Prediction of vortex height from mechanical mixing in metal matrix nanocomposite processing by means of dimensional analysis and scaling

Mechanical mixing can be used for initial dispersion and distribution of nanoparticle agglomerates in metal matrix nanocomposite (MMNC) fabrication. As vortex height increases, flow is enhanced as well as the risk of oxidate melt contamination. The goal of this study was to examine and predict vortex height using dimensional analysis while varying fluid and the angular speed of a pitched square-blade impeller. An equation proposed by Markopoulos et al. was verified for the present experimental conditions. The relevant dimensionless numbers were the Reynolds (Re), Froude (Fr) and Galilei (Ga) numbers. A modified Fr was defined (Fr*) including the shaft and blade angles of the impeller. Experiments allowed calculation of the dimensionless numbers. Two fluids, water and 50 vol% aqueous glycerine, were used. Angular clockwise speed varied from 200 to 900 rpm in 100 rpm increments. Vortex height was measured in lateral view digital images. Correlations of the dimensionless numbers yielded, first, a linear relationship of the product of dimensionless vortex height (H) and specific gravity (ρ*) with respect to Fr*. A polynomial relationship was found between H and ReFr* for each fluid. The polynomial coefficients, in turn, follow a power law behavior with respect to Ga. This allows a prediction of vortex height in other Newtonian fluids that satisfy the single-phase isothermal flow condition. Perhaps, molten aluminum used in MMNC fabrication, can be analyzed based on a simple, room temperature, low cost transparent fluid system. For the experimental conditions in this study, the equation proposed by Markopoulos et al. was valid. The predicting methodology was verified with experimental results using 25 vol% aqueous glycerine, resulting in an absolute percent error of 5.29%, comparable and lower than an error of 9.12% obtained by predicting vortex height with Markopoulos’ equation.     

厌氧系统中碱处理对污泥减量的影响

碱解预处理污泥和原污泥按一定比例进行混合后,投入厌氧反应器中进行消化,研究其对污泥减量化的影响。结果表明,该处理既可以提高污泥减量率,又能改善污泥厌氧消化性能,提高污泥产气量。当碱处理污泥和原污泥混合比为1∶3时,在混合初期由于稀释作用和水解中和作用,溶液的pH能迅速恢复到中性。SS减少48%,较对照组提高了10%;SCOD减少约80%,较对照组提高20%,而空白对照组因未发生溶胞作用,各参数值均处于较低水平,降解率也维持在较低水平。     

利用SPAMS研究华北乡村站点(曲周)夏季大气单颗粒物老化与混合状态

利用单颗粒气溶胶飞行时间质谱(SPAMS)于2013年6月30日~7月8日对华北地区乡村站点曲周大气单颗粒粒径及其化学组成进行了在线测量,共采集到同时含有正负离子谱图的颗粒230 152个,其粒径主要集中在0.2~2.0μm.结果表明,该地区的大气颗粒物主要分为8类:元素碳(EC,55.5%)、有机碳(OC,10.7%)、钠,钾等碱金属颗粒(alkalis,17.4%)、其他金属颗粒(other metals,1.7%)、富铁颗粒(Fe-rich,6.3%)、富铅颗粒物(Pb-rich,3.1%)、沙尘颗粒(dust,4.8%),other颗粒(0.8%),观测得到的8类气溶胶颗粒中绝大部分包含46NO-2、62NO-3、80SO-3、96SO-4、97HSO-4等二次组分离子,说明这些颗粒都经历了不同的老化过程或与二次组分进行了不同程度的混合.从气溶胶类型的谱分布看,各类型颗粒数浓度峰值基本出现在700~800 nm之间,dust、Fe颗粒主要集中在粗粒径段,EC颗粒子类研究表明随着表面不断吸附NH+4、NO-3、SO2-4等二次组分,EC颗粒逐步演化成老化程度较低的NO-3吸附型EC(ECN)和严重老化的SO2-4吸附型EC(ECS)混合态,两者日变化呈现明显的负相关性,也可能随着二次有机物在EC表面吸附,形成OC/EC混合态.     

Integrating soil carbon cycling with that of nitrogen and phosphorus in the watershed model SWAT: Theory and model testing

In this paper we describe and test a sub-model that integrates the cycling of carbon (C), nitrogen (N) and phosphorus (P) in the Soil Water Assessment Tool (SWAT) watershed model. The core of the sub-model is a multi-layer, one-pool soil organic carbon (S_C) algorithm, in which the decomposition rate of S_C and input rate to S_C (through decomposition and humification of residues) depend on the current size of S_C. The organic N and P fluxes are coupled to that of C and depend on the available mineral N and P, and the C:N and N:P ratios of the decomposing pools. Tillage explicitly affects the soil organic matter turnover rate through tool-specific coefficients. Unlike most models, the turnover of soil organic matter does not follow first order kinetics. Each soil layer has a specific maximum capacity to accumulate C or C saturation (S_x) that depends on texture and controls the turnover rate. It is shown in an analytical solution that S_x is a parameter with major influence in the model C dynamics. Testing with a 65-yr data set from the dryland wheat growing region in Oregon shows that the model adequately simulates the S_C dynamics in the topsoil (top 0.3 m) for three different treatments. Three key model parameters, the optimal decomposition and humification rates and a factor controlling the effect of soil moisture and temperature on the decomposition rate, showed low uncertainty as determined by generalized likelihood uncertainty estimation. Nonetheless, the parameter set that provided accurate simulations in the topsoil tended to overestimate S_C in the subsoil, suggesting that a mechanism that expresses at depth might not be represented in the current sub-model structure. The explicit integration of C, N, and P fluxes allows for a more cohesive simulation of nutrient cycling in the SWAT model. The sub-model has to be tested in forestland and rangeland in addition to agricultural land, and in diverse soils with extreme properties such high or low pH, an organic horizon, or volcanic soils.     

