Connecting the Dots: Public Engagement with Environmental Data

Air pollution and other environmental hazards are often imperceptible and need to be made publicly visible. The paper argues for the importance of visualizations in drawing public attention to imperceptible hazards and in providing the public with access to empirical data describing the risks. It also argues for critical inquiry into hazards’ selective visibility as it is produced by visualizations. The impact of visualizations and their selective visibility are considered through the example of a public art project called Particle Falls installed in 2014 in Pittsburgh, a city with a long history of both ignoring air pollution and working to ameliorate this problem. I examine the impact and selective visibility of Particle Falls by considering the underlying production of data, as well as context and support systems for this visualization, and by comparing it with other visualizations of local air quality.     

基于多线程技术的中国海风暴潮数值预报可视化程序开发

首先简要介绍了中国海的风暴潮及灾害情况,对杭州湾一带的风暴潮进行了重点阐述。在风暴潮二维数值模型FBM的基础上开发了具有可视化界面的数值计算程序,能直观的显示风暴潮发展时历,包括风暴潮最大增水、台风风向和移速。采用了多线程技术,可节省时间,程序具有Windows风格的人机交互界面,操作方便。通过几个算例测试,本程序计算结果符合工程预报需要,可为同类研究做一些参考,具有推广意义。     

滑坡体三维构造及稳定性分析

采用体元技术建立滑坡体真三维模型,通过基本三棱柱体构建具有复杂曲面结构的空间组合体,每个单元都赋予不同的属性,为滑坡体三维稳定性分析提供基本的前、后处理功能.以此为基础,并结合三维极限平衡分析计算方法,开发了相关的滑坡三维模拟与稳定性分析软件,并成功应用于清江库岸大型滑坡的三维仿真计算.     

膜生物反应器中生物膜的生长特性

实验采用经甲苯培养驯化而成的单一假单胞菌菌种,通过分析平板式生物膜反应器内,不同阶段假单胞细菌生物膜干重、厚度、活性生物量和生物种群分布的变化,研究生物膜特性与降解效率之间的关系。实验结果表明,在挂膜初期生物膜迅速生长,生物量以及生物膜干重增长很快,有利于甲苯及营养物质的传输,降解效率也快速提升。随着生物膜的生长,生物量及干重也逐步增加,厚度逐渐增加使传质阻力不断增大,生物膜上层微生物的有机底物供应不足,使生物膜上层结构稀疏,最终维持一个甲苯的总传输量与生化降解量的平衡,生物量的生长与衰亡也达到动态平衡,形成了一个较高且稳定的降解效率。     

面向突发性水污染事件的三维可视化系统

针对突发性水污染事件的突发性、复杂性与潜在的次生衍生危害等特点,设计并开发了面向突发性水污染事件的三维可视化系统。对建设三维可视化系统的需求进行了分析,提出了系统的四层体系结构,基于三维地理信息系统World Wind组件,采用三维可视化环境建模、海量数据缓存机制以及基础地理信息集成等信息技术,开发了系统的基本应用与高级应用,将系统应用到2005年发生在松花江流域的突发性水污染事件中。实例表明:所设计的三维可视化系统具有集成性、可扩展性和较好三维表现力等特点,支持海量数据与复杂应用的集成与三维展示,为突发性水污染事件的空间模拟和决策支持提供支撑。     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

信息可视化在化工企业水环境安全影响评价中的研究及应用

运用data system.exe技术,对水环境评价系统功能模块进行设计;提出水环境影响评价信息可视化软件的设计方法;建立水环境污染因子数据信息可视化软件,并应用该软件对石油化工企业的水环境进行了初步的风险评价。结果表明:该软件能在识别污染因子数据信息的同时生成与之相匹配的直观的模拟环境图像,有助于管理者进行及时分析与决策;通过输入水环境污染因子监测值后,系统可以自动判定环境的污染的程度,并把对应环境质量的级别、环境的安全程度以及污染对人体与生物的影响程度在图中显示出来,能够有效地提高环境影响评价的可靠度;评价示意图中的评价因子可以根据需要进行增加或更换,有助于该系统的推广应用,建立的环境污染因子数据信息可视化模型具有很强的适用性。     

结合遥感影像的矿山开采沉陷专题信息三维表达

煤矿井下开采引发地表沉陷是一种严重影响生命财产和生产安全的工程形变灾害 ,其形变信息有效表达和精准制图可大大减少矿区变形控制的成本,为矿山安全生产、 保护煤柱留设、塌陷地治理、压煤村庄搬迁、破坏等级判定与损害补偿评估等方面提供 更可靠的技术保障。基于矿山地图、实时卫星遥感影像与开采沉陷变形预计结果等数据 ,采用GIS空间分析和三维可视化技术,对淮北朔里矿区地表移动与变形的下沉（W）、 水平移动（U）、水平变形（ε）、倾斜（i）和曲率（K）等形变类型进行了三维的专 题信息与应用表达,其专题信息能更加直观有效地表达与准确清晰描述开采沉陷的地理 位置、影响范围、受损害地物类型、形变方向与变形量大小等。     

一种基于GIS的地下洞室群风网解算可视化研究

为了实现地下洞室群火灾网络模拟的可视化,利用地理信息系统及C#语言研究开发了一种风网解算系统。该系统能实现通风网络图的绘制及自动编号、解算及显示火灾烟气可能蔓延的区域,并可为相关部门制定火灾应急救援预案时提供支持     

ERT技术在无机酸污染场地调查中的应用

利用高密度电阻率法对硫酸废液污染的场地进行污染调查,由于硫酸废液侵入土壤,使其介质的溶质浓度发生了改变,导致SO₄2-与地表潜水作用,电传导性提高,被污染土壤含盐量增加,但是电阻率降低与未被硫酸废液侵入的土层形成了一定的电性差异. 通过二维和三维电阻率层析成像(ERT)技术,圈定硫酸废液侵入土壤中的分布范围、侵蚀深度以及扩散羽流等,并对ERT结果进行土工试验异常验证. 结果表明:硫酸废液污染土壤的视电阻率小于6.0 Ω·m,污染区域长度达25.0 m,深度约4.0 m;地表土污染长度为12.0 m,表面宽度约4.0 m,污染土壤的总体积约为222.0 m3.