首页 | 本学科首页   官方微博 | 高级检索  
     检索      

添加H2O2加速低合金钢海水腐蚀的主要影响因素研究
引用本文:张慧霞,曾华波,邱日.添加H2O2加速低合金钢海水腐蚀的主要影响因素研究[J].装备环境工程,2012,9(6):47-50.
作者姓名:张慧霞  曾华波  邱日
作者单位:中船重工七二五研究所青岛分部 海洋腐蚀与防护国防科技重点实验室,山东 青岛 266071
摘    要:采用极化曲线、旋转圆盘电极试验和失重(质量损失)法研究了低合金钢在添加了H。o:的海水中腐蚀加速的主要影响因素。结果发现低合金钢在添加H2O2的海水中腐蚀加速主要受到了H2O2浓度、温度、搅拌速度和H2O2添加周期的影响。研究表明,搅拌速度不变、H2O2添加周期相同的条件下,在H2O2浓度为0.8mol/L的70℃海水中,低合金铜的腐蚀加速最显著;在试验的转速范围内,加速作用随搅拌速度增大变得更为显著;H2O2加入后350min内加速作用较明显。

关 键 词:低合金钢  加速  旋转圆盘电极试验  极化曲线  H2O2
收稿时间:2012/8/27 0:00:00
修稿时间:2012/12/15 0:00:00

Main Influencing Factors to Accelerate Low Alloy Steel Corrosion in Seawater by Adding H2O2
ZHANG Hui-xi,ZENG Hua-bo and QIU Ri.Main Influencing Factors to Accelerate Low Alloy Steel Corrosion in Seawater by Adding H2O2[J].Equipment Environmental Engineering,2012,9(6):47-50.
Authors:ZHANG Hui-xi  ZENG Hua-bo and QIU Ri
Institution:(State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Qingdao 266071, China)
Abstract:The main factors influencing the corrosion of low alloy steel by addingH2O2 into seawater was studied through potentiodynamic polarization curves, rotating disk electrode tests, and weight loss method. The results showed that the corrosion rate was the highest when H2O2was 0.8 mol/L and the solution temperature was 70 ℃. The acceleration effect turned remarkably while the stirring rate was enlarged. However, the acceleration effect was remarkable only in 350 min after adding H2O2into seawater.
Keywords:low alloy steel  acceleration  rotating disk electrode experiment  polarization curve  H2O2
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《装备环境工程》浏览原始摘要信息
点击此处可从《装备环境工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号