拱形抗滑桩墙支护结构体系模型试验相似材料研制

根据模型试验相似比尺和桩土间应力协调要求,用机制砂、河砂、水泥、石粉等配置了40组(每组6个)低强度、低弹性模量的圆柱形微混凝土相似材料试件.测试结果表明:微混凝土具有和原型混凝土大致相同的应力应变阶段和破坏模式,可以模拟原型结构的力学行为和变形、破坏特征.砂率和石粉取代率不同时,微混凝土试件的轴压强度和弹性模量在较大...     

生活垃圾焚烧飞灰固化体力学及重金属浸出特性

以苏州七子山生活垃圾焚烧厂产生的飞灰为研究对象,采用水泥作为固化剂,研究水泥飞灰固化体的应力应变特征及重金属浸出特性,并探讨了水泥飞灰配合比、养护时间等关键性因素对这些特性的影响。实验结果表明:较养护3 d的样品,其余养护时间的样品强度平均增长了约96.2%,而其破坏应变平均减小了56%。随着水泥含量和养护时间的增加,飞灰固化体的强度上升,而其破坏应变减小,该趋势主要归因于钙矾石(AFt)的形成促进了飞灰固化体强度的发展。较飞灰原样,飞灰固化体的重金属浸出浓度随着水泥含量、养护时间的增加而降低了38%~99%,重金属的迁移被限制,主要归因于水化硅酸钙(C—S—H)和钙矾石(AFt)的形成,以及飞灰和水泥水化反应创造的强碱性环境。     

南京北郊春季气溶胶吸湿性分析

大气气溶胶的吸湿性对气溶胶粒子的谱分布、云凝结核形成、气候强迫、人体健康等均有重要的影响.利用吸湿性串联差分迁移率分析仪(HTDMA)在2014年4月16日~5月21日对南京北郊的大气气溶胶吸湿特性进行观测.30~230 nm气溶胶粒子在90%相对湿度下的吸湿增长观测结果表明,气溶胶粒子的吸湿增长因子平均概率分布函数(GF-PDF)呈现明显的双峰分布,即一个占主导地位的强吸湿模态,和一个相对较小但仍很明显的弱吸湿模态.对吸湿性的日夜对比分析发现,整体上白天的气溶胶粒子吸湿性大于夜间气溶胶粒子,白天强吸湿模态的粒子数目比例高于夜间,夜间气溶胶粒子的外混合程度更高.利用HYSPLIT模式对气溶胶来源分析结果表明,观测期间南京北郊主要受到3类气团的影响.其中西北大陆气团背景下爱根核模态粒子在经过大陆的长距离输送过程后,老化程度较高,吸湿性也更强.而对于积聚模态粒子,则为来自东方气团的粒子吸湿性更强,强吸湿模态粒子数目比例也较高.局地气团背景下气溶胶粒子在各粒径段都具有较高的强吸湿比例.     

软土地铁隧道盾构工法端头井加固稳定性分析

以上海地铁10号线盾构隧道的进出口端头井加固为例,说明软土地区盾构端头井基坑的加固方法,重点说明高压旋喷桩和三轴搅拌桩联合加固在软土地区的应用和用FLAC软件对加固后土体进行稳定性分析。表明此种方法在软土盾构端头井加固的设计和施工的实用性,为以后同类工程的设计和施工起到一定的借鉴作用。     

袋式除尘器在沥青混凝土搅拌设备上的应用

分析了沥青混凝土搅拌设备的构成以及生产沥青混凝土的工艺及烟尘特点;通过应用工程实例,指出袋式除尘器是沥青混凝土搅拌设备最理想的除尘系统之一。     

Molecular composition of recycled organic wastes,as determined by solid-state 13C NMR and elemental analyses

Using solid state ¹³C NMR data and elemental composition in a molecular mixing model, we estimated the molecular components of the organic matter in 16 recycled organic (RO) wastes representative of the major materials generated in the Sydney basin area. Close correspondence was found between the measured NMR signal intensities and those predicted by the model for all RO wastes except for poultry manure char. Molecular nature of the organic matter differed widely between the RO wastes. As a proportion of organic C, carbohydrate C ranged from 0.07 to 0.63, protein C from <0.01 to 0.66, lignin C from <0.01 to 0.31, aliphatic C from 0.09 to 0.73, carbonyl C from 0.02 to 0.23, and char C from 0 to 0.45. This method is considered preferable to techniques involving imprecise extraction methods for RO wastes. Molecular composition data has great potential as a predictor of RO waste soil carbon and nutrient outcomes.