天然河流纵向离散系数的最优化计算方法及其应用

提出了计算天然河流纵向离散系数的最优化方法，并用此法对岷江蕨溪段的试验数据进行处理，计算出了该段河流的纵向离散系数。     

污水处理场改造中浮选工艺单元的优化

浮选工艺在国内是比较成熟的工艺，但是更先进的工艺技术在待进一步的开发和利用，借我厂污水场改扩之机，从理论上论证隐厂所选用的先进而独特的工艺技术--一级浮选采用生化出水分流的方式，此种方法能耗最低，去除率最高，值得推广和应用。     

Graphical strategies for design of evaporation crystallization networks for environmental wastewater applications

This paper introduces graphical strategies for the design of an evaporation/crystallization network for ternary wastewater environmental applications. Sources, sinks and other streams are located on a ternary composition diagram. While a source is any wastewater stream that has the potential to be recycled, a sink is any unit in the process that can accept sources. The proposed methodology is extremely simple to understand and implement, as it only requires basic solid-liquid phase equilibria data and uses lever arm principles to generate alternative process designs. Geometric constructions are carried out on the ternary composition diagram and the respective lever arms are used to determine intermediate flow rates in the evaporation/crystallization network. The relative locations and flow rates of the sources and sinks under consideration, as well as the unique shape of the solid-liquid equilibrium, drive the design of the separation (via evaporation/crystallization) network. Some generic structures are proposed for a typical evaporation and crystallization network. Once the general problem statement has been defined, special cases consisting of a single source-single sink, single source-two sinks and two sources-single sink are described. These special cases are representative of commonly occurring industrial wastewater design problems. Several graphical insights are listed that allow one to represent evaporation and crystallization operations on a ternary triangular composition diagram and avoid mathematical complexity. The possibility of bypassing a part of the initial feed streams is also considered. Certain feasible composition regions are identified on the ternary composition diagram for cases dealing with multiple sources and sinks. The methodology is useful in pre-screening and eliminating certain sources/sinks and is readily applicable to cases with lower number of sources and sinks. A case study involving the ammonium nitrate manufacturing process is included to demonstrate the broad applicability and value of the proposed approach.     

阀门泄漏的原因分析及其设计选型的优化

通过分析各种阀门发生泄漏的原因，以及阀门泄漏对环境和生产所带来的危害，提出在工程设计中的优化阀门选型建议。     

Characterization of sulfide oxidation and optimization of sulfate production by a thermophilic Paenibacillus naphthalenovorans LYH-3 isolated from sewage sludge composting

The sulfur-containing odor emitted from sludge composting could be controlled by sulfide oxidizing bacteria, yet mesophilic strains show inactivation during the thermophilic stage of composting. Aimed to investigate and characterize the thermotolerant bacterium that could oxidize sulfide into sulfate, a heterotrophic strain was isolated from sewage sludge composting and identified as Paenibacillus naphthalenovorans LYH-3. The effects of various environmental factors on sulfide oxidation capacities were studied to optimize the sulfate production, and the highest production rate (27.35% ± 0.86%) was obtained at pH 7.34, the rotation speed of 161.14 r/min, and the inoculation amount of 5.83% by employing Box-Behnken design. The results of serial sulfide substrates experiments indicated that strain LYH-3 could survive up to 400 mg/L of sulfide with the highest sulfide removal rate (88.79% ± 0.35%) obtained at 50 mg/L of sulfide. Growth kinetic analysis presented the maximum specific growth rate µ_m (0.5274 hr⁻¹) after 22 hr cultivation at 50°C. The highest enzyme activities of sulfide quinone oxidoreductase (0.369 ± 0.052 U/mg) and sulfur dioxygenase (0.255 ± 0.014 U/mg) were both obtained at 40°C, and the highest enzyme activity of sulfite acceptor oxidoreductase (1.302 ± 0.035 U/mg) was assessed at 50°C. The results indicated that P. naphthalenovorans possessed a rapid growth rate and efficient sulfide oxidation capacities under thermophilic conditions, promising a potential application in controlling sulfur-containing odors during the thermophilic stage of sludge composting.     

