聚苯乙烯/CdS/TiO_2双壳层核壳纳米颗粒可见光催化降解甲基橙

采用溶胶-凝胶法,在聚苯乙烯(PS)/CdS核壳纳米颗粒表面包覆致密TiO_2层,制备出具有双壳层结构的PS/CdS/TiO_2纳米复合颗粒,考察了制备条件对材料结构的影响,并利用甲基橙溶液对其光催化性能进行了评价。SEM、TEM、XRD和FTIR分析结果表明,制得的微球单分散性良好,壳层包覆完整,厚度均匀。PS/CdS/TiO_2制备的适宜反应时间为12~18 h,适宜反应pH为7~9。PS/CdS/TiO_2较PS/CdS具有更为优异的可见光催化性能。     

MoS_2/Bi_2S_3异质结光催化剂的制备及其光催化性能

以五水硝酸铋为铋源、钼酸钠为钼源、硫脲为硫源,采用简单的一步水热法合成了MoS_2/Bi_2S_3异质结光催化剂,采用XRD,SEM,TEM,BET,UV-Vis DRS技术对其进行了表征。表征结果显示,MoS_2纳米片在Bi_2S_3微棒表面生长,增加了比表面积和活性位点,并形成异质结构,促进了光生载流子的迁移,抑制了电子-空穴对的再复合。实验结果表明:钼酸钠与五水硝酸铋的质量比为1∶2时制备的复合光催化剂性能最好,反应180min时对亚甲基蓝的去除率可达96.4%,明显高于MoS_2和Bi_2S_3,且具有较高的稳定性;该催化剂对罗丹明B、甲基橙和4-硝基苯酚的去除率分别为97.1%、93.1%和90.5%,表明其对污染物具有普适性。     

PW_(12)/g-C_3N_4光催化降解甲基橙

采用浸渍法制备了磷钨酸(PW12)/g-C3N4复合光催化剂,并将其用于溶液中甲基橙的光催化降解,运用IR技术对使用前后的光催化剂进行了表征。表征结果显示,PW12和g-C3N4的结构未在浸渍负载中发生改变,且PW12和g-C3N4结合牢固。实验结果表明:最佳的PW12负载量(光催化剂中PW12的质量分数)为50%;光催化降解甲基橙的优化反应条件为初始甲基橙质量浓度5 mg/L、光催化剂加入量0.6 g/L、初始溶液p H=7;在优化条件下,分别采用紫外光、模拟太阳光、可见光照射120 min后,甲基橙的降解率分别为96.59%,82.23%,42.78%;该光催化剂固载良好,使用中不易发生溶脱,稳定性好,可重复使用。     

纳米铁酸镍的制备及可见光催化性能研究

利用水热法制备了纳米铁酸镍,表征了其微观结构和光谱性能,并以罗丹明B溶液作为目标污染物,研究了铁酸镍催化剂的可见光催化性能。结果表明:所制备铁酸镍的微观形貌为由直径200-300 nm左右的类似球形小颗粒组成的大颗粒,平均粒径为95.60 nm,在紫外-可见光谱区均有较强的光吸收。光催化过程中催化剂的适宜用量为0.05 g,少量H2O2的加入有助于提高罗丹明B溶液的降解率。催化剂用量为0.05 g,加入0.4 mL 30%的H2O2,降解50 mL 20 mg/L罗丹明B溶液,模拟太阳光照射240 min后降解率能够达到99.2%。在实际太阳光照射下,240 min后罗丹明B溶液的降解率可以达到85.2%。     

Characterizing the optimal operation of photocatalytic degradation of BDE-209 by nano-sized TiO2

Brominated flame retardants have been widely used in industry. There is a rapid growing public concern for their availabilities in the environment. Advanced oxidation process (AOP) is a promising and efficient technology which may be used to remove emerging chemicals such as brominated flame retardants. This project aims at investigating optimal operational conditions for the removal of BDE-209 using nano-scaled titanium(IV) oxide. The residual PBDE congeners after photocatalytical degradation of BDE-209 by TiO₂ were analysed by gas chromatography-mass spectrometry (GC-MS). It was found that the degradability of BDE-209 by TiO₂ was attributed to its photocatalytic activity but not the small size of the particles. The half-life of removing BDE-209 by TiO₂ was 3.05 days under visible light. Tetra- and penta-BDEs were the major degraded products of BDE-209. Optimum conditions for photocatalytical degradation of BDE-209 was found to be at pH 12 (93% ± 1%), 5, 10, 20 mg/L (93.0% ± 1.70%, 91.6% ± 3.21%, 91.9% ± 0.952%, respectively), respectively of humic acid and in the form of anatase/rutile TiO₂ (82% ± 3%). Hence, the efficiency of removing BDE-209 can be maximized while being cost effective at the said operating conditions.     

