对保护人们在生产过程中的安全和健康 ,处理好人的生命价值与安全生产、经济效益、社会效益之间的关系 ,有重要的现实意义。     

实施OSHMS对企业职业安全健康管理状况影响分析

为了研究实施职业安全健康管理体系(OSHMS)对企业职业安全健康管理状况的影响,对百余家已实施与未实施OSHMS的企业进行了调研,在对调研结果分析研究的基础上,采用双对照分析的方法,对已通过OSHMS认证的企业在建立OSHMS前后的职业安全健康管理状况进行对照比较,以及已建立OSHMS与未建立OSHMS的企业的职业安全健康管理状况进行对照比较,研究结果表明,实施OSHMS有利于提高企业职业安全健康管理的整体水平,改善企业的职业安全健康管理状况,使职业安全健康管理更加科学化和规范化。     

Performance evaluation of reverse logistics enterprise – an agent-based simulation approach

Reverse logistics (RL) has been applied in many industries and sectors since its conception. Unlike forward logistics, retracing consumer goods from the point of consumption to the point of inception is not a well-studied process. It involves many uncertainties such as time, quality and quantity of returns. The returned products can be remanufactured, have parts harvested, or be disposed safely. It is important to implement these activities in a cost-effective manner. The aim of this research is to measure the performance of the RL enterprise with the help of an agent-based simulation model. The major entities in the RL network are considered as Agents that can act independently. There are several different agents: collector agent, sorting-cum-reuse agent, remanufacturing agent, recycler agent, supplier agent and distributor agent. The individual performances of the agents are measured and recommendations are given to improve their performance, leading to the enhancement of the total performance of the RL enterprise. The approach is applied to a case study involving cell phone remanufacturing.