Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

硫酸法钛白生产水洗工序清洁生产技术初探

通过开展水洗工段用水审计并试验了温度、偏钛酸ξ电位和漂白工艺对水洗的影响效果，从实践和理论上探讨了为其提高钛白质量改进水洗工艺的清洁生产方案的可行性和合理性。     

绿色制造在机电产品全生命周期中的实施探讨

就机电产品从制造到报废回收的全生命周期中对环境的影响进行分析，提出了实行绿色制造的必要性。对绿色制造的产生、涵义、实施绿色制造的意义及其实施办法进行了论述。重点分析了机电产品的设计、毛坯制造、机械加工、热处理、装配、包装、使用和维修、报废回收等全周期各环节中可能带来环境污染的因素，提出了减少污染、实施绿色制造的措施与建议。     

染化废水厌氧生物处理技术的研究

鉴于厌氧微生物对偶氮染料的还原裂解作用，开发了以易降解工业有机废水作为外加碳源的染化废水厌氧生物处理的新技术．试验结果表明：在进水ＣＯＤ３１００—３５００ｍｇ／Ｌ，ＣＯＤ总／ＣＯＤ染化比值４０，ＨＲＴ３．０ｄ下，ＣＯＤ去除率＞８０％，最低染化ＣＯＤ去除率＞４５％，色度去除率＞８５％；实验证实，在厌氧处理过程中，染料组分的结构已发生了明显的变化；反应器内的污泥大多呈颗粒状；污泥活性和工艺性能可控制工艺运行参数得以维持．     

冲模寿命与模具维修

针对我国模具寿命偏低现象 ,提出了通过规范冷冲模刃磨、修理行为 ,既可提高冷冲模寿命 ,又可大幅降低产品成本     

关于现代模具制造的研究

此文构造了面向工艺过程规划的现代模具制造框架,并与传统模具制造相对比,总结出现代模具制造的主要特点,存在的问题及相应对策。     

企业低碳制造战略分类研究:以水泥企业为例

随着气候变化加剧,低碳发展已成为政府和学者关注的重要议题。降低工业碳排放成为实现我国经济可持续发展的当务之急。低碳制造战略是工业企业实现战略转型、应对碳排放约束和提升市场竞争力的可行策略之一,但企业低碳制造战略的研究正处于起步阶段,还缺乏低碳制造战略类型的认识。为此,本文在拓展企业制造战略竞争优先权结构要素的基础上,增加能源利用率和单位产品二氧化碳排放量为竞争优先权结构要素,构建低碳制造战略竞争优先权分类指标,由此探索企业低碳制造战略类型。本文以国内22个省(自治区、直辖市)所辖的137家水泥企业为研究对象,运用聚类分析方法,识别企业低碳制造战略的类型,结果表明:企业低碳制造战略可划分为三种类型,分别是设计者、看守者和低碳践行者。研究结果不仅有助于深入了解水泥企业低碳制造战略特点,为我国水泥企业低碳制造战略制定和实施提供决策依据,而且其理论成果也可推广至其他高耗能产业,创新引导企业有效实施基于产品全生命周期的企业低碳制造战略。     

化学药品原料药制造业自行监测技术指南设计研究

通过分析化学药品原料药制造业的基本情况、产品种类和生产工艺,以及自行监测技术指南编制的目的和基本要求,梳理出确定监测点位和对应多项污染物排放标准为目前该行业自行监测技术指南编制工作的难点。根据以上分析,提出将指南按工艺类型拆分、监测点位和废气监测指标的确定、监测频次的优化、生产记录内容的设定列为指南编制工作的重点。     

The impact of ISO 14001 on corporate environmental performance: a study of Swedish manufacturing firms

The debate concerning the environmental effectiveness of environmental management systems (EMS) based on ISO 14001 is still open and scholars have called for further studies that can explain the contrasting evidence in previous research. As a response, this study aims to contribute knowledge about the effects of ISO 14001-based EMS by presenting fact-based environmental data. The study focuses on changes in performance over a period of 12 years and includes both firms with an EMS (66 firms) and firms without one (50 firms). Consideration is given to the improvement efforts in the firms before EMS adoption making it possible to neutralize any selection effects where better environmental performance precedes ISO 14001 adoption. Analysis has been carried out using statistical methods for six different environmental areas. No statistically significant differences between certified and non-certified firms concerning the change in the rate of improvement could be found in any of the six areas. However, it can be suspected that EMS adoption has positive effects on energy use and waste production whereas the non-adopting firms seem to perform better concerning air emissions. These mixed results mirrors previous research, which is rather worrying considering the worldwide popularity of EMS based on ISO 14001 in industry.     

Computing sustainable manufacturing index with fuzzy analytic hierarchy process

The growing industrial interest in adopting sustainability programmes has ushered in studies regarding sustainability indicators which have continually flourished in current literature. However, limited attention is given to the development of priority ranking, which is an important input for any adopting firm. This paper presents a hybrid multi-criteria approach in determining priority areas in sustainable manufacturing (SM). Using fuzzy analytic hierarchy process to address uncertainty in hierarchical decision-making, this paper determines SM priority strategies and eventually identifies even lower level strategies. The computed sustainable manufacturing index is presented at both the organizational and operational levels for a real case study of an industrial plastic manufacturing firm. This work provides a detailed and transparent hierarchical decision-making approach based on SM framework, the use of which could be valuable to practicing managers across industries in their pursuit of greater sustainability.