Synthesis of TiO2 nanoparticles in different thermal conditions and modeling its photocatalytic activity with artificial neural network

Titanium dioxide (TiO₂) nanoparticles were prepared by sol gel route. The preparation parameters were optimized in the removal of 4-nitrophenol (4-NP). All catalysts were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). An artificial neural network model (ANN) was developed to predict the photocatalytic removal of 4-NP in the presence of TiO₂ nanoparticles prepared under desired conditions. The comparison between the predicted results by designed ANN model and the experimental data proved that modeling of the removal process of 4-NP using artificial neural network was a precise method to predict the extent of 4-NP removal under different conditions.     

含钛高炉渣制光催化剂降解水中2,4-二氯酚的研究

以攀钢含钛高炉渣为原料制备了光催化剂,并将其用于降解水中2,4-二氯酚,研究了光催化剂投加量、光照强度、反应物浓度、反应时间对2,4-二氯酚降解率的影响。结果表明:高炉渣制光催化剂对2,4-二氯酚具有良好的光催化效果,在催化剂投加量为0.3g/L,光照时间为2h的条件下,浓度为50mg/L的2,4-二氯酚的降解率达到了77.1%。通过反应的动力学分析,确立出高炉渣制光催化剂对水中2,4-二氯酚的降解反应为一级反应。对2,4-二氯酚的光催化降解产物进行分析发现,苯环上的C—Cl键被光催化剂产生的羟自由基·OH氧化断裂,氯取代基成为游离Cl-存在于溶液中,2,4-二氯酚被·OH降解生成中间小分子有机产物,这些小分子有机物再进一步被光催化降解。     

交联壳聚糖-CdS颗粒可见光催化脱色甲基橙研究

利用壳聚糖对金属离子的配位络合作用和吸附性能,模拟生物矿化仿生制备交联壳聚糖/CdS复合粒子。以甲基橙为处理对象,氙灯模拟可见光,研究了该复合材料对甲基橙的降解脱色性能。用Langmuir-Hinshelwood方程从动力学的角度,考察了不同催化剂浓度、甲基橙的初始浓度、反应体系的pH值、外加无机阴离子等对甲基橙降解脱色的影响。结果表明,该复合材料的吸附性能和光催化活性产生的协同作用能较有效促进甲基橙染料的脱色,在低质量浓度条件下可见光催化过程为假一级反应。光催化剂的最佳用量为1.5g/L,甲基橙降解的最佳pH为4.0。Cl-和Br-均对MO的光催化脱色起抑制作用,而NO3-的添加明显促进MO的光催化速率。     

响应面方法优化光催化降解抗生素类污染物过程研究

近年来抗生素类污染物对环境的影响及其生态毒性日益引起广大研究者的关注。对TiO2光催化降解典型抗生素类污染物磺胺二甲嘧啶（SMT）进行了研究。采用中心组合设计方法（CCD）进行试验设计,使用响应面方法（RSM）对光催化过程中的影响因素（TiO2浓度、初始磺胺二甲嘧啶浓度、双氧水浓度）进行了探讨和分析,并对反应过程进行了优化。优化结果表明,最佳反应条件为：TiO2浓度1.74 g/L、初始磺胺二甲嘧啶浓度20.0 mg/L、双氧水浓度106.28 mg/L,在优化条件下的磺胺二甲嘧啶光催化实际去除率为83.6%。响应面方法能够优化光催化条件,预测光催化结果,有利于优化光反应器的设计,对于工程化光催化水处理技术的发展具有一定的参考价值。     

改性TiO2的制备、表征及光解水制氢性能研究

以陶粒为载体,采用改进的溶胶-凝胶法制备B、Ni共掺杂陶粒负载纳米TiO2光催化剂。利用XRD,TG-DTA,FT-IR等手段对其组成、结构等进行分析和表征。以250 W紫外灯为光源,三乙胺为目标污染物和电子给体,考察了B-Ni2O3-TiO2/陶粒合成体降解污染物耦合光解水制氢的光催化性能;结果表明：所制得的B-Ni2O3-TiO2/陶粒催化剂具有较高的产氢效率,并探讨了焙烧温度、三乙胺溶液初始浓度等对催化剂光催化活性的影响。