污水汽提塔的优化设计与运行

通过分析当前污水汽提塔运行中存在的主要问题，提出了污水汽提塔设计与运行中的优化建议。增加汽提塔板数，净化水质量可控制在氨氮小于50mg／L，硫化物小于10mg／L；汽提塔做多段变径设计可大幅降低装置能耗，保持良好的气提效果。     

金陵石化炼油厂第二污水处理场改造工程介绍

金陵石化炼油厂第二污水处理场改造工程中对原有处理设施进行了工艺调整和优化，采用了均质，二级好氧生物处理及后浮选工艺，工程运行结果表明所采用的技术、设备是合理有效的。     

A multi-objective optimisation approach to water management

The management of river basins is complex especially when decisions about environmental flows are considered in addition to those concerning urban and agricultural water demand. The solution to these complex decision problems requires the use of mathematical techniques that are formulated to take into account conflicting objectives. Many optimization models exist for water management systems but there is a knowledge gap in linking bio-economic objectives with the optimum use of all water resources under conflicting demands. The efficient operation and management of a network of nodes comprising storages, canals, river reaches and irrigation districts under environmental flow constraints is challenging. Minimization of risks associated with agricultural production requires accounting for uncertainty involved with climate, environmental policy and markets. Markets and economic criteria determine what crops farmers would like to grow with subsequent effect on water resources and the environment. Due to conflicts between multiple goal requirements and the competing water demands of different sectors, a multi-criteria decision-making (MCDM) framework was developed to analyze production targets under physical, biological, economic and environmental constraints. This approach is described by analyzing the conflicts that may arise between profitability, variable costs of production and pumping of groundwater for a hypothetical irrigation area.     

Sustainable pattern analysis of a publicly owned Material Recovery Facility in a fast-growing urban setting under uncertainty

Sustainable development goals are achievable through the installation of Material Recovery Facilities (MRFs) in certain solid waste management systems, especially those in rapidly expanding multi-district urban areas. MRFs are a cost-effective alternative when curbside recycling does not demonstrate long-term success. Previous capacity planning uses mixed integer programming optimization for the urban center of the city of San Antonio, Texas to establish that a publicly owned material recovery facility is preferable to a privatized facility. As a companion study, this analysis demonstrates that a MRF alleviates economic, political, and social pressures facing solid waste management under uncertainty. It explores the impact of uncertainty in decision alternatives in an urban environmental system. From this unique angle, waste generation, incidence of recyclables in the waste stream, routing distances, recycling participation, and other planning components are taken as intervals to expand upon previous deterministic integer-programming models. The information incorporated into the optimization objectives includes economic impacts for recycling income and cost components in waste management. The constraint set consists of mass balance, capacity limitation, recycling limitation, scale economy, conditionality, and relevant screening restrictions. Due to the fragmented data set, a grey integer programming modeling approach quantifies the consequences of inexact information as it propagates through the final solutions in the optimization process. The grey algorithm screens optimal shipping patterns and an ideal MRF location and capacity. Two case settings compare MRF selection policies where optimal solutions exemplify the value of grey programming in the context of integrated solid waste management.     

一株产絮凝剂的黑曲霉的分离及培养条件优化

从活性污泥中筛选出一株产絮凝剂的霉菌,初步鉴定为黑曲霉(Aspergillus niger).其所产生的微生物絮凝剂对高岭土悬浊液具有良好的絮凝作用.通过培养条件优化,其所产生的微生物絮凝剂对高岭土悬浊液的絮凝率从85.6%提高到98.7%,实验结果表明,(1)黑曲霉孢子最佳接种量为9.33×108 个/L;(2)产絮凝剂适宜的碳源为蔗糖,氮源为尿素,用量分别为30.00、1.600 g/L;(3)最佳培养条件为:查氏液体培养基初始pH 7.0,培养温度30℃,摇床转速180 r/min,培养时间120 h;(4)在最佳培养条件下微生物絮凝剂的产量为1.805 g/L;(5)絮凝性能比较结果表明,微生物絮凝剂的絮凝性能优于传统絮凝剂.